Loading ...
Loading ...
Loading ...
7.3 Dividing shelf
7.3.1 Using the dividing shelf
The shelves are prevented from being pulled out accidentally
by pull out stops.
Fig. 23
u
Push the dividing shelf underneath as shown.
Fig. 24
Adjusting the height:
u
Pull the glass panels out
Fig. 24 (1)
from the front, one at a
time.
u
Release the support rails and click in at the height you want.
u
Slide in the glass panels one at a time.
w
Flat pull-out stoppers at the front, right behind the support
rails.
w
High pull-out stoppers at the back.
Using both shelves:
u
Hold the glass panel with one hand and pull it to the front.
w
The glass panel
Fig. 24 (1)
and trim strip are at the front.
w
The stops
Fig. 24 (3)
point down.
7.4 Space for baking tray
There is space for a baking tray
Fig. 1 (6)
above the drawers.
Fig. 25
Ensure that the following conditions are met:
q
Max. baking tray dimensions are adhered to (see 9.1 Tech-
nical specifications) .
q
Baking tray is cooled to room temperature.
q
The lowest door rack is set at least one position higher.
With the door open to 90°:
u
Slide the baking tray onto the lower side runners.
-or-
If baking tray is uneven:
u
Use the supplied support rails.
Fig. 26
u
Snap support rails into the lowest runners.
With the door open to 90°:
u
Slide the baking tray in on the support rails.
7.5 Adjustable bottle shelf
7.5.1 Using the bottle shelf
In the bottom of the fridge section you can either use the vari-
able bottle shelf or the glass panel.
Fig. 27
u
Remove the glass panel and store in a safe place.
u
Lay bottles with their base towards the rear wall.
Note
If the bottles are protruding over the front of the bottle shelf:
u
Move the lower door rack up a place.
7.5.2 Removing the bottle shelf
You can remove the bottle shelf for cleaning.
u
Remove the glass panel above the bottle shelf.
Fig. 28
u
Lift the bottle shelf at the front and pull out.
Note
Liebherr recommends the following:
Do not place any goods on the drawer cover below.
Features
16 * Depending on model and options
Loading ...
Loading ...
Loading ...