Loading ...
Loading ...
Loading ...
143
Decommissioning, disassembly and disposal
www.bora.com
EN
11 Decommissioning, disassembly and disposal
11.3 Environmentally-friendly
disposal
Disposal of transport packaging
i
The packaging protects the device from
damage in transport. The packaging materials
have been selected from environmental and
disposal perspectives and are therefore
recyclable.
Returning the packaging to the materials cycle
saves resources and reduces waste volumes. Your
specialist supplier will take the packaging back.
X Give the packaging to your specialist supplier
or
X Dispose of the packaging properly in line with
local regulations.
Disposal of old appliance
Electrical devices marked with
this label may not be disposed of
in domestic waste at the end of
their service life. They must be
disposed of at a collection point
for the recycling of old electrical
or electronic devices. You can
find information from your city or
district council.
Many electrical and electronic devices still contain
valuable materials. But they also contain damaging
materials which were necessary for them to function
properly and safely. These can damage human
health or the environment if disposed of improperly
or incorrectly handled.
X Never put your old appliance in domestic waste.
X Take the old appliance to a regional collection
point for return and recycling electrical and
electronic components and other materials.
X Observe all safety and warning information
(see „2 Safety“).
X Follow the enclosed manufacturer’s information.
11.1 Decommissioning
Decommissioning is understood as final shutdown
and disassembly. Following decommissioning, the
device can either be installed into other units, sold
on privately or disposed of.
i
Electricity and gas connections may only be
disconnected by qualified specialists.
X To decommission, switch the device off
(see „6 Functions and operation“).
X Disconnect the device from the power supply.
11.2 Disassembly
For removal, the device must be accessible for
disassembly and disconnected from the power
supply.
X Remove the silicone joints.
X Remove the device from the worktop by lifting it
upwards.
X Remove any other accessories.
X Dispose of the old device and any contaminated
accessories as described under “ Environmentally-
friendly disposal”.
Loading ...
Loading ...
Loading ...