Loading ...
Loading ...
Loading ...
41
W415-0748 / 12.12.08
8.12 IN THE EVENT OF A POWER FAILURE
If the receiver is equipped with batteries they will enable flame height control, ON/OFF or thermostat function
to control the fireplace during a power failure. Refer to “FIREPLACE OPERATION” section when communica-
tions between receiver and transmitter have been lost. The will receiver emit a “beep” sound to confirm
programming has been successful once power is restored. During a power failure, if the fireplace was on, the
flame height will stay at the setting prior to the failure. If off when the failure occurs and then turned on, the
flame height will come on at “HI”. The flame height can then be controlled by the remote.
35.14
8.13 FAN CONTROL MODULE
Control module offers the added ability to control the fan
speed through six (6) speeds, a remotely actuated 120V
A
UX outlet for the NIGHT LIGHT™ and a constantly
powered 120V outlet.
NOTE: Control module ON/OFF switch should
always be in the “ON” position. If for any reason the
module is turned “OFF”, the components plugged
into the module won’t have power.
CONSTANTLY POWERED
120V OUTLET
FAN OUTLET
120V AUX OUTLET
MAINS VOLTAGE
SUPPLY CORD
MODULE ON/OFF
SWITCH (SHOWN IN
THE ON POSITION)
COMMUNICATION
BUS (3 PIN)
35.15
FIGURE 8.13
Loading ...
Loading ...
Loading ...