Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
75
Aligning the washer-dryer
The washer-dryer must stand perfectly
level on all four feet to ensure safe and
proper operation.
Incorrect installation may increase elec-
tricity and water consumption and may
cause the washer-dryer to move about.
Screwing out and adjusting the feet
The 4 adjustable feet are used to level
the washer-dryer. The appliance is sup-
plied with all feet screwed in.
Using the open spanner supplied,
turn counter nut 2 in a clockwise dir-
ection. Then turn counter nut 2 to-
gether with foot 1 to unscrew.
Use a spirit level to check the
washer-dryer is standing level.
Hold foot 1 securely with a pipe
wrench. Turn counter nut 2 again us-
ing the open spanner supplied until it
sits firmly up against the casing.
Risk of damage from incorrectly
aligned washer-dryer.
There is a danger of the washer-
dryer moving about if the feet are not
secured.
Turn all 4 counter nuts for the feet
until they sit firmly up against the
casing. Please also check this for the
feet which did not need adjustment.
Loading ...
Loading ...
Loading ...