Loading ...
Loading ...
Loading ...
Programmable functions
90
Remote control
You can use the Miele app to check
the status of your washer-dryer from
anywhere and start it remotely. You
can also control it remotely via the
MobileStart programme.
You can switch off the program-
mable function if you do not want to
operate the washer-dryer with your mo-
bile device.
If the programmable function is not
switched on, the app can still be used
to cancel a programme.
Use the sensor control to set a time
period within which you want to start
the washer-dryer and start the delay
start function (see “Delay start/
SmartStart”). The washer-dryer will then
start within the specified timeframe
when it receives your signal. If it has not
received a start signal by the latest start
time set, the washer-dryer will start
automatically.
Options
= Off
= On (factory default)
SmartGrid
You can set your washer-dryer to start
automatically based on an external
signal within a certain time period.
If you have activated SmartGrid, the
sensor control will have the new
“SmartStart” function rather than the
“delay start” function.
Use the sensor control to set a
SmartStart time period. The washer-
dryer will then start within the time
period specified by you when it receives
an external signal. If an external signal
has not been received by the latest start
time set, the washer-dryer will start
automatically (see “Delay start/
SmartStart”).
Options
= Off (factory default)
= On
RemoteUpdate
The RemoteUpdate function is used for
updating the software in your washer-
dryer. If an update is available for your
washer-dryer, it will automatically
download it. Updates will not be in-
stalled automatically. They must be initi-
ated manually.
If you do not install an update, you can
continue to use your washer-dryer in
the usual way. However, Miele recom-
mends installing updates.
RemoteUpdate procedure
Information about the content and
scope of an update will be provided in
the Miele app.
Loading ...
Loading ...
Loading ...