Loading ...
Loading ...
Loading ...
I ubbingToOr FromAVideoUnit
EquippedWithA DV Connector
(Digital Dubbing)
It is also possible to copy recorded scenes from
the camcorder onto another video unit equipped
with a DV connector. Since a digital signal is
sent, there is little, if any, image or sound
deterioration.
To DV IN/OUT
Core filter DV cable (optional)
To DV IN/OUT
1
Video unit equipped with DV connector
To use this camcorder as a player
1 Make sure all units are turned off.
2 Connect this camcorder to a video unit
equipped with a DV input connector using a DV
cable as shown in the illustration.
3 Start playback on the camcorder. (: pg. 21)
4 At the point you want to start dubbing, start
recording on the video unit. (Refer to the video
unit's instruction manual.)
5 To stop dubbing, stop recording on the video
unit, then stop playback on this camcorder.
EDITINGEN43
NOTES:
• It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
(pg. 14)
• If a blank portion or disturbed image is played
back on the player during dubbing, the dubbing
may stop so that an unusual image is not dubbed.
• Even though the DV cable is connected correctly,
sometimes the image may not appear in step 4. If
this occurs, turn off the power and make
connections again.
• If Playback Zoom" ( "pg. 25) or "Playback
Special Effects" ( pg. 25) is attempted or
SNAPSHOT is pressed during playback, only the
original playback image recorded on the tape is
output from the DV IN/OUT connector.
• When using a DV cable, be sure to use the
optional JVC VC-VDV204U or VC-VDV206U DV
cable.
To use this camcorder as a recorder
1 Make sure all units are turned off.
2 Connect this camcorder to a video unit
equipped with a DV output connector using a DV
cable as shown in the illustration.
3 Set the camcorder's Power Switch to "PLAY".
4 Set "REC MODE" to "SP" or "LP", ( "pg. 35)
Start playback on the player,
6 Press the Recording Start/Stop Button to
engage the Record-Pause mode.
l
The" DV iN "indication appears on the
screen.
7 At the point you want to start dubbing, press ,._
z
the Recording Start/Stop Button to start
dubbing.The _ indication rotates.
8 Press the Recording Start/Stop Button again '_
to stop dubbing.The _ indication stops
rotating.
9 Press • to return to the normal playback
mode.
NOTE:
Digital Dubbing is performed in the sound mode
recorded on the original tape, regardless of the
current "SOUND MODE" setting. ( pg. 32)
Loading ...
Loading ...
Loading ...