Loading ...
Loading ...
Loading ...
You may need to reposition the
freezer shelf so the icemaker and
bucket sit properly.
To reposition the two piece
shelf
supports:
Slide the shelf
up off the
base mount.
REMOVE EXISTING ICE TRAY HOLDER
Follow the instructions below for the ice tray holder that looks like yours.
• Unhook the ice tray holder
side and bottom from the
retaining hooks. Lower the
holder until the side is clear of
the freezer shelf and remove it
from the freezer. You will not
need this part.
Retaining hooks
• As you lift the tab on the left
side in the holder with the
blade of a screwdriver, pull
the holder forward and out.
You will not need this part.
• Remove the 2 screws and save
them for installation of the
icemaker.
• Lift the ice tray holder off the
plastic hook. You will not
need this part.
Screws
Plastic hook
When following Instruction G,
it is not necessary to remove the
ice tray shelf or, on some
models, the wire shelf next to it.
• Tilt the ice tray holder and
remove
it. You will not need
this part.
Shelf
support
Base
mount
Type 1
Type 2 Type 3
Type 4
• Remove the screw with a
1/4
″ nutdriver.
• Pull the ice tray shelf away
from the wall. Remove the
shelf. You will not need
this part.
• Replace the screw.
Screw
Type 5
REPOSITION FREEZER SHELF
6
Do not
lift here
Lift this
tab out
Loading ...
Loading ...
Loading ...