Loading ...
Loading ...
Loading ...
EN
118
Cleaning and maintenance
www.bora.com
8 Cleaning and maintenance
For the air inlet nozzle and grease filter
X Do not use any aggressive cleaning agents or
agents containing acid or lye.
8.2 Cooktop and extractor
care
X Never use the cooktop as a work or storage
surface.
X Do not push or pull cookware over the cooktop.
X Always lift pots and pans.
X Keep the cooktop and extractor clean.
X Remove any dirt immediately.
X Only use cookware suitable for glass ceramic
cooktops (see „5 Appliance description“).
8.3 Cleaning the cooktop
i
When the cooktop extractor is in use the air
inlet nozzle must be fitted so that no small or
light objects such as fabric or paper cleaning
cloths can be sucked in.
X Make sure that the cooktop is switched off (see
„6 Functions and operation“).
X Wait until all cooking zones are cold.
X Remove all coarse dirt and food residues from the
cooktop using a glass ceramic scraper.
X Apply the cleaning agent to the cold cooktop.
X Spread the cleaning agent using kitchen roll or a
clean cloth.
X Wipe the cooktop clean with a damp cloth.
X Dry the cooktop with a clean cloth.
If the cooktop is hot:
X Remove stubborn residues of plastic, aluminium
foil, sugar or sweet dishes from the hot cooking
zone immediately using a glass ceramic scraper
to prevent burning.
X Observe all safety and warning information
(see „2 Safety“).
X When conducting scheduled cleaning and
maintenance, ensure that the cooktop and cooktop
extractor are fully switched off and cooled so as to
prevent injury (see „6 Functions and operation“).
O
Regular cleaning and maintenance ensures long
service life of the product and optimal function.
X Adhere to the following cleaning and maintenance
cycles:
Component Cleaning cycle
Operating panel Immediately after every soiling
Cooktop
Clean with conventional glass
ceramic detergents immediately after
soiling and on a weekly basis
Cooktop extractor weekly
Air inlet nozzle
and stainless steel
filter
after cooking very greasy dishes;
at least once a week, when the
fan power level indicator shows
F
by hand or in the dishwasher (at
65°C max.); clean stainless steel
surfaces in the polishing direction
only!
Air guiding
housing
Every 6 months or when replacing
the activated charcoal filter
Activated charcoal
filter (with
recirculation only)
replace if odours have built up,
extraction power is dwindling
or the fan power level indicator
shows
F
Tab. 8.1 Cleaning cycles
8.1 Cleaning agents
i
Due to the use of aggressive cleaning agents
and abrasion caused by the pot bases the
surface will become damaged and dark stains
will occur.
To clean the cooktop, you need a special glass
ceramic scraper and suitable cleaning agents.
X Never use steam cleaners, abrasive sponges,
scouring pads or chemically aggressive cleaning
agents (e.g. oven cleaner spray).
X Make sure that the cleaning agent does not
contain any sand, soda, acids, lyes or chloride.
Loading ...
Loading ...
Loading ...