Loading ...
Loading ...
Loading ...
Problem solving guide
59
Fault indicator light lights up at the end of a programme
Problem Cause and remedy
The indicator light
lights up.
Excessive foam has built up during washing.
Use less detergent next time and follow the manu-
facturer’s instructions on dosage given on the
packaging.
is lit up on the time
display.
The programme selector was moved to a different
position after the programme had started.
Turn the programme selector back to the original
position.
The indicator light
lights up and appears
on the time display.
When washing, a wash programme using a temperat-
ure above 60°C has not been run for a long time.
Run the Cottons90°C programme using Miele
machine cleaner or a multi-purpose powder deter-
gent.
This will clean the washer-dryer and prevent a build-
up of bacteria and odours.
The indicator light
lights up and appears
on the time display.
TheRinse out fluff programme has not been used for
a long time.
Start the Rinse out fluff programme as described
in “Rinse out fluff”.
The indicator light
lights up and appears
on the time display.
There is no laundry in the drum.
The load is too small. The laundry is still damp be-
cause the residual moisture content in the laundry
cannot be measured.
In the future, use a Warm air programme for small
amounts of laundry.
The amount of laundry exceeded the maximum load
for the selected drying programme.
Observe the maximum load sizes given in the Pro-
gramme chart.
Loading ...
Loading ...
Loading ...