Loading ...
Loading ...
Loading ...
10
XBR25 STEP TWO
HARDWARE FOR STEP 2
PART TYPE DESCRIPTION QTY
68 BOLT
5/16”XUNC18X5/8”
8
76 FLAT WASHER
Ø5/16” × Ø18 × 1.5T
6
82 SPLIT WASHER
5/16”X1.5T
2
83 CURVED WASHER
Ø5/16” × 19 × 1.5T
2
99 PHILLIPS HEAD SCREW
M5 × 12mm
4
1. Gather HARDWARE FOR STEP 2.
2. Slide the COMPUTER CABLE (44) through
the bottom of the CONSOLE MAST
COVER (31) and then the bottom of the
CONSOLE MAST (2). Make sure the
Console Mast Cover is correctly oriented (see
illustration).
3. Install the CONSOLE MAST (2) into the
receiving tube (MAKE SURE NOT TO
PINCH CABLE (44); DAMAGE TO THE
ELECTRONICS COULD OCCUR) OF
THE MAIN FRAME (1). Insert 2 BOLTS
(68) and 2 FLAT WASHERS (76) on each
side. Insert 2 BOLTS (68) and 2 CURVED
WASHERS (83) on the front. Tighten all 6
bolts rmly with the WRENCH (112).
Continued on next page...
Loading ...
Loading ...
Loading ...