Loading ...
Loading ...
Loading ...
34 EN MENUS FORDETAILEDAD3USTMENT
® DISPLAY
• The following menu settings can be changed only
when the Power Switch is set to "REC".
• The DISPLAY settings except "BRIGHT" and
"LANGUAGE" are effective only for shooting.
[ ] = Factory-preset
I:]il[_-'id
- pg. 17, "Brightness Adjustment Of The
Display"
:" pg. 16, "Date/Time Settings"
R$_ / _-o_ / _ / [ENGLISH] / FRAN?AIS /
ESPANOL / PORTUGUES
The language setting can be changed.
( pg. 16)
IDT.,_ll=rJdhN=
[OFF]:The date/time does not appear.
ON: The date/time is always displayed.
• The date indication can also be turned on/off by
pressing the DISPLAY Button on the remote
control.( pg.23, 42)
OFF: Automatic demonstration will not take
place.
[ON]: Demonstrates certain functions such as
Wipe/Fader and Effects, etc., and can be used
to confirm how these functions operate.
Demonstration starts in the following cases:
• When the Menu Screen is closed after DEM©
MODE" is turned "ON".
• With "DEMO MODE" set to "ON" if there is no
operation for about 3 minutes after the Power
Switch is set to REC".
• Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for more
than 3 minutes after that, the demonstration will
resume.
NOTES:
• If a cassette is in the camcorder the
demonstration cannot be turned on.
• DEMO MODE" remains ON" even if the
camcorder power is turned off.
DSC
[ ] = Factory-preset
!]i#:l ! / i'ii
<"elI If,,"I_il ;I;I1
LeD: Keeps the camcorder's display (except the
date, time and time code) from appearing on the
connected TV screen.
[LOD/'rv]: Makes the camcorder's display
appear on screen when the camcorder is
connected to a TV.
IIILN=l[_o]l] =
[OFF]:Time code is not displayed.
ON:Time code is displayed on the camcorder
and on the connected TV. Frame numbers are
not displayed during recording. (:- pg. 20)
[FINE] / STANDARD
The Picture Quality mode can be selected to
best match your needs. Two Picture Quality
modes are available: FINE ([_;T_) and
STANDARD (_) (in order of quality).
NOTE:
The number of storable images depends on the
selected picture quality as well as the composition
of the subjects in the images and the type of
memory card being used. ( "pg. 26)
il_'_ .L"]=iIll=[_d
[ r_ (TAPE)]: When Snapshot recording is
performed with the VIDEO/MEMORY Switch set
to "VIDEO", still images are recorded only onto
the tape.
r'_/_. I_ (TAPE/CARD): When Snapshot
recording is performed with the VIDEO/
MEMORY Switch set to "VIDEO", still images
are recorded not only onto the tape but also in
the memory card (640 x480 pixels).
Loading ...
Loading ...
Loading ...