Loading ...
Loading ...
Loading ...
13
XBR25 STEP FOUR
HARDWARE FOR STEP 4
PART TYPE DESCRIPTION QTY
105 SHEET METAL SCREW
4 X 16MM
4
1. Gather HARDWARE FOR STEP 4.
2. Attach the PEDALS (L, R)(116,117) to
the Crank Arms (51L, 51R). Tighten with
the Wrench (132). Remember that the
LEFT PEDAL has a reverse thread and
will be threaded onto the Crank arm in a
COUNTERCLOCKWISE MOTION. There
is an “L” stamped in the end of the threaded
post of the left pedal and an “R” in the right.
Make sure to tighten the pedals as rmly as
you can. It may be necessary to re-tighten the
pedals if you feel a thumping while pedaling
the bike. A thumping or clicking noise is usually
caused by loose pedals.
3. Attach the DRINK BOTTLE HOLDERS
(L39 & R38) to the sides of the SEAT
HANDLE BAR (6) with 4 SHEET METAL
SCREWS (105). Tighten with the PHILLIPS
HEAD SCREW DRIVER (114).
Loading ...
Loading ...
Loading ...