Loading ...
Loading ...
Loading ...
TROUBLESHOOTINGEN 49
Appears if there are no image files stored in the
memory card when you attempt memory card
playback
• Appears if Insert Editing is attempted on a
tape recorded in the LP mode ( pg 45)
• Appears if INSERT (o) on the remote control
is pressed when the erase protection tab is set
to "SAVE" ( pg 45)
• Appears if Insert Editing is attempted on a
blank portion of atape ( pg 45)
Appears when the camcorder does not
recognize the loaded memory card Remove the
memory card once and insert it again Repeat
these procedures until no indication appears If
the indication still appears, the memory card is
corrupted
LVJI:ILVJ[O):W[,._]i[IJlll4
Appears when the memory card's memory is full
and shooting is not possible
i _ Memory Card is set to the "LOCK" position
Appears when pictures recorded in the HDV
format are detected The pictures in the HDV
format cannot be played back with this
camcorder
type of malfunction has occured When an error
indication appears, the camcorder turns off
Appears when playing back a file that is not automatically Remove the power supply
compatible with DCF or a file with a size that is (battery, etc.) and wait a few minutes for the
not compatible with this camcorder indication to clear When it does, you can
resume using the camcorder Ifthe indication
o- • - • i remains, consult your nearest JVC dealer
Appears ifdubbing of copyguarded signals is
attempted while this camcorder is being used as
a recorder
e- , -i The error indications (03 or 04) show what type
of malfunction has occured When an error
Appears ifthere is no memory card loaded when indication appears, the camcorder turns off
the SNAPSHOT Button is pressed while the automatically Eject the cassette once and re
Power Switch is set to '<REC"and the VIDEO/ insert it, then check if the indication clears
MEMORY Switch is set to "MEMORY" When it does, you can resume using the
camcorder If the indication remains, consult
• ' _" ' your nearest JVC dealer
Appears when there is a problem with a memory
card and its memory is corrupt, or it has not
been initialized Initialize the memory card
( pg 30)
Appears when you attempt to shoot digital still
images when the write protection tab on the SD
The error indications (01, 02 or 06) show what
Loading ...
Loading ...
Loading ...