Loading ...
Loading ...
Loading ...
How to Set the Oven for Cleaning
Quick Reminder:
1. Latch the door°
2, Turn the Oven Set knob to CLEAN
If the oven is too hot and you start to set a clean cycle,
you will not be able to slide the latch.
Allow additional time for cooling before you try to set
the cycle
1. Follow directions to prepare the oven for cleaning,
2. Slide the latch handle to the right as far as it will go,
Never force the latch
handle. Forcing the handle
will damage the door lock
mechanism.
3. Turn the Oven Set knob
to CLEAN, The CLEAN,
AUTOMATIC OVEN, OVEN ON and COOK TIME
ON/OFF lights will glow,
NOTE: If you turn the Oven Set knob before you slide
the latch, the CLEAN light will flash_ Slide the latch to
the right,
Clean cycle time is normally 4 hours and 20 minutes,
On some models you can change the Clean Time to
anywhere between 3 hours and 5 hours and 59 minutes,
depending on how dirty your oven is.
You have one minute to change your Clean Time. Use
the HOUR and MIN. pads to change the total Clean Time,
Both the OVEN ON light and the CLEAN light will flash
when the Clean Time is finished°
After using the clean cycle, the door latch and the
Oven Set knob must be returned to their original
positions before you can use the oven.
When the CLEAN light flashes, stide the latch
handle to the left as far as it will go, turn the
Oven Set knob to OFF and open the door,
Never force the latch handle. Wait until the
CLEAN light flashes and the latch slides easily..
Forcing the latch handle may damage the door lock,
To Stop A Clean Cycle
1. Turn the Oven Set knob to OFF.
2. Wait until the oven has cooled below the locking
temperature to unlatch the door,. You wil! not be abie
to open the door right away unless the oven has
cooled below the locking temperature.,
After a Clean Cycle
You may notice some white ash in the oven. Just wipe
it up with a damp cloth after the oven cools°
If white spots remain, remove them with a soap4illed
pad, Be sure to rinse thoroughly with a vinegar and water
mixture° These deposits are usually a salt residue that
cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle,
repeat the cycle
NOTE:
° You cannot set the oven for cooking until the oven is
cool enough for the door to be unlatched.
- While the oven is self-cleaning, you can press the
CLOCK pad to display the time of day.rTo return
to the clean count down, press the COOK TIME
ON/OFF pad.
• if your oven is equipped with gray porcelain-coated
oven shelves, wipe the shelf edges or oven shelf
supports with vegetable oil
(continued next page)
27
Loading ...
Loading ...
Loading ...