Loading ...
Loading ...
Loading ...
Operation
36
Using the appliance
This ceramic hob is equipped with an
electronic On/Off sensor which re-
acts to finger contact. For safety reas-
ons, in order to switch the appliance on,
the On/Off sensor needs to be
touched for a little longer than the other
sensors.
Only the printed On/Offsymbol is
visible when the hob is switched off.
The touch display lights up when you
switch the hob on.
You operate the hob via the touch dis-
play by touching the menu option you
want.
Each time you touch the display, an
audible signal sounds.
Each time you touch a possible option,
the relevant characters (word and/or
symbol) light up orange.
Fields for confirming an operating step
are highlighted in green (e.g. OK).
Malfunction due to a dirty and/or
covered touch display.
If the touch display is dirty or
covered, this could cause it to fail to
react, to activate a function or even
to issue a fault message (see “Safety
features – Safety switch-off”). Pla-
cing hot cookware over the touch
display can damage the electronic
unit underneath.
Keep the touch display clean.
Do not place items over the touch
display.
Do not place hot cookware over the
touch display.
a
Touch display area
Loading ...
Loading ...
Loading ...