Loading ...
Loading ...
Loading ...
46 ENTROUBLESHOOTING
If, after following the steps in the chart below, the
problem still exists, please consult your nearest
JVC dealer.
The camcorder is a microcomputer-controlled
device. External noise and interference (from
TV, a radio, etc.) might prevent it from
functioning properly. In such cases, first
disconnect its power supply unit (battery pack
AC Adapter, etc.) and wait a few minutes; and
then re-connect it and proceed as usual from
the beginning.
Power
• Effects and DIS" functions that cannot be used
together are selected at the same time.
_Re-read the sections covering Effects and DIS".
( pg.31,32, 41)
• 32X optical zoom is selected.
_Set "ZOOM" to"64X" or 800X'. ( pg. 33)
• The VIDEO/MEMORY Switch is set to
MEMORY".
_Set the VIDEO/MEMORY Switch to "VIDEO".
VideoandD.S.C.Playback
_L.i_IT,.[.],,,,,[_]d?--l--]_pj.'1IF'_It
d11_.I_-.4 iil.:l_Jlili l/o'111111/ ._ 111"1_-
• The power is not connected properly.
-l, Connect the AC Adapter securely. C Pg. 14)
• The battery pack is not attached firmly.
-l, Detach the battery pack once again and re-attach
it firmly.( pg. 14)
• The battery is dead.
_Replace the dead battery with a fully charged
one. (pg. 14)
VideoandD.S.C.Recording
• The tape's erase protection tab is set to "SAVE".
_Set the tape's erase protection tab to REC".
( pg. 18)
• "TAPE END" appears.
Replace with new cassette. ( pg. 18)
• The cassette holder cover is open.
_Close the cassette holder cover.
I,'F'JIi__ . , ,,. . IF'.i
• This is not a malfunction.
•:i;]_'_h"_ .'_ F'_ I._ P
• This is not a malfunction.
• "DATE/TIME" is set to "OFF".
"->Set DATE/TIME" to "ON". ( pg. 31,34)
• Your TV has AV input terminals, but is not set to
its VIDEO mode.
_Set the TV to the mode or channel appropriate for
video playback. ( pg. 23)
• The cassette holder cover is open.
_Close the cassette holder cover. ( pg. 18)
_Clean the video heads with an optional cleaning
cassette.( pg. 52)
Advancedfeatures
• Focus is set to the Manual mode.
_Set Focus to the Auto mode. (: pg. 37)
• The lens is dirty or covered with condensation.
-l, Clean the lens and check the focus again.
( pg. 50)
• The Wide (16:9) mode (16:9 indicator) is
selected.
-!, Disengage the 16:9 (16:9 indicator) Wide mode.
( pg. 36)
Loading ...
Loading ...
Loading ...