Loading ...
Loading ...
Loading ...
(HDMI-CEC) isn't Working
Confirm that the device is an Anynet+ device. The Anynet+ system supports
Anynet+ devices only,
Check if the power cord of the Anynet+ device is properly connected,
Check the cable connections of the Anynet+ device,
Go to Anynet+ (HDMI-CEC) ((MEINU/123) > IMENU > System > Anynet+ (HDM_-
Anynet+ does not CEC)) and see if Anynet+ (HDM_-CEC} has been set to On.
work. Check whether the TV remote control is in TV mode.
Check whether the remote control is Anynet+ compatible,
Anynet+ may not function when some other functions are active, including Channel
Search, Smart Hub, Initial Setup, etc.
If you have disconnected and then reconnected the HDMU cable, scan for devices
again or turn your TV off and on.
menu to see if Anynet+ (HDM_-CEC) is set to On.
I want to exit Anynet+ Select View TV from the Anynet+ menu°
" Select a non-Anynet+ device from the Source tist.
The message
"Connecting to You cannot use the remote control when you are configuring Anynet+ or switching
Anynet+ dev'ce_. ' to a viewing mode. Use the remote control after the TV has completed the Anynet+
or "Disconnecting configuration or has switched to a viewing mode,
from Anynet+ device"
appears on the screen,
CEC)) and see if Anynet+ (HDMI_CEC) has been set to On.
The connected device Scan for Anynet+ devices again.
is not displayed, Anynet+ devices must be connected to the TV using an HDMI cable. Make sure the
device is connected to your TV with an HDMI cable. Some HDMI cables may not
support Anynet+,
if the connection is terminated because there has been a power failure or the HDMI
cable has been disconnected, please scan for the device again.
Connect an optical cable to the TV and the receiver,
The TV audio is not
being played through ARC enables the TV to output digital sound via the HDMI (ARC) port,
the receiver, However, ARC is only available when the TV is connected to an audio receiver that
supports ARC,
Loading ...
Loading ...
Loading ...