Loading ...
Loading ...
Loading ...
38 | PRODUCT DATA
Single Zone Mega Wall Mounted Engineering Manual
Due to our policy of continuous product innovation, some specications may change without notication.
©
LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG ” is a registered trademark of LG Corp.
ACCESSORIES
Actual inverter compressor speed
Target inverter compressor speed
Actual outdoor fan speed
Target outdoor unit fan speed
Actual superheat
Inverter compressor current value
Outdoor air temperature
Actual high pressure/saturation temperature
Actual low pressure/saturation temperature
Suction temperature
Inverter compressor discharge temperature
Outdoor coil pipe temperature
Liquid line pipe temperature
Inverter compressor operation indicator
light
Four-way reversing valve operation
indicator light
Pressure graph showing actual low pres-
sure and actual high pressure levels
Error code display
Operating mode indicator
Total number of connected indoor units (for
multi zone systems)
Communication indicator lights
Unit error code
Indoor unit capacity
Indoor unit operating mode
Indoor unit fan speed
Indoor unit room temperature
Indoor unit inlet pipe temperature
Indoor unit outlet pipe temperature
LG Monitoring View (LGMV) Diagnostic Software and Cable
(PRCTSL1 and PRCTFE1)
LGMV software allows the service technician or commissioning agent to connect a computer
USB port to the outdoor unit main printed circuit board (PCB) using an accessory cable with-
out the need for a separate interface device. The main screen for LGMV shall allow user to
view the following real time data on one screen:
Additional screens can be accessed by tabs on the main screen:
1. Cycleview: Graphic of internal components including:
2. Setting: Converts metric values to imperial values.
3. Making Data: Recording of real time data to a separate file created to be stored on the
user’s computer.
4. Loading Data: Recorded data from a saved “.CSV” file can be loaded to create an LGMV
session.
5. Electrical Data: The lower half of main screen is changed to show the following:
Compressors showing actual speeds
EEVs
IDUs
Low and high pressures
Temperature and pressure sensors
Four-way reversing valve
Outdoor fans showing status and speeds
Inverter compressor
- Amps
- Volts
-
Power Hz
- Inverter control board fan Hz
The software is available in a high version with all of the features listed above. The low version has all features as the high version without
Target High Pressure and Target Low Pressure values shown on main screen.
In lieu of connecting to the ODU, user has the option to connect to IDU with the use of a USB to RS-485 connector kit. When connected
through IDU, user will not be able to record data.
This software can be used to both commission new systems and troubleshoot existing systems. LGMV data can be recorded to a “.CSV” file
and emailed to an LG representative to assist with diagnostic evaluations.
Recommended Minimum PC Configuration:
CPU: Pentium
®
IV 1.6 GHz
Operating System: Windows
®
NT/2000/
XP/Vista
Main Memory: 256 MB
Hard Disk: 600 MB when operating
Web Browser: Internet Explorer
®
5.0
Loading ...
Loading ...
Loading ...