Loading ...
Loading ...
Loading ...
Problem solving guide
58
Programme cancellation and fault indicator light
Problem Cause and remedy
The fault indicator
light lights up. and
alternate on the time
display and the buzzer
sounds.
The water inlet is blocked or restricted.
Check whether the stopcock has been properly
opened.
Check whether the water inlet hose is kinked.
Check whether there is sufficient water pressure.
The filter in the water inlet is blocked.
Clean the filter.
The fault indicator
light lights up. and
alternate on the time
display and the buzzer
sounds.
The drain is blocked or restricted.
The drain hose has been fixed too high.
Clean the drain filter and the drain pump.
Check whether the maximum delivery head of 1m
has been exceeded.
The fault indicator
light lights up. and
alternate on the time
display and the buzzer
sounds.
The water protection system has reacted.
Close the stopcock.
Call the Miele Customer Service Department.
and alternate on
the time display and the
buzzer sounds.
There is a fault.
Disconnect the washer-dryer from the electricity
supply. Switch off at the wall and withdraw the
plug from the socket, or disconnect the fuse.
Wait at least 2minutes before reconnecting the
washer-dryer to the electricity supply.
Switch the washer-dryer back on.
Restart the programme.
If the fault message appears again, contact the
Miele Customer Service Department.
Loading ...
Loading ...
Loading ...