Loading ...
Loading ...
Loading ...
| ConnectionsToA TV OrVCR
To AV
connector
Audio/Video cable
(provided)
OYellow to VIDEO IN (Connect when your TV/
VCR has only A/V input connectors.)
ORed to AUDIO R IN*
_lWhite to AUDIO L IN*
* Not requiredfor watchingstill images only.
VIDEOPLAYBACKEN 23
1 Make sure all units are turned off.
2 Connect the camcorder to a TV or VCR as
shown in the illustration.
If using a VCR, go to step 3.
If not, go to step 4.
3 Connect the VCR output to the TV input,
referring to your VCR's instruction manual.
4 Turn on the camcorder, the VCR and the TV.
5 Set the VCR to its AUX input mode, and set
the TV to its VIDEO mode.
6Startplaybackonthecamcorder.("pg.21)
To choose whether or not the following
displays appear on the connected TV
• Date/Time
Set "DATE/TIME" to "ON" or "OFF".
( pg.31, 35)
Or, press DISPLAY on the remote control to turn
on/off the date indication.
• Time Code ,_
Set TIME CODE" to 'ON" or "OFF". o_
(pg.31,35)
• Indications other than date/time and time code
Set ON SCREEN" to "OFF", "LCD" or "LCD/TV". .=,
(pg.31,35)
NOTES:
• It is recommended to use the AC Adapter as o
the power supply instead of the battery pack.
(pg. 15)
• To monitor the picture and sound from the
camcorder without inserting a tape or memory
card, set the camcorder's Power Switch to REC",
then set your TV to the appropriate input mode.
• Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
Loading ...
Loading ...
Loading ...