Loading ...
Loading ...
Loading ...
2.4 Charge the Batteries
For MiWand 2/MiWand 2 PRO:
*The scanner comes with a battery charger and 2 pieces of AA rechargeable batteries to let
you reuse batteries. Please follow these steps to recharge the rechargeable batteries:
1. Insert 2 rechargeable batteries into the battery charger. Make sure the batteries are
inserted with the correct polarity. (note correct + - direction)
2. Plug the battery charger into an electrical outlet. A green LED light appears on the
charger while the batteries are charged. Note every time the batteries must be charged
for 7 hours.
3. When charging is complete, unplug charger and remove batteries to prevent
overcharging and cause damage to the batteries.
Note:
1. The LED light on the charger does not turn off when charging is complete. It turns
off only when the safety time (18 hours) expires.
2. The scanner does not recharge the rechargeable batteries.
3. The scanner can only run on 2x AA alkaline batteries or 2 NiMH rechargeable
batteries.
* AA battery charger: Available for full version only!
2-4
Loading ...
Loading ...
Loading ...