Loading ...
Loading ...
Loading ...
21212121212121
U
S
E
R
GB
CLEANING AND MAINTENANCE
CLEANING THE APPLIANCE
Before any type of cleaning, disconnect the appliance from the mains and shut off the appliance’s gas
tap. Cleaning the worktop: only clean the hob once cold. The burner cups, the enamelled grids, the
enamelled covers and the ame distributors must be cleaned periodically using tepid soapy water,
rinsed and well dried. Any spilt liquid from the pans must always be removed with a rag. Cleaning the
enamelled parts: it is necessary to clean the enamelled parts frequently with soapy water to main-
tain their characteristics. Never use abrasive powders or metal pads. Avoid leaving acidic or alkaline
substances on the enamelled parts (vinegar, lemon juice, salt, tomato juice etc..) and washing when
the enamelled parts are still hot.
Cleaning of the stainless steel parts:
Clean the parts with tepid water and non-corrosive liquid detergent and then dry them with a soft
cloth or in microbre. The brilliance is maintained through periodic cleaning with commercially avai-
lable special products. Never use abrasive powders.
Food stains or residues.
Food stains or residues.
Absolutely avoid using steel sponges and sharp scrapers to not damage the surfaces. Use normal
products, non-abrasive, possibly with the help of wooden or plastic utensils. Rinse carefully and dry
with a soft rag or with a cloth in microbre. Avoid letting dry inside the appliance sugar based food
remains (for example jam) because they might ruin the appliance’s ename
Cooking hob grills
Extract the grills and clean them in tepid water and non- abrasive detergent. Remove all encrusta-
tions with care. Dry the grills and reposition them on the cooking hob.
The continuous contact of the grills with a ame may cause an alteration of the enamel
over time near the areas exposed to heat. This is completely natural and does not com-
promise this component’s.
Igniters and thermocouples
To function properly, the igniters and thermocouples must always be clean. Check them frequently
and if necessary clean them with a damp rag. Any dried remains must be removed with a toothpick
or a needle.
Flame distributor rings and covers
The ame distributor rings and the covers are extractable to facilitate their cleaning. Wash them in
hot water and non- abrasive detergent. Carefully remove every encrustation and wait until they are
perfectly dry.
In case of malfunction, ensure that the holes of the external ring are always perfectly cle-
an.
ATTENTION: It is not recommended to use the dishwasher to clean grills, ame-spreader
and covers.
Annual service by an aut horised person is r ecommended, or if any of t he f ollowing
condit ions are not iced; incomplet e ignit ion, appreciable yellow t ipping, carbon
deposition, lifting, floating, lighting back or objectionable odour. Contact
1300 MYILVE (694 583) www.ilve.com.au
Del et e
Loading ...
Loading ...
Loading ...