Loading ...
Loading ...
Loading ...
8
INSTALL THE ICEMAKER
(continued)
Step 5
The icemaker should feel secure
when you lift the icemaker
feeler arm (F) to the STOP (up)
position. Leave it there until the
refrigerator is connected to the
water supply to prevent
premature operation.
Arm up–stops
operation
Arm down–icemaker
will operate
F
Step 6
Put the ice bucket (11) directly
under the icemaker (to the left
and all the way to the rear of the
shelf under the icemaker).
NOTE: Check again to make
sure the icemaker power cord
plug is fully inserted into its
socket with the prongs matched
to the corresponding holes.
Check again to make sure the
icemaker feeler arm (F) is in the
STOP (up) position.
F
11
Step 8
The warranty for the icemaker
is printed in this guide. Keep
this guide with your
Refrigerator Use & Care Guide.
The icemaker installation inside
the freezer compartment is now
complete. Continue to the
Installing the Water Valve
Assembly section.
Step 7
A label (9) is provided in the kit
to record the date of installation
for warranty purposes. Apply it
to the back of the refrigerator.
Step 4
• Lift the icemaker so the fill tube
extension (10) fits in the fill cup
opening (E). Hang the icemaker
on the two mounting screws (C).
Make sure:
• The power cord plug is still
firmly in the socket.
• The fill tube extension (10) is
still in the fill cup opening. (Check
the rear of the refrigerator to
make sure the fill tube has not
been pushed out of the back of
the refrigerator.)
• The icemaker mounting screws
are located in the uppermost
position of the mounting slots.
THEN TIGHTEN THE
ICEMAKER MOUNTING
SCREWS SECURELY.
E
C
10
C
Loading ...
Loading ...
Loading ...