Loading ...
Loading ...
Loading ...
16
INSTALL THE ICEMAKER
H
Is this the right instruction for your model?
Follow Installation indicated by the label on the back
of the refrigerator—C, F, G or H.
Installation Instructions
CAUTION: Unplug the Refrigerator. To eliminate the danger
of electric shock during installation, you must unplug the
refrigerator from its electrical outlet.
Read each step thoroughly before proceeding.
Tools needed:
• Phillips-type screwdriver
• Blade-type screwdriver
• Sharp knife
• Pliers
Step 1
Remove the electric plug
cover from the left side wall
and discard it.
Remove the
screw and
pull the
cover off.
Step 2
Loosen the two mounting
screws (B) but do not screw
them all the way out. The screws
should extend approximately
1/2
″ (13 mm) out from the
freezer wall.
B
Step 3
• Remove and discard the white
plug from the upper left corner
of the freezer wall.
• Cut the fill tube extension (10)
to the length (use the
template in this section) with a
sharp knife or single-edge
razor blade and slide it onto
the fill tube against the stop.
H
H
10
Remove
plug
Cut the fill tube extension to this length for .
H
Loading ...
Loading ...
Loading ...