Loading ...
Loading ...
Loading ...
139
Installation
www.bora.com
EN
Connection Fuse
protection
Minimum
cross-section
Three-phase connection 3 x 16 A 2.5 mm
2
Two-phase connection 2 x 16 A 2.5 mm
2
One-phase connection 1 x 32 A 4 mm
2
Tab. 10.2 Fuse protection and minimum
cross-section
4
N2
5
N1L1
220 - 240 V~
L2
2 3
L3
1
220 - 240 V~
220 - 240 V~
PE
Fig. 10.38 Connection diagram – three-phase
connection
4
N2
5
N1L1
220 - 240 V~
L2
2 3
L3
1
220 - 240 V~
PE
Fig. 10.39 Connection diagram – two-phase
connection
4
N2
5
N1L1L2
2 3
L3
1
220 - 240 V~
PE
Fig. 10.40 Connection diagram – one-phase
connection
2
1
Fig. 10.41 Electrical connections of the cooktop
[1] Power supply cover
[2] Mounting eyes
X Connect the power supply cable to the power
supply of the appliance in accordance with the
relevant connection diagram.
X For a one-phase or two-phase connection,
connect the relevant contacts using the bridge
provided (in scope of delivery).
X Secure the connection cable with the strain relief
clamp (in scope of delivery).
X Close the power supply housing with the power
supply cover [1] (in sco
p
e of delivery).
X Lay the connection cable along the mounting
eyes [2] with the help of the cable ties (in scope
of delivery).
X Ensure that the cable is not trapped or damaged
and is not able to come into contact with any hot
areas on the cooktop.
X Attach the bottom of the suction chamber with
the 5 suction chamber locks.
X Check that installation has been carried out
correctly.
Loading ...
Loading ...
Loading ...