Loading ...
Loading ...
Loading ...
Select the sub menu(Digital Output, DTS,
Dynamic Compression) using the AY buttons,
then press the ENTER or _- button.
Select the item that matches the audio
connection you've seiected on pages
21~23(Method 1, 2 and 3).
Dynamic Compression
This is only active when a Dolby Digital signal is detected.
• On : When movie soundtracks are played at low volume
or from small speakers, the system can apply
appropriate compression to make low-level content more
intelligible and prevent dramatic passages from getting
too loud.
• Off : You can enjoy the movie with standard Dynamic
Range.
Digital Output
• PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM if your amplifier system is stereo and/or
Dolby Prologic.
• Bitstream : Outputs bitstream (original format) such as
Dolby or DTS.
Select bitstream if your amplifier system has multi
channel digital audio surround decoding (Dolby Digital
and/or DTS).
5
Select the desired item(PCM, Bitstream, DTS-
Off, DTS-On, Dynamic Compression-Off or
Dynamic Compression-On) using the AY
buttons
Then press the ENTER or _ button.
= Press the RETURN or _ button to return to
the previous menu.
_or'E Press the MENU button to exit the menu.
DTS
• On : Outputs DTS bitstream. (via Digital Audio
Output)
Select DTS when connecting to a digital amp with
DTS decoder.
• Off : Doesn't output DTS bitstream (original format).
• When DTS soundtrack is played, sound is not output
from Analog Audio Output.
English - 33
Loading ...
Loading ...
Loading ...