Loading ...
SECTION PAGE
Warranty ........................................................ 2
Product Specifications .................................... 2
Power Tool Safety ........................................... 3
Tabe! Saw Safety ............................................ 4
Electrical Reuirements and Safety .................. 5
Carton Content ................................................ 6
Know Your Table Saw ...................................... 8
SECTION PAGE
Assembly and Adjustments ............................. 9
Operation ........................................................ 17
Maintenance .................................................... 21
Troubleshooting Guide .................................... 22
Push Stick Pattern ........................................... 23
Parts List ......................................................... 24
ONE YEAR FULL WARRANTY
If this product fails due to a defect in material or workmanship within one year from the date of purchase, Sears
wil! repair it free of charge. Contact a Sears Service Center for repair.
If this product is used for commercial or rental purposes, this warranty applies only for 90 days from the date of
purchase. This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.
Sears, Roebuck & Co., Dept. 817 WA, Hoffman Estates, IL 60179
WARNINGn
Some dust crested by power sanding, sawing, grinding, drilling and other construction activities contains
chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
Lead from lead-based paints
Crystalline silica from bricks, cement and other masonry products
Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals, work in s well ventilated ares and work with approved safety equipment such as
dust masks that are specially designed to filter out microscopic particles.
MOTOR
HP (Maximum developed) ......................... 2.5
Type .......................................................... Universal
Amps ......................................................... 13
Voltage ...................................................... 120
Hz .............................................................. 60
RPM (no load) ........................................... 5000
Thermal Overload Protection .................... YES
SAW
Table Extension ............................ Right Side =8 in. Steel
Rip Capacity with Extension ......... 17-1/2 in.
Blade Size .................................... 10 in.
Rip Fence ..................................... YES
Miter Gauge ................................. YES
Maximum Cut Depth @ 900 .......... 3 in.
Maximum Cut Depth @ 450 .......... 2=1/2 in.
Maximum Diameter Dado ............. 6 in.
Maximum Dado Cut Width ............ 1/2 in.
l,&WARNmNGI
To avoid electrical hazards, fire hazards or dsmsge to the table saw, use proper circuit protection.
This table saw is wired st the factory for 110-120 Volt operation, tt must be connected to s 110-120 Volt /
15 Ampere time delay fuse or circuit breaker. To avoid shock or fire, replace power cord immediately if it is
worn, cut or damaged in any way.
Before using your table saw, it is critical that you read and understand these safety rules. Failure to follow
these rules could result in serious injury to you or damage to the table saw.
Loading ...
Loading ...
Loading ...