Loading ...
Loading ...
Loading ...
EN
136
Installation
www.bora.com
Height adjustment plates for flush installation
(optional)
1
2
Fig. 10.28 Height adjustment plates
[1] Cooktop
[2] Height adjustment plate
1 2
Fig. 10.29 Height adjustment plates
[1] Sealing tape
[2] Optional height adjustment plates
O
The height adjustment plates are self-adhesive to
prevent slipping during installation.
X If applicable, insert the height adjustment plates [2].
X Place the height adjustment plates next to the
sealing tape [2].
10.7.9 Making a connection with the
back panel (only in installation
variant A)
1
3
2
Fig. 10.30 Connection with the back panel
[1] Telescopic pull-out
[2] Adhesive tape
[3] Back panel of unit
X Before inserting the cooktop, remove the air inlet
nozzle [3] and the stainless steel grease filter [4].
X Remove the protective film from the adhesive
tape [6] on the front of the telescopic pull-out.
X Use the inlet opening [2] as a handle during
insertion.
X Keep the cooktop [1] straight as you lift it into the
worktop cut-out [5]
X Insert the cooktop [1] into the centre of the
worktop cut-out [5].
X Precisely align the cooktop.
1
2
3
Fig. 10.27 Securing the cooktop
[1] Cooktop
[2] Holding clamp
[3] Worktop
X When aligning the cooktop, ensure that the
holding clamps hold the cooktop in the worktop.
Information regarding surface mounting:
X make sure that the cooktop sealing tape is flat
against the worktop.
Information regarding flush installation:
X make sure that the cooktop sealing tape is well
sealed all the way round.
Loading ...
Loading ...
Loading ...