Loading ...
Loading ...
Loading ...
WASHING AND DRYING
47
Washing and drying in one
continuous sequence
It is advisable to wash and dry in a
continuous sequence when the
amount of laundry to be washed does
not exceed the amount to be dried
and the amount to be dried does not
exceed the permitted dry weight for
the programme.
It is very important to read the sec-
tions “Separate washing” and “Sep-
arate drying” before proceeding.
1. Prepare the laundry
Empty all pockets.
Sort the laundry according to colour
and type of fibre/weave.
Check the symbols on the care la-
bels.
2. Loading the washer-dryer
Open the door.
Check the drum for pets or foreign
objects before loading it with laun-
dry.
Unfold the laundry and load loosely
into the drum.
Detergent dispensing aids, e.g.
plastic dispenser balls, can melt dur-
ing the drying programme and cause
damage to the washer-dryer and the
laundry.
These dispensing aids must be re-
moved from the laundry before dry-
ing.
Close the door.
3. Selecting a programme
Turn the programme selector and se-
lect the required programme.
The control field lights up.
Touch the Washing and Drying sensor
control until both sensor controls are
brightly lit up.
4. Selecting programme set-
tings
Select the desired spin speed, tem-
perature and drying level.
The sensor controls for the selected
settings light up brightly.
The minimum spin speed cannot be
lower than 900rpm.
For some programmes the spin speed
cannot be changed.
To prevent laundry forming a ring
against the drum wall, the spin speed
is limited to a maximum of 1200rpm
when washing and drying in a continu-
ous sequence.
Select further extra options as re-
quired.
With the thermospin, the spin speed
displayed for the wash cycle is used.
Select a delay start time if required.
Loading ...
Loading ...
Loading ...