Loading ...
Loading ...
Loading ...
Cut the fill tube extension to this length for
A
7
INSTALL THE ICEMAKER
(continued next page)
Install the Icemaker
C
Step 1
• Remove the screw (A) that holds
the electrical plug cover in
place. You will not need this
screw and cover.
• Remove the light shield insert
(B) and discard it.
• Loosen the 2 screws (C)
approximately 1/2″ (13 mm).
DO NOT REMOVE THESE
SCREWS.
Cover
removed
B
C
A
Step 2
Cut the fill tube extension (10)
to the length (use the
template in this section) with a
sharp knife or single-edge razor
blade and slide it onto the fill
tube against the stop.
C
C
10
Step 3
Place the icemaker in the
freezer compartment on its side
as shown. Insert the icemaker
power cord plug (D) into the
socket on the side wall, making
sure the prongs and holes are
matched. Press the plug firmly
into the socket.
D
Is this the right instruction for your model?
Follow Installation indicated by the label on the back
of the refrigerator—C, F, G or H.
Installation Instructions
CAUTION: Unplug the Refrigerator. To eliminate the danger
of electric shock during installation, you must unplug the
refrigerator from its electrical outlet.
Read each step thoroughly before proceeding.
Tools needed:
• Phillips-type screwdriver
• Blade-type screwdriver
• Sharp knife
• Pliers
Loading ...
Loading ...
Loading ...