Loading ...
Loading ...
Loading ...
6
W415-0748 / 12.12.08
1.4 GENERAL INSTRUCTIONS
Always light the pilot whether for the first time or if the gas supply has ran out, with the glass door
opened or removed.
Provide adequate accessibility clearance for servicing and operating the fireplace.
Provide adequate ventilation.
Never obstruct the front opening of the fireplace.
Objects placed in front of the fireplace must be kept a minimum of 48” from the front face of the unit.
This product must be installed by a licensed plumber or gas fitter when installed within the commonwealth
of Massachusetts.
Fire risk. Explosion Hazard.
High Pressure will damage valve. Disconnect gas supply piping before pressure testing gas line at test pressures
above 1/2 psig. Close the manual shut-off valve before pressure testing gas line at test pressures equal to or
less than 1/2 psig.
Use only Wolf Steel approved optional accessories and replacement parts with this appliance. Using non-listed
accessories (blowers, doors, louvres, trims, gas components, venting components, etc.) could result in a safety
hazard and will void the warranty and certification.
!
WARNING
THIS GAS FIREPLACE SHOULD BE INSTALLED AND SERVICED BY A QUALIFIED INSTALLER to conform with local
codes. Installation practices vary from region to region and it is important to know the specifics that apply to your area, for
example in Massachusetts State:
• The fireplace damper must be removed or welded in the open position prior to installation of a fireplace insert or gas log.
• The appliance off valve must be a “T” handle gas cock.
• The flexible connector must not be longer than 36 inches.
• A Carbon Monoxide detector is required in all rooms containing gas fired appliances.
• The appliance is not approved for installation in a bedroom or bathroom unless the unit is a direct vent sealed
combustion product.
The installation must conform with local codes or, in absence of
local codes, the National Gas and Propane Installation Code
CSA B149.1 in Canada, or the National Fuel Gas Code,
ANSI Z223.1 / NFPA 54 in the United States. Suitable for mobile
home installation if installed in accordance with the current
standard CAN/CSA Z240MH Series, for gas equipped mobile
homes, in Canada or ANSI Z223.1 and NFPA 54 in the United
States.
When the fireplace is installed directly on carpeting, vinyl tile or other combustible material other than wood flooring, the
fireplace shall be installed on a metal or wood panel extending the full width and depth.
We suggest that our gas
heart products be installed
and serviced by professionals
who are certied in the U.S.
by the National Fireplace
Institute
®
(NFI) as NFI Gas
Specialists
www.ncertied.org
4.1
The optional heat circulating blower is supplied with a cord.
The junction box must be electrically connected and grounded in accordance with local codes. In the absence
of local codes, use the current CSA C22.1 Canadian Electrical Code in Canada or the ANSI/NFPA 70 National
Electrical Code in the United States.
Loading ...
Loading ...
Loading ...