Loading ...
Loading ...
Loading ...
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii'_!,!,!,!,!,!,!,i
iiiiiiiiiiiiiiii_iiiiiii_i
Problem Explanation/Solution
(?)icon appears on
the screen.
You cannot use the operation or function due to one of the following reasons:
(1) Your DVD disc does not support the feature (for example, angles)
(2) You've requested a title, chapter, or scan time that is out of the correct range.
Play mode settings are
different from the set-
tings configured with
the Setting menu.
The disc does not support all the selected functions.
In this case, some settings you configure on the Setting menu may not work properly.
Cannot change the
aspect ratio.
Aspect ratio is fixed for DVD disc.
No audio output.
Check whether you selected correct digital output options in the Audio Output Options menu.
No video or audio output. Did you move your DVD Recorder & VCR suddenly from a cold place to a warm place?
The disc tray is ejected In this case, do not connect the plug to the power outlet and wait for two hours. Then insert
after 2 to 5 seconds, the disc and try to play back again. It will work properly when condensation has evaporated.
Angle operationdoes not Angle operation is available only when the disc contains images captured at different
work duringplayback of a angles.
DVDdisc.
The disc revolves, but
no image or bad quali-
ty images are output.
,, Check whether there is damage or foreign materials on your disc.
,, Some discs with bad manufacturing quality may not be played back.
,, If the scene changes from dark to bright suddenly, the screen may jitter temporarily,
but it is not a defect.
Desired sound
language and
subtitle language are
not played.
No progressive
output.
Sound languages and subtitle languages are disc-specific.
Only the sound and subtitle languages contained on a DVD disc are available and displayed
on the disc menu.
,, Check whether PSO is displayed on front panel.
,, Make sure to change the component video output using the Progressive button when the
disc is stopped.
The remote control
doesn't work.
,, Point the remote control at the remote control sensor on your DVD Recorder & VCR.
Operate within distance. (15ft)
Remove obstacles between your DVD Recorder & VCR and remote control.
• Check whether the batteries are depleted.
Other problems
,, Read the table of contents and then find and read the sections describing your problem,
and follow the directions given.
,, Turn the unit off and on.
,, If your problem still persists, contact your nearest Samsung service center.
92- English
Loading ...
Loading ...
Loading ...