Samsung DVDVR330 dvd/vcr User Manual

instruction Manual

'_i'i!iiiii_

_ii,liiiii_

_ _ _ Hi-Fi

WWW, SalTISIII'Ig.COm

AK68-00995A-01

iiiiiiiiiiiiiiiLii!!ii/!iii!!i!i !i i

iiiiiiiiiiiiiiii_!)EIII

iiii ,,,, _, ¸ L

iiiii_iiiiiiiiiiii!_iliii_iii!

iiiiiiiiiiiii!,i_,!_!,_,__

iiiiiiiiiiiiiiiiiiiiiiiiiii_;!i_i!_¸]

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_ii_i_i_i_iiii

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE THE COVER(OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbolindicates"dangerousvoltage"

inside the productthat presents a riskof

electricshock or personal injury.

This symbolindicatesimportantinstructions

accompanyingthe product.

Do not install this equipment in a confined space such

as a bookcase or similar unit.

WARNING : To prevent damage which may result in fire or

electric shock hazard, do not expose this appli-

ance to rain or moisture.

CAUTION : This DVD Recorder & VCR USES AN INVISI-

BLE LASER BEAM WHICH CAN CAUSE

HAZARDOUS RADIATION EXPOSURE IF

DIRECTED.

BE SURE TO OPERATE RECORDER COR-

RECTLY AS INSTRUCTED.

CAUTION

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER THAN

THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR

YOURSELR REFER SERVICING TO QUALIFIED

PERSONNEL.

CAUTIONS

Caution: To prevent electric shock, match wide blade of

plug to wide slot, fully insert.

Attention: Pour eviter les chocs electriques, introddre la

lame la plus large de la fiche dans la borne

eorrespondante de la prise et pousser jusqu au

fond.

This product satisfies ECC regulations when shielded

cables and connectors are used to connect the unit to

other equipment. To prevent electromagnetic interference

with electric appliances, such as radios and televisions, use

shielded cables and connectors for connections.

FCC NOTE (for U.S.A):

Thisequipment has been tested and foundto comply

with the limitsfor a Class B digitaldevice, pursuant to

2 - English

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment gener-

ates, uses and can radiate radio frequency energy and,

if not installed and used in accordance with the instruc-

tions, may cause harmful interference to radio communi-

cations. However, there is no guarantee that interfer-

ence will not occur in a particular installation. If this

equipment does cause harmful interference to radio or

television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the follow-

ing measures:

* Reorient or relocate the receiving antenna.

* Increase the separation between the equipment and

receiver.

, Connect the equipment into an outlet on a circuit differ-

ent from that to which the receiver is connected.

, Consult the dealer or an experienced radiofrV techni-

cian for help.

Caution: FCC regulations state that any unauthorized

changes or modifications to this equipment

may void the user's authority to operate it.

R This unit can be used only where the power

supply is AC 120V, 60Hz. It cannot be used else-

where.

E This DVD Recorder & VCR is designed and

manufactured to respond to the Region

Management Information.

If the Region number of a DVD disc does not corre-

spond to the Region number of this, the DVD

Recorder & VCR cannot play the disc.

E This device is protected by U.S. Patent

Nos.4,631,603;4,677,216;4,819,098;4,907,093; and

6,616,132. This product incorporates copyright pro-

tection technology that is protected by U.S. patents

and other intellectual property rights. Use of this

authorized by Macrovision,and is intended for home

and other limited viewing uses only unless otherwise

authorized by Macrovision. Reverse

engineering or disassembly is prohibited.

E This product is covered by one or more of the

following U.S. patents:

6,034,830 6,060,200 6,467,669 6,561,649

6,691,858 6,706,762 6,987,417 6,043,912

6,222,983 6,272,096 6,377,624 6,377,631

6,386,687 6,389,669 6,389,670 6,408,408

6,466,532 6,473,736 6,477,601 6,480,829

6,566,520 6,656,621 6,556,622 6,694,208

6,674,697 6,674,957 6,721,493 6,728,474

6,741,536 09/610381 09/610696

DANGER - VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN,

AVOID DIRECT EXPOSURE TO BEAM.

CAUTION - VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.

AVOID EXPOSURE TO BEAM,

ATTENTION - RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS D'OUVERTURE

EXPOSITION DANGEREUSE AU FAISCEAU

ADVARSEL - SYNLIG OG USYNLIG LASERSTR*_LING VED ABNING,

UNDGA LIDSPc I ] ELSE FOR STRALING.

VARO ! - AVATTAESS A OLET ALTTIINA N_,KYV_,A JA N_KYM_TON

LASERS,_,TEILYLLE, ,_L_, KATSO SATEESEEN,

VARNING - SYNLIG OCH QSYNLIG LASERSTRALNING NAR DENNA DEL

AR OPPNAD. BE I RAKTA EJ SY R_LEN.

ADVARSEL - SYNLIG OG USYNLIG LASERSTR,_LING N_,R DEKSEL,&,PNES,

UNNGA EKSPONERING FOR STRALEN,

VORSICH / - £ICHTI_AR UNO UNSICH BARE LASERS RA LUNG WENN ABD CKUNG

GEOFFNET NICHT OEM STRAHL A_JSSETZEN

| important Safety instructions

Read these operating instructions carefully before using

the unit. Follow all the safety instructions listed below.

Keep these operating instructions handy for future refer-

ence.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings, Install in

accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radi-

ators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized

or grounding- type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are pro-

vided for your safety, if the provided plug does not

fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protect the power cord from being walked on or

pinched particularly at plugs, convenience recep-

tacles, and the point where they exit from the

apparatus.

11) Only use attachments/accessories specified by

the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or

when unused for long periods of time.

14) Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as power-sup-

ply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or mois-

ture, does not operate normally, or has been

dropped.

| Handling Cautions

• Before connecting other components to this

recorder, be sure to turn them all off.

Do not move the recorder while a disc is being

played, or the disc may be scratched or broken,

and the recorder's internal parts may be damaged.

Do not put a flower vase filled with water or any

small metal objects on the recorder.

Be careful not to put your hand into the disc tray.

Do not place anything other than the disc in the

disc tray.

o Exterior interference such as lightning and static elec-

tricity can affect normal operation of this recorder. If

this occurs, turn the DVD Recorder & VCR off and on

again with the POWER button, or disconnect and then

reconnect the AC power cord to the AC power outlet.

The recorder will operate normally.

_'Be sure to remove the disc and turn off the recorder after

use.

• Disconnect the AC power cord from the AC outlet

when you don't intend to use the recorder for long

periods of time.

• Clean the disc by wiping in a straight line from the

inside to the outside of the disc.

II Maintenance of Cabinet

For safety reasons, be sure to disconnect the AC power

cord from the AC outlet.

• Do not use benzene, thinner, or other solvents for

cleaning.

_'Wipe the cabinet with a soft cloth.

| Disc Handling

_'Use discs with regular shapes.

Ifanirregulardisc(adiscwith _ OXa special shape) is used, this

DVD Recorder & VCR may be

damaged.

Holding discs

_'Avoid touching the surface of a disc

where recording is performed.

DVD=RAM, DVD_+RW and DVD_+R

• Clean with an optional DVD-RAM/PD _,

disc cleaner.

Do not use cleaners or cloths for CDs

to clean DVD-RAM/DVD_+RW/DVD_+R

discs.

DVD=Video, CD

_'Wipe off dirt or contamination on the disc with a soft

cloth.

Cautions on handling discs

_'Do not write on the printed side with a ball-point pen

or pencil.

• Do not use record cleaning sprays or antistatic. Also,

do not use volatile chemicals, such as benzene or

thinner.

• Do not apply labels or stickers to discs. (Do not use

discs fixed with exposed tape adhesive or leftover

peeled-off stickers.)

English - 3

iii i i@ii!ii!ii!iiiii!i!i!

:::::::::::::::::::::::::::

.....iili__

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiii!!iiiii!iiiili!iii!i!!i!i !! !! !! !i i !

iiiiiiiiii!iiiii!iiii!_%iiii_iii!i

iiiiii!.!!_iiiii!i!i!i!i;!iii_i_ii!ii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i_i_i_i_i_ii_ii

• Do not use scratch-proof protectors or covers.

• Do not use discs printed with label printers available

on the market.

• Do not load warped or cracked discs.

| Disc Storage

Be careful not to harm the disc because the data on

these discs is highly vulnerable to the environment.

• Do not keep under direct sunlight.

• Keep in a cool ventilated area.

" Store vertically.

Keep in a clean protection jacket.

,, If you move your DVD Recorder & VCR suddenly from

a cold place to a warm place, condensation may gen-

erate on the operating parts and lens and cause

abnormal disc playback. In this case, do not connect

the plug to the power outlet and wait for two hours.

Then insert the disc and try to play back again. It will

work properly when condensation has evaporated.

| Disc Specifications

DVD-Video

"A digital versatile disc (DVD) can contain up to 135-

minutes of images, 8 audio languages and 32 subtitle

languages. It is equipped with MPEG-2 picture com-

pression and Dolby 3D surround, allowing you to

enjoy vivid and clear theater quality images in the

comfort of your own home.

,, When switching from the first layer to the second layer

of a double-layered DVD Video disc, there may be

momentary distortion in the image and sound.

This is not a malfunction of the unit.

,, Once a DVD_+R/DVD-RW(V) recorded is finalized, it is

playable in a standard DVD player.

Audio CD

"An audio disc on which 44.1kHz PCM Audio is recorded.

,, Plays CD-DA format audio CD-R and CD-RW discs. This

unit may not be able to play some CD-R or CD-RW discs

due to the condition of the recording.

CD-R/-RW

,, Only CD-R discs with MP3 files recorded with

ISO9660 or JOLIET format can be played back

,, Only MP3 files with the "rap3" or "MP3" extension can

be used.

,, For MP3 files recorded with a VBR(Variable Bit

Rates), from 80 Kbps to 320 Kbps, the sound may cut

in out.

,, Playable bitrate range is from 56Kbps to 320Kbps.

,, The unit can handle a maximum of 1000 files and fold-

ers.

,, DVD-RAM/_+RW/_+R discs that contain MP3 files can

be played back.

,, Only JPEG files with the ".jpg", ".JPG" extension can be

used.

,, The unit can handle a maximum of 1000 files and folders.

,, Maximum size of progressive JPEG is 3M pixels.

,, MOTION JPEG is not supported.

,, DVD-RAM/_+RW/_+Rdiscs that contain JPEG files can be

played back.

,, Use a 700MB(80 minutes) CD-R/-RW disc.

If possible, do not use a 800MB(90 minutes) or above

disc, as the disc may not play back.

,, If the CD-R/-RW disc was not recorded as a closed ses-

sion, you may experience a delay in the early play-back

time, and all recorded files may not play.

,, Some CD-R/-RW discs may not be playable with this unit,

depending on the device which was used to burn them.

For contents recorded on CD-R/-RW media from CDs for

your personal use, playability may vary depending on con-

tents and discs.

DVD+R Disc Playback and Recording

"Once a DVD_+R recorded is finalized, it is playable in a

standard DVD player.

,, You can record onto the available space on the disc and

perform editing functions such as giving titles to discs and

programs and erasing programs before finalizing.

,, When programming is erased from a DVD_+R,that space

does not become available. Once an area on a DVD_+Ris

recorded on, that area is no longer available for recording,

whether the recording is erased or not.

,, It takes about 30 seconds for the unit to complete record-

ing management information after recording finishes.

,, This product optimizes the DVD_+Rfor each recording.

Optimizing is carried out when you start recording after

inserting the disc or turning on the unit. Recording onto

the disc may become impossible if optimizing is carried

out too many times.

,, Playback may be impossible in some cases due to the

condition of recording.

"This unit can play back DVD_+Rdiscs recorded and final-

ized with a Samsung DVD video recorder. It may not be

able to play some DVD_+R discs depending on the disc

and the condition of the recording.

DVD-RW Disc Playback and Recording

" Recording and playback can be performed on DVD-

RW discs in both Video and VR Modes.

" Once a DVD-RW recorded in VR Mode or Video mode

is finalized, you cannot perform additional recording.

" Once a DVD-RW recorded in Video Mode is finalized,

it becomes DVD-Video.

4 - English

° In both modes, playback can be performed before and after

finalization, but additional recording, deleting and editing can

not be performed after finalization.

° If you want to record the disc in VR Mode and then record in

V Mode, be sure to execute format. Be careful when execut-

ing Format because all the recorded data may be lost.

° For an unused disc, a message that asks whether to initialize

a disc or not. If you select "Yes", disc will be formatted in VR

mode.

" DVD-RW (VR mode)

- This is a format that is used for recording data on

DVD-RW disc. You can record multiple titles, edit, delete,

partial delete, create a playlist, etc.

A disc that is recorded in this mode may not be played

by existing DVD players.

• DVD-RW (Video mode)

- This is a format that is used for recording data on a

DVD-RW or DVD-R disc. The disc can be played by an

existing DVD player once it has been finalized.

- If a disc that has been recorded in Video mode by a dif-

ferent manufacturer's recorder but has not been finalized

it cannot be played or additionally be recorded by this

recorder.

DVD+RW Disc Playback and Recording

• With DVD+RW discs, there is no difference between

DVD-Video format (Video mode) and DVD-Video

Recording format (VR mode).

,, You can make your own chapters on DVD+RWs and edit

them using the Chapter Edit menu.

,, Finalizing is generally unnecessary when using a

DVD+RW disc.

DVD-RAM Disc Playback and Recording

• For cartridge type DVD-RAM discs, remove the

cartridge and use the disc only.

" Ensure that the recording mode is set to VR mode.

Otherwise, this product will not be able to play the

recording.

• You cannot play a DVD-RAM in most DVD players due

to compatibility issues.

"Only DVD-RAM standard Version 2.0 discs can be

played in this unit.

" DVD-RAM recorded on this unit may not work with other

DVD Players. To determine compatibility with these DVD-

RAM discs, refer to the user's manual for the player.

Many DVD discs are encoded with copy protec-

tion. Because of this, you should only connect

your DVD Recorder & VCR directly to your TV,

not to a VCR. Connecting to a VCR results in a

distorted picture from copy-protected DVD discs.

This product incorporates copyright protection

technology that is protected by methods claims of

certain U.S. patents and other intellectual proper-

ty rights owned by Macrovisioe Corporation and

other rights owners. Use of this copyright protec-

tion technology must be authorized by

Macrovision Corporation, and is intended for

home and other limited viewing uses only unless

otherwise authorized by Macrovision Corporation.

Reverse engineering or disassembly is prohibited.

Protection

• Program-protection:See page 72 "Locking a Title"

" Disc-protectiomSee page 85 "Disc Protection"

÷ DVD-RAM/DVD_+RW/DVD_+Rdiscs that are incompati-

ble with the DVD-VIDEO format cannot be played with

this product.

÷ For more informationon DVD recordingcompatibility,

consultyour DVD-RAM/DVD_+RW/DVD_+Rmanufacturer.

÷ Use of poor qualityDVD-RAM/DVD_+RW/DVD_+Rdiscs

may causefollowingunexpectedproblemsincluding,

withoutlimitation,recordingfailure, lossof recordedor

edited materialsor damage to the recorder.

Do not use the following discs!

• LD, CD-G, CD-I, CD-ROM and DVD-ROM discs should

not be used in this product.

[Note]

" Some commercial discs and DVD discs purchased out-

side your region may not be playable with this product.

When these discs are played, either "No Disc" or "The

disc cannot be played. Please check the regional code

of the disc." will be displayed.

• If your DVD-RAM/DVD_+RW/DVD_+R disc is an illegal

copy or is net in DVD video format, it may also net be

playable.

• A 8X speed DVD+RW or above disc can be played, but

can not be recorded.

_'Not all brands of discs will be compatible with this unit.

• The latest firmware upgrade to improve recording &

playback quality can be downloaded from our web site.

(Download Center at www.samsung.com)

• If disc compatibility problems continue, or there is an

issue upgrading your recorder, contact the Call Center at

1-800-SAMSUNG.

iiiiiii_iiii_iiiiiiiiiiiiiiiiii

+++++++_i:_!!!!!!!!!!!!!!!i

iiii+++_iiiiiiiiiiiiiiiiii!!i

iiii+_!iiiii!iiiiiiiiiiiiiil

+++++++_iiiiiiii_i_i_i_iiiiiiiiiiiiiii!iil

+++++ii i!ilililililililililililililililili!

English - 5

GettiF_9Started

Warning ....................................... 2

Precaution ................................. 3

Important Safety Instructions ...................... 3

HandlingCautions .............................. 3

Maintenanceof Cabinet .......................... 3

Disc Handling .................................. 3

Disc Storage .................................. 4

Disc Specifications.............................. 4

General Features ........................... 8

Before Reading the User's Manual ............. 8

How to use the DVD Recorder & VCR ........... 9

Description ................................ 11

Front Panel ................................... 11

Front Panel Display ............................ 11

Rear Panel .................................. 12

Unpacking ................................... 12

Accessories .................................. 12

Tourof the Remote Control ...................... 13

¢o_r_ectin9 & Setting Up

Quick Overview ............................ 14

Step 1 : Connecting theAntenna Cable .......... 15

Antenna + DVD Recorder& VCR + TV :

No Cable box ................................. 15

Antenna + Cable box + DVD Recorder & VCR + TV :

Cable box with many scrambledchannels ........... 16

Antenna + DVD Recorder& VCR + Cable box + TV :

Cable box with a few scrambled channels ........... 17

Step 2 : Connecting the Video Cable ............ 18

Connectingto a Video inputjack .................. 18

Connectingto an S-video inputjack ................ 19

Connectingto Componentvideo inputjacks (Y,PB,P_). .20

Step 3 : Connecting the Audio Cable ........... 21

Connectingto your TV ........................ 21

Connectingto a stereoamplifier with

analog inputjacks ........................... 22

Connectingto an AV amplifierwith a

digital inputjack ............................ 23

Step 4 : Connecting External Devices .......... 24

Connectinga VCR, Set-TopBox(STB)or

DVD playerto the AV 1 IN or S-VIDEO IN jacks ..... 24

Connectinga Camcorder to the AV 2 IN jacks ...... 25

Connectinga Camcorder to the DV IN jack ........ 26

Step 5 : Connecting the Power Cord ........... 27

Step 6 : Preparing the Remote Control ......... 27

Setting the Remote Control ..................... 28

System Setup

On-ScreenMenu Navigation ................. 29

Auto Clock Set ........................... 30

ManualClock Set ......................... 31

Channel Set ............................. 32

Auto Channel Memory ...................... 32

ChannelAdd/Delete ....................... 33

RFOutputChannel ........................ 33

SettingUp the LanguageOptions ............. 34

SettingUp the Audio Options ................ 35

SettingUp the Display(Video)Options .......... 36

SettingUp the ParentalControl ............... 37

VCR Setting ............................. 38

Video Input .............................. 39

DVDEP Mode Time ....................... 40

AutomaticChapterCreator .................. 40

Quick Recording........................... 41

• DVD Playback

BeforePlaying ............................ 42

Playinga Disc ............................ 43

Usingthe Disc Menu andTitle Menu ........... 44

Usingthe Search& Skip Functions ............ 44

Slow MotionPlay/ Step Motion Play ........... 45

6 - English

AboutANYKEY ........................... 45

RepeatPlayback .......................... 46

Selectingthe Subtitle& AudioLanguage ........ 47

Changingthe Camera Angle ................. 48

Zooming-In .............................. 48

Usingthe Bookmarks ...................... 49

Usingthe Markers ......................... 50

Playingback anAudio CD (CD-DA) ............ 51

Playingback an MP3 Disc ................... 52

RepeatPlaybackof anAudio/MP3Disc ........ 53

PlayOption Mode ......................... 53

To ProgramTracks ......................... 54

Playinga Picture Disc ...................... 54

VCR Playback

Playingthe VCR ........................... 55

Tracking ................................. 55

SpecialVCR PlaybackFeatures .............. 56

S-VHS Playback .......................... 56

VariableSearch System ..................... 56

4, DVD Recording

Before Recording ......................... 58

Recordablediscs............................. 58

RecordingFormats........................... 59

RecordingMode ............................. 59

Unrecordablevideo........................... 59

Recordingthe CurrentChannelyou are watching..60

Recordingfrom External Devices.............. 61

Recordingthrough a DV Inputjack ............ 61

Makinga OneTouch Recording(OTR).......... 62

Makinga Timer Recording ................... 62

Editingthe ScheduledRecordList ............. 64

Deletingthe ScheduledRecord List ............ 64

VCR Recording

BasicVCR Recording ...................... 65

Check RemainingTime ..................... 66

Special RecordingFeatures ................. 66

Copy to DVD or VCR ....................... 67

Playing the Title List ........................ 69

Basic Editing (Title List) ..................... 71

Renaming(Labeling)a Title ..................... 71

Locking(Protecting)a Title ...................... 72

Deletinga Title .............................. 73

Deletinga Section of a Title .................... 73

Editinga Chapter ............................ 75

Dividinga Title ............................... 77

Advanced Editing (Playlist) ................... 78

Creatinga Playlist ............................ 78

PlayingTitles in the Playlist ..................... 79

Renaminga PlaylistTitle ....................... 79

Editinga Scene for the Playlist .................. 80

Copyinga PlaylistTitleto the VCR ............... 83

Deletinga PlaylistTitlefrom the Playlist ........... 84

Disc Manager ............................ 84

Editingthe Disc Name ...................... 84

Disc Protection .............................. 85

Formattinga Disc ............................ 86

Finalizinga disc .............................. 86

Unfinalizinga disc (VNR mode) ................. 87

DeleteAll Title Lists ........................... 88

Edit Compatible .............................. 89

Troubleshooting

(DVD-VIDEO/DVD-RAM/DVD+RW/DVD+R)..... 91

Troubleshooting(DVD) ...................... 92

Troubleshooting(VCR) ..................... 93

Problemsand Solutions(Displayerrormessage)..94

Specifications ............................ 96

iii i i@ii!ii!ii!iiiii!i!i!

.....iili__;;;;;;;;;;;;;;;;

iiiiiii_i%ii!i!

English - 7

iiiiiiiiiiiiiiiiiii!!iiiii!iiiili!iii!i!!i!i !! !! !! !i i !

iii'iii_iiiiiiiiii!iii!_%iiii_iiii!

iiiiiiii_iiiii!i!i!i!i;!iii_i_ii!ii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_ii_i_i_i_ii_ii

The DVD-VR330 allows you to record and play high quality

digital video on DVD-RAM/DVD_+RW/DVD_+R discs. You

can record and edit digital video on DVD-RAM/DVD_+RW/

DVD_+Rdiscs as if they were VCR tapes.

High quality digital audio and video recording and

playback

You can record up to approximately 16-hours of video on a

double side 9.4 GB DVD-RAM disc,up to 15-hours on a

dual-layer 8.bGB DVD_+Rdisc, and up to 8-hours on a 4.7

GB DVD-RAM/DVD_+RW/DVD_+R disc, depending on the

recording mode.

Creating DVD video titles using DVD_+RW/DVD_*Rdiscs

With the DVD-VR330, you can create your own DVD video

titles on 4.7 GB DVD_+RW/DVD_+Ror 8.bGB DVD_+Rdiscs.

A Variety of Recording Options

Select an appropriate recording mode between XP, SP, LP

and EP to meet your recording needs. (See page 59.)

• XP mode - High quality, about 1 hour

• SP mode - Standard quality, about 2 hours

• LP mode - Low quality, about 4 hours

• EP mode - Lower quality, about 6 or 8 hours

- The dual layer DVD_+Rshave approximately double the

capacity of single layer DVD_+Rs. (See page 42.)

Copying digital camcorder content using DV input jack

Record digital camcorder images onto DVD-RAM/DVD_+

RW/DVD_+R discs or video tape using the DV input jack

(IEEE 1394-4pin). (See page 61.)

High quality progressive scan

Progressive scanning provides high resolution and flicker

free video. The 10-bit 54-MHz DAC, 2D Y/C Separating cir-

cuitry and Time Base Corrector processor technology pro-

vide you with the highest image playback and recording

quality. (See page 20.)

Component progressive scan output video is available in

both DVD and VCR modes.

A variety of functions with easy-to-use user interface

Integrated menu system and messaging functionality allow

you to perform the desired operations easily and conve-

niently. With a DVD-RAM/DVD-RW(VR mode) disc, you

can edit recorded images, create playlist, and edit video in

specific sequence according to your needs.

Make sure to check the following terms before reading

the user's manual.

Icon Term Definition

This involves a function available

in DVD or DVD-R/DVD-RW(V)/+R

DVD

discs that have been recorded

and finalized.

This involves a function available

RAM

in DVD-RAM.

This involves a function available

-RW

_,:_,_;;_ in DVD-RW.

This involves a function available

-R

in DVD-R.

This involves a function available

+RW

in DVD+RW.

This involves a function available

in DVD+R.

This involves a function available

CD in a data CD (CD-R or CD-RW).

This involves a function available

JPEG in CD-R/-RW or DVD+R/+RW/

-RAM discs.

This involves a function available

MP3 in CD-R/-RW or DVD+R/+RW/

-RAM discs.

This involves a case where a

Caution function does not operate or

settings may be cancelled.

This involves tips or instructions

NOTE on the page that help each

function operate.

iOne-Toucl" A function that can be operated

button by using only one button.

i ANYKEY A function that can be operated

i button by usingANYKEY button.

_2006 Samsung Electronics Co.

manual may be reproduced or copied without the prior

written permission of Samsung Electronics Co.

1) Be sure to be familiar with Safety Instructions before

using this product. (See pages 2_5)

2) If a problem occurs, check the Troubleshooting.

(See pages 91 _93)

8 - English

This unit can record on the following types of discs.

If you want to repeatedly record on the same disc or

you want to edit the disc after recording, select a

rewritable DVD_+RW or DVD-RAM type disc. If you

want to save a recording without any changes,

choose a non-rewritable DVD_+R.

Unlike a VCR, the recorder automatically starts format-

ting when an unused disc is inserted. This is required

for the preparation of recording on a disc.

Using a DVD=RAM

This type of disc can be formatted in DVD-Video

Recording format (VR mode). You can edit recorded

images and create a playlist in a specific sequence

according to your requirements.

Using a DVD_+RW/+R

• When an unused DVD_+RW/+R disc is first inserted,

the message "Uninitialized Disc. De you want to ini-

tialize this disc?" will be displayed.

If you select Yes, initializing will be start. DVD-RW

disc can be formatted in either DVD-Video format

(Video mode) or DVD-Video Recording format (VR

mode)

• With DVD+RW discs, there is no difference between

DVD-Video format (Video mode) and DVD-Video

Recording format (VR mode).

Using a DVD-R

Initializing disc is unnecessary and only V mode

Recording is supported. You can play this type of disc

on various DVD components only when they have

been finalized.

g You can only use either the VR or Video

mode on a DVD-RW, but not both at the

same time.

g You can format a DVD-RW to V or VR

mode using disc manager.

It should be noted that the disc's data will

be lost when changing formats.

There are two different recording methods: Direct

Recording and Timer Recording. Timer recording is

classified as a Date : Once, Daily or Weekly.

Recording mode : XP (high quality mode), SP (stan-

dard quality mode), LP (long recording mode), and

EP (extended mode).

You can select the title you want to play in a displayed

menu and then immediately start playback.

A DVD consists of sections called titles, and sub sec-

tions called chapters.

During recording, a title is created between two points

where you start and stop recording. Chapters will be

created automatically when you finalize recording on

DVD-R / DVD-RW discs in Video mode.

You can make your own chapters on DVD+RWs and

edit them using the Chapter Edit menu.

The chapter's length (interval between chapters) varies

according to the recording mode.

Editing on discs is easier than conventional video

tapes. The recorder supports many different edit func-

tions, possible only with DVDs.

With a simple and easy edit menu, you can operate

various edit functions, such as delete, copy, rename,

lock, etc., on a recorded title.

Creating a playlist (DVD=RAM/-RW in VR mode)

With this recorder, you can create a new playlist on

the same disc and edit it without changing the

original recording.

iiiiiii i i! i! i! i! i! i! i! i! iii!ii!ii!iiiiiii!i

iiiiiii_iiii_iiiiiiiii!iiii_i_

iiiiiii_iiiiii,,iiiiiiiiiiiiiii_

iiii_,_!!i!i!i!iii!i!i!i!i!i!i!i!i!i!i!i!i!

"_' English - 9

iiiiiiiiiiiiiiiiiii!!iiiii!i:iiii!iii!i!!i!i !! !! !! !i i !

iiii'ii!iiii!iiiiii!iiiii!_%iiii_i_i_i!i

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i_i_i_i_i_ii_ii

To play your DVD on other DVD players, finalizing

may be necessary. First, finish all editing and record-

ing operations, then finalize the disc.

When using a DVD-RW disc in VR Mode

Although finalizing is generally unnecessary when

playing the disc on a VR Mode compatible compo-

nent, a finalized disc should be used for playback.

When using a DVD-RW disc in Video Mode

The disc should be finalized first to enable playback

on anything other than this recorder. No more editing

or recording can be made on the disc once it has

been finalized.

When using a DVD±R disc

You should finalize the disc to play it on a component

other than this recorder. You cannot edit or record on

the disc once it has been finalized.

10 - English

| Front Panel

iiiiiiiiiiiii i i! i!iiii i ii i! i! i i ii iiiiiiiiiiiiiiiiiiiiiii i i!ii!iii i!

i i ii iiii ii!ii!ii!ii!ii!ii!ii!ii!ii!iiiii!i!i!

.....iili__;_

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

1. DVD DECK

2. DVD OPEN/CLOSE BUTTON

3. VCR DECK

4. VCR EJECT BUTTON

5. POWER BUTTON

6. VIDEO INPUT JACK (AV 2 IN)

7. AUDIO L, R INPUT JACKS (AV 2 IN)

8. DV INPUT JACK

9. RSCAN BUTTON

10. FRONT PANEL DISPLAY

11. DVDNCR SELECT BUTTON

12. COPY BUTTON

13. CHANNEL ^/V BUTTONS

14. RECORD BUTTON

15. PLAY/STILL, REW/SKIR R_SKIR STOP

BUTTONS

| FrontPanel Display

1. DVD is activated.

2. DVD-RAM is activated.

3. DVD(_+)R or DVD(_+)RW is actived.

4. Progressive Scan mode is activated.

5. Record function is activated.

6. VCR is activated.

7. DVD or CD media is loaded.

8. The time, counter position or current deck

status is indicated.

9. When you set a Timer recording,

this indicator appears.

10. VHS videotape is loaded.

English - 11

| RearPanel

iiiiiiiiiiiiiiiiiii!!iiiii!iiiili!iii!i!!i!i !! !! !! !i i !

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i_i_i_i_i_i_ii

Fall

The fan always revolves when the power is on.

Ensure a minimum of 4" clear space on all sides of the fan

when installing the product.

1. VIDEO INPUT JACK (AV 1 IN)

2. VIDEO OUT JACK (AV OUT)

3. AUDIO OUT JACKS

(COMPONENT OUT)

4. S-VIDEO IN/OUT JACKS

5. ANTIN JACK

6. ANTOUT (TO TV) JACK

7. AUDIO INPUT JACKS (AV 1 IN)

8. AUDIO OUT JACKS (AV OUT)

9. DIGITAL AUDIO OUT JACK (OPTICAL)

10. DIGITALAUDIO OUT JACK (COAXIAL)

11. VIDEO OUT JACKS (COMPONENT OUT)

| Accessories

Check for the supplied accessories below.

/,¢ %_

Audio/VideoCable

(AC39-00073A)

RF Cable for TV Remote Control User's Manual Quick Guide

(AC39-42001J) (AK59-00053A) (AK68-00995A) (AK68-00997A)

Batteries for Remote

Control (AAASize)

(AC43q2002H)

12 - English

10--

--18

1. DVD Button

Press this when you use a DVD.

2. TV Button

Press this to operate iV.

3. POWER Button

4. NUMBER Button

5. 100+ Button

Press this to select channel 100 or higher.

6. EADV/SKIP Button

7. Pmayback-related Buttons

Forward/Rewind, Search, Skip, Stop, Play/Pause

8. VOL (Volume) Button

IV volume adjustment

9. MENU Button

Press this to bring up the DVD Recorder & VCR's

setup menu.

10. ENTER/DIRECTION Buttons

(UP/DOWN or LEFT/RIGHT Buttons)

This button functions as a toggle switch.

11. INFO Button

Press this to display current setting or disc status.

12. TITLE LIST/DISC MENU Button

Press this to enter the TITLE LiST/Disc menu.

13.SUBTITLEButton

Pressthisto switchthe DVD'ssubtitlelanguage.

14.ANYKEYButton

Pressthisto setthe statusofthe disc thatis being

played.

15. RECButton

Pressthisto makea recordingon VCR,DVD-RAM/

+RW/+Rdiscs.

16.TO DVDCOPYButton

Pressthiswhenyoucopyfromthe VCRto the

DVD.

17. RECSPEEDButton

Pressthisto setthedesiredrecordingtimeand

picturequality.

18.VCR Button

Pressthiswhenyouuse aVCR.

19. iNPUTSEL Button

Pressthisto selectAV inputsignalinexternalinput

mode.(Tuner,AV input,DV input)

20. OPEN/CLOSEButton

Pressthisto openandclosethedisctray.

21.TV POWERButton

22.TVNCR Button

23. MARKERButton

Pressthisto bookmarkor marka positionwhile

playinga disc.

24. CH/TRKButton

Pressthisto selecta TV channel/Adjusttape

tracking.

25. RETURNButton

Returnsto a previousmenu.

26.AUDIO/TVMUTEButton

Pressthisto accessvariousaudiofunctions.

Thisoperatesas soundmute.(TVmode)

27. CANCELButton

28. PLAYLIST/TITLEMENUButton

Pressthisto enterthe Editplaylistfl]tlemenu.

29.ANGLE Button

Pressthisto accessvariouscameraangleson a

disc(ifthe disc containsmultiplecameraangles).

30.ZOOM Button

Zoomsin on screen.

31.TIMER RECButton

Pressthiswhenyou useTimerRecording.

32.TO VCR COPYButton

Pressthiswhenyoucopy fromthe DVDto theVCR.

33. RECPAUSEButton

Pressthistopauseduringrecording.

IIKeyLockFunction

If you do not want others to oDeratethe DVD Recorder &

VCR (for example ifyou have programmee a iimer recording)

you can set the equipment to lock out a button :on[roB.

,, Press and hold the iNFO button on the remo[econtrol for 5

seconds.

The display will show "SAFE" when the feature is activated

• To resume norma_mode, press and hold the INFO bu_on

again for 5 seconas.

"SAFE"will disappear and the DVD Recorder & VCR wi

opera[e normall,..

iii i i@ii!ii!ii!iiiii!i!i!

.....iili#_{

iiiiii_i_';!;!;!;!;!;!;!;!;!;!;!;!;

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

÷ This is a special remote control for the visually impaired, and has Braille points on the

POWE R(@), STOP( @ ) and PLAY( O ) buttons. EngIish - 13

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!i_i_

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_

HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH_

A Quick overview presented in this guide will give you

enough information to start using the recorder.

!!_!i_i!_ii_ii_ii_ii_i_ii_ii_ii_ii_ii_ii_ii_ii_ii_iiiii_i_i_i_i!_!_i_i!_!i!i!_ii_ii_ii_i!_i!_i!_i!_i!_i!ii_lllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllll_........

14 - English

o Note to CATV system installer : This reminder is

to call CATV system installer's attention to Article 820-40

of the National Electrical Code (Section 54 of Canadian

Electrical Code, Part I), that provides guidelines for

proper grounding and, in particular, specifies that the

cable ground shall be connected to the grounding

system of the building as close to the point of cable title

as practical.

ThereareseveralwaystoconnectyourDVDRecorder&VCR.Selecttheantennaconnectionthatbestsuitsyoubelow.

| Antenna + DVD Recorder & VCR + TV : No Cable box

You can record non-scrambled channels by selecting the channel on the DVD Recorder & VCR. Also use this

method if you watch channels without cable box.

RFCable

Wall

TOANTIN

TO ANT OUT

iiiiiiiiiiiiiiiiiiiiiiii!!!!iiiii!il.....

i !ii!ii!ii!ii!iiii!i!i!i!ilililiiiiiiiiil

))))))_i!ii_iiiiiiii_!)i)!_i

)))))ii_i)i)i)i)i)i)i)i)i)_ii_)i_)i_)i_)i_)i_)i_)i_)i

iiI_JS_!!i!i!ii

_ TO ANT INPUT

¢ = i IL_I

[] If you are using an off-air antenna that has 300-

ohm twin flat leads, use an external antenna

connector (300-75 ohm adaptor : not supplied)

to connect the antenna to the DVD Recorder &

VCR.

[] If you have two separate antennas (one VHF

and the other UHF), use a UHF/VHF combiner-

adaptor (available at most electronics shops) to

connect the antenna to the DVD Recorder &

VCR.

English - 15

iiiiiiiiiii! i

Antenna + Cable box + DVD Recorder & VCR + TV : Cable box with many scrambled

channels

You can record channels by selecting the channel on the cable box. You cannot record one channel while watching

another channel. Be sure that the cable box is turned on.

Wall

Sable box

TO ANT IN

TO ANT OUT

_1 TOANTINPUT

16 - English

Antenna + DVD Recorder & VCR + Cable box + TV : Cable box with a few scrambled

channels

You can record non-scrambled channels by selecting the channel on the cable box. You cannot record scrambled

channels that require a cable box.

Wall

TO ANT IN

TOANTOUT

TOANTINPUT

Cablebox

i!i!!!iii!iiiiii!i!i!!iii!!iiii!ili......

i _!iiii!iiii!i!i!i!iiiiiiiil

iiiiii_i!ii_iiiiiiii_!ii!_!_i

ii!iiii_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiill

iii_JS_!!iiii

English - 17

iiiiiiiii! i

There are several ways to connect your DVD Recorder & VCR. Select one of the video connections on the following pages.

You must use one of the following audio/video connections on this unit.

| Connecting to a Video input jack

Connect a video(yellow) cable between the VIDEO(yellow) OUT jack on DVD Recorder & VCR and VIDEO(yellow)

IN jack on the TV (orAV amplifier).

dioHideoI Yellow

Cablel -r_TTr_ _ L

White AUDIO

Red

* You will enjoy regular quality images.

* Connect audio cables(white and red) between the

AUDIO OUT jacks on the DVD Recorder & VCR and

AUDIO IN jacks on TV(or AV amplifier).

(See pages 21 _ 23)

18 - English

Connectingto an S-Video inputjack

Connect an S-Video cable(not supplied) between the S-VIDEO OUT jack on DVD Recorder & VCR and S-VIDEO

IN jack on your TV (orAV amplifier).

I_l'Jlhll

S-VIDEO

S-Video Cable

IllOl supplied

iiiiiiiii!ii!i!!i!iiiiiiiiii!!!!iiiii!il.....

i !ii!ii!ii!ii!iiii!i!i!i!ilililiiiiiiiiil

iiiiii_i!ii_iiiiiiii_!ii!_!_i

iiiiii_,_,i;iiiiiiiiiiiiii;

i _!_i;il;il;il;il;il;il;il;

iiI_JS_!!i!i!ii

• You will enjoy high quality images. S-Video separates

the picture element into black and white (Y) and color

video input mode.

• Connect audio cables(white and red) between the

AUDIO OUT jacks on the DVD Recorder & VCR and

AUDIO IN jacks on TV(or AV amplifier).

(See pages 21 - 23)

I S-Video and Component video output are

available only if your TV supports S-Video

input or Component video input, respectively.

If S-Video or Component video output does

not work, check the TV connections and the

TV input selection settings.

English - 19

| Connectingto Componentvideoinputjacks (Y,PB,PR)

Connect Component video cables (not supplied) between the COMPONENT OUT (Y,PB,PR) jacks on

DVD Recorder & VCR and COMPONENT IN (Y,PB,P_)jacks on your TV (orAV amplifier).

[I,[I]_ ",[|]ll_il

Component Cable

Inot sut)131iedl

* You will enjoy high quality accurate color reproduction

images. Component video separates the picture

element into black and White(Y), blue(PB), red(P_)

signals to present clear and clean images.

. Connect audio cables(white and red) between the

Component AUDIO OUT jacks on the DVD Recorder &

VCR and Component AUDIO IN jacks on TV(or AV

amplifier). (See pages 21 - 23)

,, Progressive scan

- If the your TV supports Progressive Scan, you can

enjoy higher quality video by pressing the RSCAN

button. (The component cable has to be connected.)

1. With the unit in stop mode, press the RSCAN but-

ton on the front of the DVD Recorder & VCR.

2. The message 'Press "Yes" to confirm Progressive

scan mode. Otherwise press "No"' will appear.

Press the 4 _ buttons to select Yes, and then

press the ENTER button.

.= Compared to standard interlaced video, progres-

sive scan doubles the amount of video lines fed to

your TV, resulting in a more stable, flicker-free,

and clear image than interlaced video. The pro-

gressive scan video output jack is used in pro-

gressive output mode. This is only available with

TVs that support progressive scan.

.= Progressive Scan Output (480p) Consumers

should note that not all high definition television

sets are fully compatible with this product and may

cause artifacts to be displayed in the picture.

If you experience 480p progressive scan picture

problems, it is recommended that you switch the

connection to the 'standard definition' output. If

there are questions regarding TV set compatibility

with this model, please contact our customer

service center at 1-800-SAMSUNG.

20 = English

Select one of the Audio connections on the following pages.

| Connecting to your TV

This connection will use your TV's speakers.

iiiiiiiii!i!iiiiiiiiii!!!iiiii!il

i _!ii!ii!ii!ii!iiii!i!i!i!ilililiiiiiiiiil

iiiiii_i!ii_iiiiiiii_!ii!_!_i

iiI_JS_!!i!i!ii

English - 21

iiiiiiiiiii! i

| Connecting to a stereo amplifier with analog input jacks

If your stereo amplifier only has AUDIO INPUT jacks(L and R), use the AUDIO OUT jacks.

FronlfL/sDeaKer

Audio/Video

Cable

ANALOGAUDIO

Fronl/R/sDeaker

22 - English

| Connectingto an AV amplifier with a digital inputjack

If your AV amplifier has a Dolby Digital or DTS decoder and a digital input jack, use this connection.

To enjoy Dotby Digital or DTS sound, you will need to set up the audio settings. (See page 35)

iiiil

HHHHHHHHHHHHHHHHHi,,_

.....

Itl'JIJI

Manufactured under license from Dolby

! /

Laboratories. "Dolby" and the double-D symbol are

English - 23

iiiiiiiii! i

This allows you to connect your DVD Recorder & VCR to other external devices and view or record their outputs.

| Connecting a VCR, Set-Top Bo×(STB) or DVD player to the AV 1 iN or S-ViDEO iN jacks

Connecting a VCR or external device to AV 1 IN jacks of the DVD Recorder & VCR.

You can record from connected equipment (VCR, STB or DVD).

S-VideoCable

(not supplied)

Audio/Video

Cable

L-- 6- _ L--f._

i i

I'_------- or _1

I You can also use the AV 2 IN jacks on the

front panel of the DVD Recorder & VCR.

I Press the INPUT SEE button to select the

AVl or S-Video input.

I Copy protected content cannot be recorded.

I Depending on your input connection, you

must choose AV 1 (Composite) or S-video.

(See page 39)

24 - English

Connecting a Carncorder to the AV 2 iN jacks

You can also use the AV 2 IN jacks on the front panel of the DVD Recorder & VCR. You can record from connected

equipment, such as a camcorder. When an input source is inserted into AV 2 IN while viewing TV, the input will be

switched to AV 2 IN automatically.

i !!!!!iiiiiiiiiiii!!!iiiii!ii!i!iiiili!ii.......

i !ii!ii!ii!ii!iiii!i!i!i!ilililiiiiiiiiil

iiiiii_i!ii_iiiiiiii_!ii!_!_i

iiI_JS_!!i!i!ii

} ,

I If the AV 2 In input source is not selected

automatically, press the INPUT SEE button

to select the AV 2 input.

English - 25

iiiiiiiiiii! i

iiiiiiii!iiii.i.i.i.i.i_ii_i_i_i_i,i'i:_i

| Connecting a Carncorder to the DV iN jack

If your camcorder has a DV output jack, connect it to the DV input jack of your DVD Recorder & VCR.

DV Cable

tool supplied)

I If the input is not selected automatically, use

INPUT SEL. button to select proper input.

}

26 - English

After all connections are complete, plug the power cord

in the wall outlet.

"Auto" appears in the front panel display. This

means that the current time is being set automati-

cally through the antenna under connection(Auto

Program). The setup may take several minutes.

When the DVD Recorder & VCR operates normally, the

current time is automatically set and displayed in the

front panel display.

Install Batteries in the Remote Control

,, Open the battery cover on the back of the

remote control.

.,nserttwoAAAbatteriesMakesurethatthepo,ar+s

(+ and -) are aligned correctly.

,, Replacethebatterycover. _++_'

if the remote control does not operate

properly:

" Check the polarity + - of the batteries (Dry-Cell)

,, Check if the batteries are drained.

,,Checkiftheremotesensorisblockedbyobstacles.

++++++++++++++++++++++++++++++++

" Check if there is any fluorescent lighting nearby.

Dispose of batteries according to local

environmental regulations. Do not put them in

the household trash.

English - 27

| Setting the Remote Control

You can control part of another manufacturer's TV

functions with this remote control.

• Buttons that can be controlled on your TV :

TV POWER, INPUT SEL., VOL +/-, CH/TRK (A/v),

TV MUTE, 0-9, 100+.

To determine whether your television is

compatible, follow the instructions below.

1. Switch your television on.

2. Point the remote control towards the television.

3. Press and hold the TV button and enter the two-figure

code simultaneously corresponding to the brand of

your television by pressing the appropriate number

buttons.

SAMSUNG 01,14,15,23,31 NEWSAN 27

DAEWOO 19 NOBLEX 25

EMERSON 21 PANASONIC 12,24

GRADIENTE 30 RCA 07,20

HITACHI 10 SANYO 05,20

JVC 11 SHARP 02,16,22

LG 06,08,18 SONY 03

LOEWE 28 TELEFUNKEN 26

MAGNAVOX 04 TOSHIBA 09

MITSUBISHI 13 ZENITH 17

Result: If your television is compatible with the remote

control, it will switch off.

It is now programmed to operate with the remote

control.

[] If several codes are indicated for your

_,_s_ television brand, try each one in turn until you

find one that works. If you replace the remote

control's batteries, you must set the brand code

again.

You can then control the television using the

following buttons.

TV POWER Used to switch the television on and off.

INPUT SEL. Used to select an external source.

VOL +/- Used to adjust the volume of the television.

OH/TRK(A/V) Used to select the desired channel.

TV MUTE Used to toggle the sound on and off.

0~9 Used to input number directly.

100+ Used to select channels over 100.

m The various functions may be able to be

, controlled on all televisions. If you encounter

problems, operate the television directly.

28 - English

The on-screen menus allow you to enable or disable

various functions on your DVD Recorder & VCR.

Use the following buttons to open and navigate through

the on-screen menus.

MENU Button

Press this button on the remote control to open

the on-screen MENU. Press again to exit the

on-screen MENU.

A/T,4/I,, Buttons

Press these buttons on the remote control to

move the selection bar _d'V,41/1_to cycle through

the menu options.

ENTER Button

Press this button on the remote control to confirm

any new settings.

RETURN Button

Press this button on the remote control to return to

the previous MENU screen displayed or to exit the

on-screen MENU.

iiiiiiiiiiiiiiiiiiiiiii!iii!ii!iiiiiiiiiiiiiiiiiiiiiiiiil

ii!ii! !ii!ii!ii!ii!ii!ii!ii!ii!ii!i

iii!i'!i_iiiiiiiiiiiii_

English - 29

Press the AT buttons to select Auto Clock Set,

then press the ENTER or _ button.

This menu is used to set the current time. You need to

set the time to use timer recording.

[] You must have the antenna connected to set

the Auto Clock. See pages 15-17 for Antenna

Connections.

[] The Clock will be automatically set when you

turn off the recorder.

With the unit in Stop mode/No Disc mode, press

the MENU button.

Press the AT buttons to select Setup, then press

the ENTER or _- button.

[] If your clock is set to the wrong time zone or

daylight saving, you can adjust these settings

without turning off the Auto Clock Set function.

Press the A'_' buttons to select the sub menu

(Clock Data CH, Time Zone or Daylight Saving),

then press the ENTER or _,- button.

Clock Data OH

Press the &T buttons to select a channel that

carries a time signal, then press the ENTER button.

Select Auto to set the channel automatically.

Press the AT buttons to select Clock Set, then

press the ENTER or _- button.

Time Zone

Press the _' buttons to select the time zone of

your area, then press the ENTER or _ button.

Select Automatic to set the time zone automatically.

30 - English

| DaylightSaving

Press the AT buttons to select Yes or No, then

press the ENTER or _ button.

Select Automatic to set the daylight saving

automatically.

Press the AT buttons to select Clock Set, then

press the ENTER or I_ button.

If Auto Setup fails to set the DVD Recorder & VCR's inter-

nal clock by locating a local TV station, follow these steps

to set the date and time manually.

For accurate Timer Recording, your DVD Recorder

& VCR's internal clock must be set correctly.

With the unit in Stop mode/No Disc mode, press

the MENU button.

Press the AT buttons to select Manual Clock

Set, then press the ENTER or I_ button.

Press the AT4 _ buttons to select the Current Date

and Time, then press the ENTER button.

When the current time is stored in memory and

then the set is powered off, the current time will

appear in the front panel display.

AT : Sets the value

You can set the value using the number (0-9)

buttons.

_1 _: Moves to items

iiiiiiiiiiiiiiiiiiiiiii!iii!ii!iiiiiiiiiiiiiiiiiiiiiiiiil

ii!ii! !ii!ii!ii!ii!ii!ii!ii!ii!ii!i

iii!!!ii_iiiiiiiiiiiiii_

..........

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

Press the AT buttons to select Setup, then press

the ENTER or I_ button.

English - 31

Press the AT buttons to select Antenna/Cable

TV, then press the ENTER or _ button.

This feature allows you to manually set the DVD

Recorder & VCR's tuner band to Antenna or Cable,

whichever you connected to the Antenna In jack during

initial setup.

,, Use this setting only if Auto Setup detected the

incorrect tuner band, i.e. channels are coming in on

the wrong channel numbers.

With the unit in Stop mode/No Disc mode, press

the MENU button.

Press the AT buttons to select Setup, then press

the ENTER or _- button.

Select the Antenna or Cable TV(Signal Source)

that matches the antenna connection you selected

on pages 15-17.

• Antenna - Select this if the DVD Recorder &

VCR is connected to an indoor or outdoor

VHF/UHF antenna. (See pages 15, 17)

,, Cable TV - Select this if the DVD Recorder &

VCR is connected to a cable TV. (See page 16)

Auto Channel Memory will automatically seek and store

all active channels in your area.

With the unit in Stop mode/No Disc mode, press

the MENU button.

Press the AT buttons to select Channel Set,

then press ENTER or _,- button.

Press the AT buttons to select Setup, then press

the ENTER or _" button.

Press the _' buttons to select Channel Set,

then press the ENTER or _- button.

32 - English

Press the AT buttons to select Auto Channel A Press the AT buttons to select Channel

Memory, then press the ENTER or I_ button. _ Add/Delete, then press the ENTER or I_ button.

,, The DVD Recorder & VCR will automatically

search for all available channels in the selected

tuner band. This procedure may take a few

minutes to complete.

,, When finished, the lowest channel will be dis-

played.

If you want to stop or cancel scanning, press the

ENTER button. Then select 'YES'.

Press the AT or number buttons to select the

channels you want to add or delete on the Select

channel screen. Then, press the ENTER button.

• Using CN/TRK (^/v) buttonsfor channel selection

allowsthe user to add/deleteone channel at a time.

Using AT buttonsfor channel selectionjumps to

the nextchannel memorizedinAuto Channel

Memory.

Press the _11_ buttons to select Add or Delete,

then press the ENTER button.

iiiiiiiiiiiiiiiiiiiiiii!iii!ii!iiiiiiiiiiiiiiiiiiiiiiiiil

ii!ii! !ii!ii!ii!ii!ii!ii!ii!ii!ii!i

iii!i'!ii_iiiiiiiiiiiiiii_

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

Use this feature if Auto Channel Memory missed a

channel that you would like to add or if you wish to

remove a channel.

With the unit in Stop mode/No Disc mode, press

the MENU button.

Press the A_ buttons to select Setup, then press

the ENTER or I_ button.

Press the AT buttons to select Channel Set, then

press the ENTER or I_ button.

When you connect the DVD Recorder & VCR to your

TV with the RF Antenna Cable, follow the steps below

to set the RF Output Channel.

With the unit in Stop mode/No Disc mode, press

the MENU button.

Press the AT buttons to select Setup, then press

the ENTER or I_ button.

English - 33

Press the AT buttons to select Channel Set, _Jb Press the AT buttons to select Setup, then press

then press ENTER or _ button. _,, the ENTER or _ button.

Press the AT buttons to select RF Output

Channel, then press the ENTER or _, button.

Press the AT buttons to select CR3 or CR4, then

press the ENTER or _ button.

The message "Please tune your TV to channel 3

(4)" will appear on the screen. Change your TV

channel to CH3 or CH4 to match the RF Output

Channel of the DVD Recorder & VCR.

Press the AT buttons to select Language, then

press the ENTER or _ button.

Language setup menu will be displayed.

Press the AT buttons to select the desired

language option, press the ENTER or _, button.

If you set audio, subtitle, disc menu and on-screen

menu language in advance, they will come up

automatically every time you watch a movie.

If the selected language is not recorded on the disc,

the original pre-recorded language is selected.

With the unit in Stop mode/No Disc mode, press

the MENU button.

• Audio: For the disc audio language.

• Subtitle: For the disc subtitles.

• Disc Menu: For the disc menu contained on the

disc.

On-Screen Menu: For the on-screen menu of

your DVD Recorder & VCR.

Press the A_' buttons to select the desired

language, then press the ENTER or _- button.

[] Press the RETURN or _ button to return to the

previous menu. Press the MENU button to exit

the menu.

[] The selected language will only appear if it is

supported on the disc.

34- English

Allows you to setup the audio device and sound status

settings depending on the audio system in use.

With the unit in Stop mode/No Disc mode, press

the MENU button.

Digital Output

1. PCM : Converts to PCM(2CH) 48kHz audio.

Select PCM when using the Analog Audio

Outputs.

2. Bitstream : Converts to Dolby Digital Bitstream

(5.1CH). Select Bitstream when using

the Digital Audio Outputs.

B Be sure to select the correct Digital Output or

_.t, no audio will be heard.

Press the AT buttons to select Setup, then press

the ENTER or _ button.

Press the AT buttons to select Audio, then press

the ENTER or _ button.

Audio setup menu will be displayed.

DTS

1. Off : Doesn't output digital signal.

2. On : Outputs DTS Bitstream via digital output

only. Select DTS when connecting to a DTS

Decoder.

When DTS soundtrack is played, sound is not

_t output from Analog Audio Output.

| Dynamic Compression

This is only active when a Dolby Digital signal is

detected.

1. On : When the Movie soundtracks are played at

low volume or from small speakers, the

system can apply appropriate compression

to make low-level content more intelligible

and prevent dramatic passages from getting

toe loud.

2. Off : You can enjoy the movie with the standard

Dynamic Range.

iiiiiiiiiiiiiiiiiiiiiii!iii!ii!iiiiiiiiiiiiiiiiiiiiiiiiil

ii!ii! !ii!ii!ii!ii!ii!ii!ii!ii!ii!i

iii!i'!i_iiiiiiiiiiiii_

..........

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

Press the AT buttons to select the desired audio

option, then press the ENTER or _,-button.

Press the A_ buttons to select the desired item,

then press the ENTER or _ button.

[] Press the RETURN or _1 button to return to the

previous menu.

Press the MENU button to exit the menu.

English - 35

iiiiiiiiiiiiiiiiiiiiiiiii_iiiiiiil

iiiiiiii'i!_iii:iiiii_!ijjjjj_i_!iiii_il;!_ii_ii_ii_i,!i_ii!;!i!i

iiiiiiiiii!iiiiii!i;_iiiii!ii

¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸8¸¸_._

iiiiiiiiiiiiiiii_i!iiiiiiiiiii

This function allows you to setup the TV screen

settings.

With the unit in Stop mode/No Disc mode, press

the MENU button.

Press the AT buttons to select Setup, then press

the ENTER or _, button.

Press the AT buttons to select Video, then press

the ENTER or _ button.

Video option menu will be displayed.

Press the AT buttons to select the desired video

option, then press the ENTER or _, button.

| TV Aspect

Depending on the type of television you have, you

may want to adjust the screen setting. (aspect ratio)

• 4:3 Letter Box : Select when you want to see the

total 16:9 ratio screen DVD sup-

plies, even though you have a TV

with a 4:3 ratio screen. Black

bars will appear at the top and

bottom of the screen.

• 4:3 Pan & Scan : Select this for a conventional

size TV when you want to see

the central portion of the 16:9

screen. (Extreme left and right

side of movie picture will be cut

off.)

• 16:9 Wide : You can view the full 16:9 picture on

your wide-screen TV.

| input Level

Adjusts the level of the input signal.

• Darker : If you feel the screen is too light

and you want to make the screen

darker.

• Lighter : If you feel the screen is too dark

and you want to make the screen

lighter.

| Black Level

Adjusts the black level of the screen.

• 7.5 IRE : This will enhance the black level for

increased brightness/contrast when

viewing DVDs.

Select this when you want to make the

screen lighter.

• 0 IRE : This is the standard NTSC reference black

level for consistent brightness/contrast

across all sources.

Select this when you want to make the

screen darker.

Press the AT buttons to select the desired item,

then press the ENTER or _, button.

[] Press the RETURN or _1 button to return to the

previous menu.

Press the MENU button to exit the menu.

| 3D Noise Reduction

• Off : Normal

• On : Select to remove noise from the screen.

This function depends on disc type. It may not

work for some disc types.

[] IRE: Short for the Institute of Radio Engineers.

An IRE unit is a relative unit of measure

equaling 1/140th of the peak-to peak (p-p)

video amplitude.

36 - English

The Re-enter Password screen appears to confirm

the password. Enter your password again, and

then press the ENTER or _ button.

The Parental Control function works in conjunction with

DVDs that have been assigned a rating - which helps

you control the types of DVDs that your family watches.

There are up to 8 rating levels on a disc.

With the unit in Stop mode/No Disc mode, press

the MENU button on the remote control.

Press the AT buttons to select Setup, then press

the ENTER or _ button.

Press the AT buttons to select Parental Control,

then press the ENTER or _,-button.

Press the A_' buttons to select On, then press

the ENTER or _ button.

The Parental Control screen appears.

Press the RETURN or _1 button to return to the

previous menu. Press the MENU button to exit the

menu.

Refer to Troubleshooting if you forget your pass-

word. (See page 91)

| About the Rating Level

Press the AT buttons to select Rating Level,

then press the ENTER or _ button.

iiiiiiiiiiiiiiiiiiiiiii!iii!ii!iiiiiiiiiiiiiiiiiiiiiiiiil

ii!ii! !ii!ii!ii!ii!ii!ii!ii!ii!ii!i

iii!i!ii_iiiiiiiiiiiii_

Create a 4-digit password using the 0 to 9 buttons

on the remote control.

Press the AT buttons to select the rating level

you want, then press the ENTER or _,,button.

For example, if you select up to Level 6, discs that

contain Level 7, 8 will not play. A larger number

indicates that the program is intended for adult

use only.

English - 37

| About the Change Password

Press the AT buttons to select Change Password,

then press the ENTER or I_ button.

This function allows you to setup the VCR.

With the unit in Stop mode/No Disc mode, press

the MENU button.

Enter the 4-digit password using the number buttons

on the remote control.

The 'Confirm the password' message will be

displayed.

Press the AT buttons to select Setup, then press

the ENTER or I_ button.

Press the AT buttons to select System, then

press the ENTER or I_ button.

Enter your password again.

Press the AT buttons to select VCR, then press

the ENTER or I_ button.

i Press the RETURN or _1button to return to the

previous menu.

Press the MENU button to exit the menu.

38 - English

Press the AT buttons to select the desired VCR

option, then press the ENTER or I_ button.

Press the AT buttons to select the desired item,

then press the ENTER or _ button.

Tape Length

This information is usually printed on the tape box.

The menu cycles through: T-120, T-160 or T-180.

Once the type of cassette is set, the VCR can dis-

play the amount of time remaining on the tape when

you press the INFO button.

Auto Play

If you want your videotapes to play automatically

when you insert them, turn on Auto Play.

,, Off : Auto play is disabled.

,, On : The VCR will automatically begin playing a

video tape when it is inserted, as long as the

safety tab of the cassette has been removed.

You can watch video from an external component

through the AV 1(Composite) or S-video input jacks.

With the unit in Stop mode/No Disc mode, press

the MENU button.

Press the AT buttons to select Setup, then press

the ENTER or t,- button.

Press the AT buttons to select System, then

press the ENTER or t,- button.

iiiiiiiiiiiiiiiiiiiiiii!iii!ii!iiiiiiiiiiiiiiiiiiiiiiiiil

ii!ii! !ii!ii!ii!ii!ii!ii!ii!ii!ii!i

iii!ii_iiiiiiiiiiiii_

iiiiiiiiiiiiiiiiiiiiiiiiiiiiL

ijijijijijijijijijijijijijijijijiji

Auto Repeat

It sets the VCR to play a tape repeatedly (unless a

tape control is activated :Stop, Fast Forward or

Rewind).

Press the A'V buttons to select Video Input, then

press the ENTER or I_ button.

Press the _'_ buttons to select AV 1 or

S-Video, then press the ENTER or I_ button.

English - 39

ii!iiiiiiiiiiiiiiiiiiiiiiii_i_i!liiiiil

iiiiiiii'i!_iii:iiiii_!ijjjjj_i_!iiii_il;!_ii_ii_ii_i,!i_ii!_!i!i

¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸8¸¸_

iiiiiiiiiiiiiiii_!i!!iiiiiiiiii_ii

You can set the EP(Extended Play)mode's time setting

to 6 or 8hours.

With the unit in Stop mode/No Disc mode, press

the MENU button.

Press the AT buttons to select Setup, then press

the ENTER or I_ button.

Press the AT buttons to select System, then

press the ENTER or I_ button.

A DVD-Video consists of 'Titles' and 'Chapters'.

When you record one program, it makes one Title.

If you use this function, the Title will be divided into

Chapters.

(V mode)

With the unit in Stop mode/No Disc mode, press

the MENU button.

Press the AT buttons to select Setup, then press

the ENTER or I_ button.

Press the AT buttons to select DVD EP Mode

Time, then press the ENTER or I_ button.

Press the AT buttons to select System, then

press the ENTER or I_ button.

Press the AT buttons to select Chapter Creator,

then press the ENTER or I_ button.

Press the AT buttons to select 6 Hours or

8 Hours, then press the ENTER or I_ button.

Press the AT buttons to select On, then press

the ENTER or I_ button.

Press the MENU button to exit the menu.

Set the recording speed by pressing the REC

SPEED button on the remote (see page 59 for

more information on recording speeds).

40 - English

Press the REC button to start recording.

The message "Do you want to create the chapter

menu after this recording?" is displayed.

Press the 4 1_ buttons to select Yes and press

the ENTER button and recording begins.

In XP and SP mode, you must record at least 5

minutes to create a chapter. In LP and EP mode,

15 minutes.

Press the STOP button to stop recording.

0 To display the created titles, finalize the disc

(see page 86) and then press the TITLE MENU

button. The title menu will be displayed.

It takes about 10 seconds for a disc to load (initialize)

every time you turn on the unit. To bypass this initializa-

tion process, you can set the Quick Recording feature

to On. This enables you to record immediately without

having to wait for the disc to load.

.........................................................................................................................................................................._1HHHHHHHHHHHHHHHHHHHHHHHHHHHHH[_HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH_[¢_

With the unit in Stop mode/No Disc mode, press the

MENU button.

Pressthe A_' buttonsto select Setup, then press the

ENTERor I_ button.

Press the ,LT' buttons to select System, then press

the ENTER or I_ button.

iiiiiiiiiiiiiiiiiiiiiii!iii!ii!iiiiiiiiiiiiiiiiiiiiiiiiil

ii!ii! !ii!ii!ii!ii!ii!ii!ii!ii!ii!i

iii!i'!i_iiiiii!iiiiii_

iiiiiiiiiiiiiiiiiiiiiiiiiiiiL

To display the created chapters, select the

desired Title and then press the DISC MENU

button. The chapter menu for the selected Title

will be displayed.

On DVD-RW discs, additional chapters and

titles can be added to a finalized disc by

unfinalizing and recording again.On DVD-R

discs, once finalized, no additional chapters or

titles can be recorded.

The Automatic Chapter Creator function does

not work during Timer Recording or when you

turn the power off.

DVD-R discs cannot be unfinalized.

Press the ,_V buttons to select Quick Recording,

then press the ENTER or I_ button.

Press the A_' buttons to select On, then press the

ENTER or I_ button.

The Quick Recording is set to Off as default.

If this function is set to on, power consumption

_i_ will be increased when the unit is powered off.

English - 41

= !

in!i_!:,!:,!:i!i_:iriri,i;_!i_;_!_m!ii

%ii!!!!!>_llJa'iiiiiii

iiiiiiiiiiiiiiiiiiiiiii!1_iI_!1ii

iiiiiiiiiiiiiiiiii!¢¢_mili

iiiiiiiiiiiiiiii_iiiii]

This

42 - English

Road the following information before playing a disc.

| Region code (OVO-Video only)

(_ Both the DVD Recorder& VCR and the discs are

coded by region.Theseregionalcodes must match

in order for the disc to play. If the codesdo not

(_ match, the discwill not play.The Region Numberfor

this DVD Recorder& VCR is describedon the rear

panel of the DVD Recorder& VCR.

| Disc types that can be played

DiscTypes DiscLogo Recorded DiscShape

content

Singlesided(5")

DVD-VlDEO_ VIDEO Doubletided(5")

"'==",,,o_o AUDIO Singlesided(3.5")

Doubletided(3.5")

Singlesided(5')

_,_ AUDIO Singlesided(3.5")

AUDD-CD

Singlesided(5')

JPEGCD-R/-RW JPEGImagesSinglesided(3.5")

MP3CD-R/-RW MP3Audio Singlesided(W)

Singlesided(3.5")

DVD-RAM

DVD-RW

DVD-R

DVD+RW

DVD+R

Singlesided(5")

(4.7GB)

VIDEO

.AM AUDIO

Doublesided(5")

(9.4GB)

VIDEO

,,. AUDIO 5"(4.7GB)

VIDEO

. AUDIO

Singlelayer(5")

(4.7GB)

Dualhyer(5")

(8.5GB)

VIDEO

...................AUDIO 5"(4.7GB)

Singlelayer(5")

(4.7GB)

VIDEO

..... AUDIO

Duallayer(5")

(8.5GB)

Max.PlayingTime

orminute.

240

480

160

1hr(XP:ExcelentQuality)

4hrs(LP:LongPlayback)

6hrsor8h_s(EP:Extend_d)

4hrs/SP:StandardQuatty)

8hrs(LP:LongPlayback)

12o116hrs(EP:Extended)

2hrs(SP:StandardQua/ty)

6oi8hrs(EP:Extended)

4hrs(LP:LongPlayback)

6ol8hrs(EP:Extended)

2hrs(XP:ExcellentODdity)

4hrs(SP:StandardQua/ty)

11or15hrs(EP:Extended)

1hr(XP:ExcelentOual'ty)

2hrs(SP:StandardQua/ty)

4hrs(LP:LongPlayback)

6or8hrs(EP:Extended)

hrs(XP:ExcellentQuatty)

2hrs(SP:StandardQua/ty)

4hrs(LP:LongPlayback)

6oi8hrs(EP:Extended)

2hrs(XP:ExcellentQua/ty)

4hrs/SP:StandardQuatty)

8hrs/LP:LongPlayback)

11or15hrs(EP:Extended)

| Discs that cannot be played

,' DVD-Video with a region number other than "1" or "ALL"

,,3.9 GB DVD-R Disc for Authoring.

* A DVD+_R/DVD-RW(V) disc which has been recorded and

not finalized in a different manufacturer's recorder.

. PAL discs

* DVD-ROM/PD/MV-Disc/DivX Video Disc, etc

,, Video CD/CVD/SVCD/CD-ROM/CDV/CD-G/CDd

i This DVD Recorder & VCR can only operate with

discs that are compatible with DVD-RAM Standard

Version 2.0.

i Playback and/or recording may not work for some

types of discs or when specific operations, such as

angle change and aspect ratio adjustment, are

being performed. Information about the disc is

written in detail on the box. Please refer to this if

necessary.

i Do not allow the disc to become dirty or scratched,

fingerprints, dirt, dust, scratches and deposits of

cigarette smoke on the recording surface may

make it impossible to use the disc for recording.

DVD-RAM/_+RW/_+R discs may not be able to play

on some DVD players, depending on the player,

disc and the condition of the recording.

s Discs with PAL programs recorded on them can-

not be played using this product.

iiiiiiiiiiiiii_j _iilli_iiiiii:!l_iiiiiiiiiii_!!!i_!i_!i_!!ii!i!i!!_i_!i!ii!iilli_iiiiiiiiiliiii_i_ii!i_ii!i!i!i!_!!i!ii!i!ii!!ii!ii!i!ii!iliiiiiiiil_!i_iiiiiiiiiii!!i_!iiii!!i!!i!!!!i!ii!!!!!iiii!i!iiiii_i!!!iIi!i!!i!i!i!i!!!'_D _Ciiiiii!!!iiiiii!iii!!!ii!iii_iili!!:_|_!i_!i¸i¸!ii_i_iiii!ii!iiiii!!i!ii_iiiiiiiiiiiiiililii!ii!!iii!i!iliiiiiiiiiiiiii!!iiiiiiiiiiiiiiiiii!iiiii!ii_iiii!ii!iliililiiiili_i_i!iiiiiiii_i_i_;_;;_i_l_i_llill!illlll;lllii;lii_i_i_!_!_!_!_i_!i_i_!_!!i_!! ! .........i!!ii!ii!iiiiii_i_ii!ii!i!il!i!!i!!i!!i!!i!!i!!!i_i!

:NN

N:N

..........................................................................................................::_HHHHHHHHHHHHHHHHr_1r_HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHr_

Press the OPEN/CLOSE button.

Place a disc gently into the tray with the disc's

label facing up.

Press OPEN/CLOSE button to close the disc tray.

• Your DVD Recorder & VCR closes the disc

tray and plays the disc automatically.

• The recorder does not play discs automatically

after being powered on initially.

• When the recorder is powered on and a disc is

in the tray, the unit will be activated and wait in

stop status. Press the PLAY button to start play-

back.

Press the STOP button to stop playback.

}

_When you stop playing the disc, the DVD

Recorder & VCR remembers where you stopped.

When you press PLAY button again, it will pick up

where you left off. (unless the disc is removed or

the DVD Recorder & VCR is unplugged, or if you

press the STOP button twice.) This function is

only applicable to DVD-VlDEO, DVD-RAM,

DVD_+RW, DVD_+Ror Audio CDs (CD-DA).

Do not move your DVD Recorder & VCR while

playing, as this may cause damage to the disc.

Make sure to press the OPEN/CLOSE button

to open or close the disc tray.

Do not push the disc tray while it is being

opened or closed, as this may cause a product

malfunction.

Do not place foreign materials on or in the disc

tray.

Some functions may perform differently or be

disabled depending on the disc type. If this

occurs, refer to the instructions written on the

disc case.

Be especially careful that children's fingers are

not caught between the disc tray and the tray

chassis when it closes.

After turning power on, it will take a few

seconds until the DVD Recorder & VCR

operates.

English - 43

iiiiiii_iiii_iiiiiii_i!!i!!i!!i!!i!!i!!i!

iiii_!t,!i,!ii!i_ii_,i,i,i,i,ii_!i_;_!ai_iiii

iiiiiiiiii!!!!!>_>llJ21iiiiiii

iiiiiiiiiiiiiiiiiiiiiii!i_iI_!1ii

iiiiiiiiiiiiiiiiiii!!¢¢_iiiiiiii

iiiiiiiiiiiiiiii_iiiii]

!i:ii!i¸ ,ii!ili)

Some discs contain a dedicated menu system that

allows you to select special functions for title, chapters,

audio track, subtitles, film previews, information on

characters, etc.

| For DVD-VIDEOdisc

Press the DISC MENU button to enter the disc

menu of the disc.

,, Move to the setup menu related to playback opera-

tion.

,, You can select audio language and subtitle etc.,

provided by the disc.

Press the TITLE MENU button to move to the title

menu of the disc.

Use this button if the disc contains more than one

title. Some discs may not support the title menu

functionality.

i ovo_+=d

Press the TITLE LIST button to display title list.

'Or

Title List : The Title List is simply a list of titles

on a disc. If a title is deleted, that

title cannot be played again.

[] Playlist (DVD-RAM/-RW(VR)) :

A playlist is a custom-made list of titles.

When one playlist is played, only the titles

within the playlist will play and then stop.

Even if that playlist is deleted, the original

recording will not be deleted.

| Searching through a Chapter or Track

During the playback, press the SEARCH _41 or ),,1_

button on the remote control. Each time you press

the SEARCH button, the playback speed will

change as follows.

DVD-VIDEO/ _._Fast1/4_Fast1 ,__.).Fast2/_ Fast2_

DVD-RAM/DVD+RW_.).Fast3/_ Fast3_ _._Fast4/_ Fast4_

DVD_+R _.).Fast5/_ Fast5_ ).).Fast6/_ Fast6

AUDIOCD(OD-DA) r_, X2 _ X4 _ X8

L J

* You can scan the program in reverse order.

To return to normal speed playback, press the

I_ll button.

[] No sound is heard during Scan(Search) mode,

except on CDs (CD-DA). (You can hear the

sound during forward search (Fast 1) in disc.)

Depending on the disc type, the sound quality

may lower during Fast 1 mode.

| Skipping Chapters or Tracks

During the playback, press the I_l or _l button

on the remote control.

,, if you press the I_1_ button

If you press the I_ button, it moves to the begin-

ning of the chapter, track or marker(DVD-RAM,

DVD-RW(VR mode) ). Pressing the button once

again within 3 seconds returns to the beginning of

the previous chapter, track or marker(DVD-RAM,

DVD-RW(VR mode) ).

- if you press the i_1 button

If you press the _ button, it moves to the next

chapter, track or marker(DVD-RAM,DVD-RW

(VR mode) )

| Skipping ahead 30 seconds

During the playback, press EADV/SKIP button to

skip ahead exactly 30 seconds.

44 - English

| SlowMotionPlay (DVD-ViDEO/ DVD-RAM

/ DVD±RW/ DVD±R)

During pause mode, press the SEARCH 44 or _-_

button on the remote control for more than 1 sec-

ond.

• Each time you press the _, button :

I_, Slow 1 _ I_ Slow 2 _ ID,,Slow 3

• Each time you press the _14 button :

_11Slow 1 _ _11Slow 2 _ _ll Slow 3

To return to normal speed playback, press the

_,11button.

| Step Motion Play (DVD-ViDEO/ DVD-RAM

/ DVD±RW/ DVD±R)

During pause mode, press the EADV button on the

remote control.

• Each time the button is pressed, a new frame will

appear.

To return to normal speed playback, press the

I_11button.

i No sound is heard during Step or Slow mode.

!1oi/_

The ANYKEY functions allows you to easily search for

a desired scene by accessing title, chapter or time.

You can also change the subtitle and audio settings and

set some features including Repeat, Angle and Zoom.

| Moving to a scene directly using

the ANYKEY

,, If you want to move to a title or a chapter to find a

desired scene.

Press the ANYKEY button during playback.

Press the AT buttons to select Title, Chapter.

Press the _ _ buttons or number (0~9) buttons to

select the desired scene.

Then, press the ENTER button.

iiiiiii_iiii_;;;i_i!!i!!i!!i!!i!!i!!i!

iiiiiii_31111ilililililili

iiiiiiiiiiiiiiiiiiiiiiiiiiiii

English - 45

,, If you want to move to a desired time to help you find

a scene.

Press the ANYKEY button during playback.

Press the AT buttons to select Time.

Select repeat mode using 4 _ button.

Press the ENTER button.

• To make the screen disappear, press the

ANYKEY or RETURN button.

[] DVD-RAM/DVD-RW(VR mode), unfinalized

DVD_+R and unfinalized DVD-RW (Video

mode) do not repeat a chapter.

Enter the time in the sequence of hours, minutes,

and seconds using the number buttons, then

press the ENTER button.

[] This may not work for some discs. When an

Audio CD(CD-DA) or an MP3 disc is inserted,

depending on the disc type, the information

display may not be appear.

[] The Time Search function does not operate in

some discs.

[] To make the screen disappear, press the

ANYKEY button again.

Playing a Certain section Repeatedly

(A-B Repeat Playback)

Press the ANYKEY button during playback.

Press the AY buttons to select Repeat.

| Playing Repeatedly(Repeat Playback)

Press the ANYKEY button during playback.

Press the AT buttons to select Repeat.

Press the _1!_ button to select A-B, then press the

ENTER button.

Press the ENTER button at the point where you want

repeat play to start (A) and press it again at the point

where you want the repeat play to stop (B).

Repeat playback of the A-B section starts.

- To return to normal playback -

Press the CANCEL button to return to normal

playback.

[] If you set point (B) before five seconds has

,:_t< lapsed, the prohibition mark (Q) will appear.

[] CDs do not support the Repeat A-B function.

46 - English

| Selecting the SUBTITLE language

Subtitle languages may not work depending on the

disc type. This is only available during playback.

| Selecting the Audio language

Audio languages may not work depending on the

disc type. This is only available during playback.

Using the AUDIO button

Press the AUDIO button during playback.

Using the SUBTITLE button

Press the SUBTITLE button during playback.

Press the AT buttons to select the desired subti-

tle language.

,,To make the screen disappear, then press the

CANCEL or RETURN button.

Using the ANYKEY button

Press the ANYKEY button during playback.

Press the A'It' buttons to select Subtitle, then

press the 411_ buttons to select the desired subti-

tle language.

Press the AUDIO or AT buttons to select the

desired audio language.

,;iii

Using the ANYKEY button iiii!iiiiii_h_i:i_!i_!i_!i_!i_!i_!i_

iiiiiii_iiiiilililililili

=1 Press the ANYKEY button during playback. ,,,,,,, ,,,,,,,,

Press the AV buttons to select Audio, then press

the _1i_,, buttons to select the desired audio lan-

guage.

}0t

[] The subtitle display may be different depend-

ing on the disc type.

[] If the subtitles overlap, disable the caption

function on your TV.

[] Some discs allow you to select the language

for the disc menu only.

[] Audio languages may be different because

they are disc-specific.

[] Some discs allow you to select the audio

language for the disc menu only.

English - 47

If a DVD-VlDEO contains multiple angles of a particular

scene, you can use the Angle function. If the disc con-

tains multiple angles, ANGLE appears on the screen.

Press the ANYKEY button during playback.

iiiiiiiiii!!!!!,,_llJ21iiiiiii

iiiiiiiiiiiiiiiiiiiiiii!1_12_!1ii

iiiiiiiiiiiiiiiiiii!!¢¢_iiiiiiii

iiiiiiiiiiiiiiii_iiiii]

Press the AT button to select the desired angle.

Using the ANYKEY button

Press the ANYKEY button during playback.

Press the AT buttons to select Angle, then press

the _ _ buttons or number (0_9) buttons to select

the desired angle scene.

lot(

Press the A'V buttons to select Zoom, then press

the ENTER button. ( % ) will be displayed.

Press AT, _ _ buttons to move to the area you

want to enlarge.

Press the ENTER button.

Each time the ENTER button is pressed, the picture

is enlarged up to 4X (four times the normal size).

DVD-VIDEO/ normal size _ 2X _ 4X _ 2X

DVD-RAM/DVD_+RW/

DVD_+R -> normal size

[] You can also select Zoom function directly

lot< using ZOOM button on the remote control.

[] This function is disc-dependent, and may not

work all DVDs.

[] This function does not work when a DVD has not

been recorded with a multi-camera angle system.

48- English

(V mode)

Set marks at scenes you want to see again so that you

can start playback from the marked position.

Press the MARKER button during playback.

| Playing back a Bookmark

Press the MARKER button.

Press the 411_ buttons to select a bookmarked

scene.

Press the ENTER or I-II button to start playing

from the selected scene.

| Clearing a Bookmark

Press the MARKER button.

Press the ENTER button when the desired scene

appears.

,,The number 1 is displayed and the scene is

memorized.

Press the 411_ buttons to select a bookmarked

scene.

iiiiiii_iiii_;;;i_i!!i!!i!!i!!i!!i!!i!

iiiiiii_iiiiilililililili

iiiiiiiiiiiiiiiiiiiiiiiiiiiii

Press the 411_ button to move to the next position.

Press the ENTER button again when the desired

scene appears.

,, The number 2 is displayed and the scene is

memorized. Repeat above to bookmark other

positions. You can bookmark up to 10 scenes.

Press the CANCEL button to delete the selected

bookmark.

[] When the disc tray is opened and then

or, closed, bookmarks will disappear.

English = 49

Press the MARKER button during playback.

| Playing back a Marker

Press the MARKER button during playback.

Press the _1 _ buttons to select a marked scene.

iiiiiiiiii!!!i!>.>llJ21iiiiii

iiiiiiiiiiiiiiiiiiiiiii!i_iI_!1ii

iiiiiiiiiiiiiiiiiii!¢¢_iiiiiiii

iiiiiiiiiiiiiiii_iiiii]

Pressthe ENTER button when the desired scene

appears.

,, The number 01 is displayed and the scene is

memorized.

Press the _1 _ button to move to the next position.

Press the ENTER button again when the desired

scene appears.

Press the ENTER or _ll button to start playing

from the selected scene.

,, If you press the NEXT SKIP (_,-D,-I)button or the

PREVIOUS SKIP(l_)button in marker mode,

and the next or current marked point plays for

shorter than three seconds, playback starts from

the previous marked point.

| Clearing a Marker

Press the MARKER button during playback.

Press the 4 I_ buttons to select a marked scene.

Press the CANCEL button to delete the selected

mark.

,, The number 02 is displayed and the scene is

memorized.

,, DVD-RAM or DVD-RW (VR Mode) discs have

the Marker function instead of the Bookmark

function. The Marker function allows you to mark

up to 99 scenes. Since the scenes may be dis-

played as many different pages, numbering is

necessary. If a disc in use is encoded with Disc

Protect, Markers cannot be set or deleted. Only

playback is available.

,, When a marker is cleared while DVD-RAM/

DVD-RW(VR mode) is playing, marker numbers

will change. For example, if the 7th marker is

cleared after ten markers are registered, the

marker numbers after the eighth will automatical-

ly move ahead by one and the 8th marker

becomes the 7th.

50- English

Each disc has a variety of menu functions available.

| Raying an Audio CD (CD-DA)

Insert an Audio CD (CD-DA) into the disc tray.

,, The Audio CD menu appears and the tracks

(songs) are played automatically.

| Buttons on the Remote Control used

for CD playback

Press the AT buttons to select the track (song) to

start playback from, and then press the ENTER

button.

| Audio CD(CD=DA) Screen Elements

1. Play mode icon.

2. Current track (song): Displays the number of the track

currently being played.

3. Displays the current play index and total track number.

4. This shows the operating state of a disc and a playback

time corresponding to a portion that is currently played.

5. Displays the track list (song list) and the playing time of

each track.

6. Button display

1. I,_,q button: Returns to the beginning of the current

track when pressed during playback. If pressed

again, your DVD Recorder & VCR moves to and

plays the previous track.

If you press this button within three seconds after

playback starts, the previous track will be played.

If you press this button after three seconds, the

current track will be replayed from the beginning.

2. _l button: Plays the next track.

3. Press the (44/1_-) button: Fast Play (X2, X4, X8)

4. [] : Stops a track(song).

5. _ll : Plays a track(song) or pauses playback.

6. AV: Selects a track (song).

7. I_, ENTER button: Plays the selected track (song).

8. ANYKEY : To display the play mode window.

(Repeat or Play Option).

iiiiiii_iiii_iiiiiii_i!!i!!i!!i!!i!!i!!i!

iiiiiii6_31111ilililililili

iiiiiiiiiiiiiiiiiiiiiiiiiiiii

English = 51

| Playing an MP3 Disc

Insert an MP3 disc into the disc tray.

| Buttons on the Remote Control

used for MP3 disc playback

%ii!!!i!,_>llJ21iiiii!i

iiiiiiiiiiiiiiiiiiiiiii!i_i2_!;ii

iiiiiiiiiiiiiiiiii!¢¢_;;;;;;ii

iiiiiiiiiiiiiiii_iiiii]

Press the AT buttons to select the Disc Navigation,

and then press the ENTER or _- button.

Press the AT buttons to select the Music, and then

press the ENTER or I,- button.

Press the AY buttons to select the track (song) you

want to hear, and then press the ENTER button.

| MP3 Screen Elements

1. Play mode icon.

2. Current track (song): Displays the name of the track

being played.

3. Displays the current play index and total file number.

4. This shows the operating state of a disc and a playback

time corresponding to a portion that is currently played.

5. Displays the rap3 file and folder list (song list).

6. Button display.

7. MP3 file information

52- English

1. 1_141button: Returns to the beginning of the current

track when pressed during playback. If pressed

again, your DVD Recorder & VCR moves to and

plays the previous track.

If you press this button within three seconds after

playback starts, the previous track will be played.

If you press this button after three seconds, the

current track will be replayed from the beginning.

2. _!_1 button: Plays the next track.

3. [] : Stops a track(song).

4. ),-II : Plays a track(song) or pauses playback.

5. RETURN button: Moves to the folder to which the

current song belongs.

6. AY : Selects a track (song).

7. I_, ENTER button: Plays the selected track (song) or

displays the files in the selected folder.

8. ANYKEY : To display the play mode window.

(Repeat or Play Option).

Duringplayback,presstheANYKEYbutton.

TheRepeatmodewillbehighlighted.

DuringStop,PresstheANYKEYbutton.

ThePlayoptionwillbehighlighted.

Pressthe4 _ buttonstoselectthedesiredrepeat

modeyouwanttoplayrepeatedly,thenpressthe

ENTERbutton.

"Q3RepeatTrack(CD(CD-DA)/MP3)

"C_RepeatFolder(MP3)

"GORepeatDisc(CD(CD-DA)/MP3)

- To return to normal playback -

Press the CANCEL button to return to normal

playback.

Press the _ _- buttons to select a desired Play

Option, then press the ENTER button.

,, Normal: Tracks on a disc are played in the

order in which they were recorded on the disc.

,, Playlist: The Playlist playback option allows you to

select the order in which you want tracks to play.

Intro[ ] ]: The first 10 seconds of each track will be

played. If you want to listen to the music that you

have selected, press the ENTER button or _-II but-

ton. The play option will be changed to Normal Play.

When Intro Play is completed, Normal Play is per-

formed.

"Random[ R ]: The Random option plays a disc's

tracks in random order. After a random list is gener-

ated and played completely, another random list is

generated and played.

Random Play is continued until the play option is

changed.

iiiiiii_iiii_iiiiiii_i!!i!!i!!i!!i!!i!!i!

iiiiiii_iiiiilililililili

iiiiiiiiiiiiiiiiiiiiiiiiiiiii

English - 53

0 '(i¸¸¸!i:i!i!iiii:

You can register a maximum 30 tracks in the playlist.

In still mode, press the ANYKEY button.

The Play option will be highlighted.

Press the _ _ buttons to select Playlet, then

press the ENTER button.

Playlist screen is displayed.

iiiiiiiiii!!!iii,_llJ21iiiiiii

iiiiiiiiiiiiiiiiiiiiiii!1_12_!1ii

iiiiiiiiiiiiiiiiiii!!¢¢_iiiiiiii

iiiiiiiiiiiiiiii_iiiii]

Press the AT buttons to select tracks in the order

in which you want them to play, then press the

ENTER button.

Press the AT buttons to select Disc Navigation,

and then press the ENTER or I_ button.

Press the AT buttons to select Photo, and then

press the ENTER or I_ button.

Press the AT _1D,- buttons to select a picture.

If you selected a wrong track, press the _,-button,

then press the AT buttons to select the wrong

track. Press the CANCEL button. The wrong track

will be removed.

,, To see the next 8 pictures, press the _-I button.

,, To see the previous 8 pictures, press the NI41button.

Press the PLAY button to play the playlist.

54- English

-1 If you press the D,,ll button, the Slide Show

Speed screen will appear.

Press the _1_ buttons to set the slide show

speed, then press the ENTER button.

Insert a standard VHS tape into the VCR deck.

,, When a tape is inserted, power will turn on auto-

matically.

-2 Press the ENTER button with a picture selected

in the Album screen and select a display mode

(Album screen (_), Slide show ( _ ),

Rotation (r_q) or Zoom ( _ )) using the 4 1_

buttons, then press the ENTER button.

Press the _II(PLAY/PAUSE) button on the

remote control or on the front panel of the unit.

The videotape will begin to play automatically if

the Record Safety Tab is removed and Auto Play

is turned on.

: Returns to the Album screen.

: The unit enters slide show mode.

Before the slide show can begin, the picture

interval (Slide show speed) must be set.

: Each time the ENTER button is pressed, the

picture rotates 90 degrees clockwise.

: Each time the ENTER button is pressed, the

picture is enlarged up to 4X(four times the

normal size).

_. normal size _, 2X _, 4X _, 2X_

,, Press the ANYKEY button to display menu bar.

,, Press the RETURN button to clear the menu bar.

\ Record Safety Tab

Press the re(STOP) button on the remote control

or on the front panel of the unit.

The Tracking adjustment removes the white lines that

sometimes appear during playback because of slight

differences in recording decks. The CH/TRK (A/v)

button will automatically align the recorded tracks with

the playback heads to solve this problem. You may also

set tracking manually.

Adjust Tracking Manually During playback, press

the CH/TRK (A/v) buttons to remove white lines

from the picture.

iiiiiiiiiiiiii!!i!i!i

iiiiii ilili!ilili!i!i!ii i!i!ii!i

i _ii_ii(i_ii!i!i!i!i!ii_!i_!i_!i_!i_!i_!i_!i_!i_!i_!i

iiiiiii_i!iiiiiiiii_i

English - 55

iiiiiiiiii!!!!!>,>ll;21iiiiii

iiiiiiiiiiiiiiiiiiiiiii!i_iI_!1ii

iiiiiiiiiiiiiiiiii!¢¢_iiiiiii

iiiiiiiiiiiiiiii_iiiii]

While a videotape is playing, you can enjoy a variety of

special playback features, including Still, Frame Advance,

Skip, Slow motion, and more.

| Pause

In Play mode, press _I(PLAY/PAUSE)button to still

a single frame.

I Frame Advance

In Pause mode, press EADV/SKIP button to

advance to the next frame.

Fps/Review

In Play mode, press Forward (l_l_)button or Rewind

(414)button to Fps/review at two speeds:

,, Picture Search - Press and release repeatedly to

advance the tape forward or backward at 2,3,5,7

times normal speed.

,, Jet Search - Press and hold to advance the tape

forward or backward at 7 times normal speed.

Skip

In Play mode, press EADV/SKIP button to cue

ahead exactly 30 seconds. Press F.ADV/SKIP button

repeatedly up to 4 times to cue ahead 2 minutes.

Slow motion

In Pause mode, press _- button for slow motion.

Press the ),-_ button repeatedly to vary slow motion

speed from 1/5 to 1/30 of normal playback. Press

the PLAY button twice to resume normal viewing.

Each time you record a cassette on this DVD Recorder

& VCR, an "index" is automatically marked on the tape

when recording is started. The Search function allows

you to fast-forward or rewind to a specific index and

start playback from that point. Depending on the direc-

tion selected, the indexes are numbered as follows

,, This DVD Recorder & VCR uses a standard indexing

system (VISS). As a result, it will recognize any index-

es marked by other VCRs using the same system and

vice versa.

| GoTo Zero

Use this feature when you want to search for the

0:00:00 counter position on a cassette.

Press the CANCEL button at the point on the tape

where you want to set the counter to 0:00:00.

While a cassette is stopped, press the ANYKEY

button.

Press the AT buttons to select Go To Zero, then

press the ENTER button.

The VCR will rewind or fast forward, searching for

the 0:00:00 counter position, and then automati-

cally stop at that position.

The DVD Recorder & VCR allows you to playback high

quality S-VHS tapes.

Insert an S-VHS tape into the VCR deck.

Press _J] (PLAY/PAUSE) button on the remote

control or on the front panel to play a S-VHS tape.

56- English

| End Search

Use this feature when you want to search for a blank

position to record a program on a cassette.

While a cassette is stopped, press the ANYKEY

button.

Press the AT buttons to select Forward Intro

Scan or Reverse Intro Scan, then press the

ENTER button. When an Index mark is found, the

DVD Recorder & VCR will playback the tape for 5

seconds, after which it will continue searching for

the next Index mark.

Press the AT buttons to select End Search, then

press the ENTER button.

The VCR will fast forward, searching for a blank

position, and then automatically stop at that posi-

tion. If the VCR reaches the end of the tape during

end search, the tape will be ejected.

| Forward/ ReverseIntro Scan

Use scan and play when you don't know exactly

where a program is located on a cassette tape.

While a cassette is stopped, press the ANYKEY

button.

iiiiiii_iiii_iiiiiii_i!!i!!i!!i!!i!!i!!i!

iiiiiii6_31111ilililililili

iiiiiiiiiiiiiiiiiiiiiiiiiiiii

English = 57

iiiiiiiiiiiiiiilfi!_ifilfiil

iiiiiiiiiiiiiiiiiiii_!!!!!i!i

58 = English

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii !....

i,__ _ _iii,_!i_

This unit can record on various types of discs. Before

recording, read the following instructions and select the

disc type according to your preference.

| Recordable discs

This recorder can record on the following discs.

DVD-RAM DVD-RW DVD-R DVD+RW DVD+R

RAM R W R DV_÷R_Wit_le DVO÷R

" DVD_+RWs and DVD-RAMs are rewritable.

,, DVD_+Rs are non-rewritable.

Compatibility between Sarnsung and

other manufacturer's Recorders.

DiscTypes Recording

format

DVD-RAM VRMode

DVD-RW

VRMode

V Mode

DVD-R V Mode

DVD+RW

DVD+R

RecordingDevice FinalizingAdd_[bnaiRecording

inSarnsungRecorder

Samsung X Recordable

OtherCompany X Recordable

Samsung finalized Notrecordable

_otfinalized Recordeble

OtherCompany finalized Notrecordable

_otfinalized Recordeble

finalized Notrecordable

Samsung _otfinalized Recordeble

finalized Notrecordable

OtherCompany _otfinalized Notrecordable

finalized Notrecordable

Samsung _otfinalized Recordeble

finalized Notrecordable

OtherCompany

_otfinalized Notrecordable

Samsung X Recordable

OtherCompany X Notrecordablei_lsome_ses

finalized Notrecordable

Samsung _otfinalized Recordable

finalized Notrecordable

OtherCompany

_otfinalizedNotrecordableinsomecases

[] Finalize

- This closes the DVD-RW/_+Rso no additional

recording can be done.

[] Unfinalize

- This allows additional recording on a DVD-RW disc

originally recorded on the DVD-VR330.

- A DVD-RW disc that has been recorded by

DAO(Disc At Once) in a PC cannot be unfinalized.

- A DVD-RW disc that has been recorded in Video

Mode of a different maker's recorder cannot be

unfinalized.

- A DVD_+Rdisc cannot be unfinalized.

| Recording Formats

When you insert an unused disc, the following message

appears. Since available functions differ depending on

the disc type, select a disc that best fits your prefer-

ences.

DVD-RAM: Use after formatting the disc.

DVD_+RW/+R: When an unused DVD_+RW/+R disc is

first inserted, the message "Uninitialized

Disc Do you want to initialize this disc?"

will be displayed. If you select Yes, initial-

izing will be start.

When using a DVD-RW disc, you can change

the mode. Refer to Formatting a Disc on

page 86.

DVD-R: Initializing disc is unnecessary.

DVD-RW(Video mode)/-R

,, Chapters will be created automatically when you

finalize recording on DVD-R/DVD-RW discs in Video

mode.

• Simple editing (erasing titles/changing title name).

DVD-RAM/-RW(VR mode)

,, This mode involves multiple editing functions (such as

deletion of the whole title, partial deletion of a title,

etc.).

,, Various editing options using a created Playlist.

DVD+RW/+R

,, You can also make your own chapters on DVD+RWs

and edit them using the Chapter Edit menu.

(see pages 75 to 77)

| Recording Mode

With the unit in Stop mode, select one of four recording

modes by pressing the REC SPEED button repeatedly

for the desired recording time and picture quality.

In general, picture quality improves as the recording

time decreases.

In AUTO mode, the most suitable record mode is

adjusted automatically, according to remaining time on

the disc and length of the timer recording.

You can select only one mode from XP, SP, LP and EP

for timer recording.

Mode Characteristic RecordingTimes

DataRates

XP Selectwhenthe

(highqualitymode) videoqualityis Approx.1hour

important, about8 Mbps

SP Selectto recordin Approx.2 hours

(standardqualitymode) standardquality, about4 Mbps

Selectwhena long

LP recordingtimeis Approx.4 hours

(longrecordingmode) required, about2 Mbps

Selectwhena long Approx.6 hours/

EP recordingtime is about1.2Mbps

(extendedmode) required. Approx.8 hours/

about0.8Mbps

for timerrecording Approx60 to480Min

AUTO onlysee page63. approx0.8to8 Mbps

- The dual layer DVD_+Rs have approximately double

the capacity of single layer DVD_+Rs. (See page 42.)

| Unrecordable video

Pictures with copy protection cannot be recorded on this

DVD Recorder & VCR.

When the DVD Recorder & VCR receives a copy guard

signal while recording, recording stops and the following

message appears on the screen.

English = 59

ii!i!iiiii iiii i!iiiiiii

i:{'i_!_ii!iiiiiiiiii

:iii_i!i!i!i!i!i!i!i!!i¸

iiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiii!iiiiiiiii_7717_)i_ii_!7!!_i;i;i;i;i:_i

iiiiiiiiiiiiiiiiiiii_iiiiiTi

Concerning Copy Control Signals

TV broadcasts that contain copy control signals may have

one of the following three signal types, Copy-Free, Copy-

Once and Copy-Never. If you want to record a copy-once

type program, use DVD-RW with CPRM in VR Mode or

DVD-RAM discs.

C0py-Free C0py-Once Copy-Never

DVD-RW(Ver.1.1) 0

DVD-RW(Ver.1.1)

withCPRN

VRmode 0 O*

DVD-R 0

DVD-RAN(Ver2.0) 0 O*

DVD+R 0

DVD+RW 0

Once "Copy Once" has been recorded, additional recording

cannot be performed.

* compatible with CPRM.

- Content Protection for Recordable Media (CPRM)

CPRM is a mechanism that ties a recording to the

media on which it is recorded. It is supported by some

DVD recorders, but not by many DVD players. Each

blank recordable DVD has a unique 64-bit media ID

etched in the BCA(Burst Cutting Area). When protected

content is recorded onto the disc, it can be encrypted

with a 56-bit C2 (Cryptomeria) cipher derived from the

media ID. During playback, the ID is read from the BCA

and used to generate a key to decrypt the contents of

the disc. If the contents of the disc are copied to other

media, the ID will be absent or wrong and the data will

not be decryptable.

1. Check to make sure the antenna cable is connected.

2. Check the remaining time on the disc.

DVD-RAM/DVD_+RW/+R discs should be formatted or

initialized in advance before beginning recording.

(See page 59.)

Press the OPEN/CLOSE button and place a

recerdable disc on the disc tray.

Press the OPEN/CLOSE button to close the disc

tray.

Wait until "LOAD" disappears from the front panel

display.

Press the CH/TRK (A/V) buttons or number

buttons to select the channel you want to record.

Press the REC SPEED button repeatedly, to select the

recording speed (quality).

• XP(High, approx. 1 hour) _ SP(Standard,

approx. 2 hours) ;LP(Low, approx. 4 hours)

; EP(Extended Play, approx. 6 hours/8hours)

Press the REC button.

,, "®" is displayed on the screen and recording

begins.

Press the STOP button to stop or finish a recording

in progress.

,, The message "Updating the information of disc.

Please wait for a moment" is displayed.

| Pausing / Resuming

,, Press the REC PAUSE button to pause a recording

in progress.

,, Press the REC PAUSE button again during pause to

resume recording.

,, You can switch channels by pressing the CHfrRK

(A/V) buttons while recording pauses.

Recording will stop automatically if there is

no free space left for recording•

i Up to 99 titles can be recorded onto a DVD-

RAM/-RW/-R disc, and up to 48 titles onto a

DVD+RW/+R disc.

i If the power is interrupted due to power fail-

ure or other reasons, the title being recorded

will not be saved onto the disc.

i Recording will stop automatically if a copy

protected image is selected•

i Do not use DVD-R authoring discs with this

unit.

60 = English

Follow these directions to record onto a disc or a tape

from External Devices such as a Camcorder.

Connect the AV out jack of your External Device to

the AV IN jack on the front or rear of your DVD

Recorder & VCR using the Audio/Video Cable.

Power on your DVD Recorder & VCR and switch

to AV In mode by pressing the INPUT SEL. button

on the remote control.

The front panel display changes in the following

sequence depending on the Video input setting in

the menu.

AVI: [_ Channel Number _ AV 1 ; AV 24 DVq

S-Video: [* Channel Number ; SUPER ; AV 2; DV7

Press the REC SPEED button repeatedly to select

the recording speed(quality).

SP _ LP _ EP _ XP_

When your DVD Recorder & VCR is in the Stop

mode, start playback on your external device.

Press the REC button on your DVD Recorder &

VCR to start recording when the desired video is

displayed from the external device.

Press the STOP button on your DVD Recorder &

VCR when the recording is finished.

i,Ot

[] Also refer to the user manual for your External

Devices when recording through AV In jacks on

the DVD/VCR using Audio/video cable.

[] You can record an external source through

S-Video cable. (see page 24).

[] For more information on changing the Video

Input from AVl to S-Video, see page 39(Video

Input).

You may control your Camcorder using the IEEE1394

(DV) interface.

Follow these directions to record onto a disc or tape

from a camcorder that has a DV output jack.

Connect the DV output jack of your camcorder to

the DV input jack on the front of your DVD

Recorder & VCR using a DV cable.

Power on your DVD Recorder & VCR and switch

to DV mode by pressing the INPUT SEL. on the

remote control.

Press the REC SPEED button repeatedly to select

the recording speed(quality).

[_SP _ LP _ EP _ XP

If the input is set to DV, a playback/record menu that

enables camcorder control appears on the top of the

screen.

Select the Play icon on the upper part of the

screen to playback the camcorder and find the

starting position to copy.

To start recording, Press the 4 _- button to select

rec(O) icon in the top side of the screen, then

press the ENTER button.

You can press the REC button on the remote con-

trol to start recording. To display playback related

icons on the screen, press either direction button

on the remote control.

Press the STOP button on your DVD Recorder &

VCR when the recording is finished.

[] Some camcorders may not work with your

DVD Recorder & VCR even if they have a DV

output jack.

[] Also refer to the user manual for your cam-

corder when recording through the DV jack.

English - 61

ii!i!iiiii iiii i!iiiiiii

i:_!'i!_ii!iiiiiiiiii

:iii_i!i!i!i!i!i!i!i!iil

iiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiii_iiiiii!i

One-Touch Recording (OTR) allows you to add

recording time in preset increments up to 4 hours by

pressing the REC button repeatedly.

Press the CH/TRK (A/v) buttons or number but-

tons to select the channel to record.

If you want to record through a connected external

component, press the INPUT SEL. button to

select an appropriate external input(AVl, AV2 or

DV).

,, CATV channel: 1 to 125

"TV channel: 2 to 69

Press the REC button to start recording.

While in Record mode, press the REC button

again to activate the One-Touch Recording (OTR).

,, Record length 0:30 appears on the On-Screen

Display and the DVD Recorder & VCR will record

for exactly 30 minutes.

Continue pressing REC button to add recording

time in preset increments up to 4hours.

_0:30 _ 1:00 -_ 1:30 _ 2:00 -_ 3:00 _ 4:00 -_ Off_

,, The DVD Recorder & VCR stops recording

automatically when the time has elapsed.

I To stop recording

Press the STOP (m) button.

The message "Press STOP button once more to

cancel Timer Record." is displayed.

Press the STOP (l) button again.

The message "Updating the Information of disc.

Please wait for a moment." is displayed.

The clock (Setup - Clock Set) must be set before pro-

ceeding with a timer recording. (See page 30)

Press the OPEN/CLOSE button, and place a

recordable disc on the disc tray.

Press the OPEN/CLOSE button to close the disc

tray.

Wait until "LOAD" disappears from the front panel

display.

With the unit in Stop mode, press the MENU

button.

Press the AT buttons to select Timer Rec., then

press the ENTER or I_ button.

Press the AT buttons to select Timer Record,

then press the ENTER or _ button.

You can go to the Timer recording screen directly

by pressing the TIMER REC button.

The Timer Recording screen is displayed.

[] The timer counter decreases by the minute

from 4:00 to 0:00, then the DVD Recorder

& VCR stops recording.

62- English

Fill in the items using the h, T4 I,_ buttons.

4 I_ : Moves to the previous/next item,

AT or 0-9 : To set or change items in the

Scheduled Record List Menu.

• To : Select the media to record (DVD or VCR).

• Source : The video input source (AV 1, AV 2), or

the broadcasting channel you want to

make a timer recording from.

,, Date: Date that the timer recording starts

- There are three options when setting the date.

see below:

O To make a recording on a specific date, press the

AT or number buttons until the date you want

appears.

@ To make a recording at the same time every day

(Mon-Fri), press the AT buttons until Mon-Fri

appears:

® To make a recording on a specific day of the

week(Sun's-Sat's), press the AT buttons until

Sun's....Sat's appears:

,, Start/End Time : Start and end time of the timer

recording.

• Recording mode (DVD)

AUTO : Select when you want to set video quality auto-

matically. In AUTO mode, the most suitable

record mode is adjusted automatically, accord-

ing to remaining time on the disc and length of

the timer recording.

You can selected only one mode from XP, SP,

LP and EP for timer recording.

XP (high quality) : Select when audio and video qualities

are important. (Approx. 1 hour)

SP (standard quality) : Select to record in standard qual-

ity. (Approx. 2 hours)

LP (low quality) : Select when a long recording time is

required.(Approx. 4 hours)

EP (extended mode) : Select when a longer recording

time is required. (Approx.6 hours

at 1.2 Mbps or Approx.8 hours

at 0.8 Mbps )

When you are recording at EP mode on a

DVD-RW(V)/-R disc, it may not record for the

full 6 or 8 hours because the unit uses the

VBR(Variable Bit Rate) ENCODING system.

For example, if you record a program with a lot

of action, it uses a higher bit rate which in turn

consumes more disc memory.

• Recording mode (VCR)

AUTO : Select when you want to set video quality

automatically. The auto quality depends on

remaining time of VCR tape.

SP : Standard Play, for best picture quality.

SLP : Super Long Play, for maximum recording time

(3 times SP).

Press the ENTER button.

,, Q will appear on the front panel. It means that a

timer recording is registered.

If the timer settings overlap

The programs are recorded in order of priority.

If timer recording is set for the first program and

then again for the second program and both

programs overlap, the following message will

appear on the screen: "This setting is identical with

1,2." The message shows that the first program has

priority. After recording of the first program is

complete, the second program starts being

recorded.

To exit without saving the current setting

Press the MENU or TIMER REC button.

To return to the previous menu

Press the RETURN button if you don't want to set a

timer recording.

Turn the power off to finish the timer recording.

• (_ will blink if disc or tape is not inserted.

I The timer recording time may differ from the set

time depending on disc status and overall timer

recording status (for example, recording times

overlapping, or when the previous recording

ends within 3 minutes before the start time of

the next recording.)

ii!i!iiiii iiii i!iiiiiii

i:_!'i!_i!iiiiiiiiii

:iii_i!iiiiiiii!:¸

iiiiiiiiiiiiiiiiiiiiiiB

iiiiiiiiiiiiiiiiiiiiiiiiiiB

English = 63

Follow these directions to edit the timer record list.

Press the MENU button.

Press the AT button to select Timer Rec., then

press the ENTER or I_ button.

Press the AT button to select Edit, then press

the ENTER button.

• The Timer Recording screen is displayed.

Edit the items you want to modify. See the Timer

Recording section for more information on Timer

Recording Input items. (See page 63)

Press the ENTER button to confirm the edited set-

ting.

Press the MENU button after finishing the opera-

tion. The menu screen will disappear.

Press the AT button to select Scheduled Record

List, then press the ENTER or I_ button.

Press the AT button to select the number of the

scheduled record list you want to edit, then press

the ENTER or t, button.

,,The Edit and Delete items are displayed.

Follow these directions to delete a title from the timer

record list.

Press the MENU button.

Press the AT button to select Timer Rec., then

press the ENTER or t, button.

64- English

Press the AT button to select Scheduled

Record List, then press the ENTER or _ button.

Press the AT button to select the number of the

scheduled record list you want to delete, and then

press the ENTER button.

,, The Edit and Delete items are displayed.

Before starting

1. Check TV channel and Antenna connections.

2. Check the remaining time on the tape.

You can record a TV show in progress by inserting a

blank tape and pressing the o(REC) button. You can

even add time in preset increments up to 4 hours by

pressing the o(REC) button repeatedly.

Press the AT button to select Delete, then press

the ENTER or l_ button.

,, You will be prompted with the delete confirm

message such as "De you want to delete

'No.01 '?".

Press the _1 I_ buttons to select Yes, then press

the ENTER button.

,, The selected title will be deleted from the list.

Press the MENU button after finishing the opera-

tion. The menu screen will disappear.

[] You can not delete programs that are cur-

..,. rent_y being recorded.

Press the REC SPEED button on the remote con-

trol to set the Record Speed to one of the follow-

ing options:

• SP - Standard Play, for best picture quality.

• SLP - Super Long Play, for maximum recording

time (3 times SP).

[] The selected Record Speed will appear on the

i;4t,; front panel and on-screen displays.

Maximum Recording Time - SP vs. SLP

Tape Length SP (Standard Play) SLP (Super Long Play)

T-120 Approx. 2 hrs Approx. 6 hrs

T-160 Approx. 2hrs 40 mins Approx. 8 hrs

T-180 Approx. 3 hrs Approx.9 hrs

[] When you watch or record on the VCR during

i;4t,; DVD Recording, some function buttons may

not operate.

The message "This function is not available."

will be displayed.

ii!i!iiiii iiii i!iiiiiii

i:_!'i!_ii!iiiiiiiiii

:iii_i!i!i!i!i!i!i!i!iil

iiiiiiiiiiiiiiiiiiiiiiiiiiiii;;;

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_

English - 65

Press the e(REC) button on the remote control or

front panel.

For options while recording is in progress, see

"Special Recording Features".

Press the STOP button to stop or finish a record-

ing in progress.

I Pausing / Resuming

,, Press the REC PAUSE button to pause a recording

in progress.

,, Press the REC PAUSE button again during pause to

resume recording.

,, You can switch channels by pressing the CH/TRK

(A/V) buttons while recording pauses.

To Watch a Different Channel from the

One being Recorded

When you watching through the Antenna input

during recording, Press the TV/VCR button on the

remote control. Change the channel you want to

watch with the TV's remote.

Watch a different media during record-

ing

You can watch a DVD during VCR recording or

watch a Video tape during DVD recording.

,, During VCR recording, insert a DVD in the DVD

deck. The output will automatically change to the

DVD and start playback.

,, During DVD recording, insert a Video tape in the

VCR deck. The output will automatically change

to the VCR and start playback. (Only if tape is

missing the safety tab)

To Add Recording Time

Refer to the One-Touch Recording (OTR).

(See page 62)

iiiiiiiiiiiiiiiiiiii_iiiiiii!

Press INFO button on the remote control.

Following information will be displayed.

(Current deck status, recording speed, remaining

time, input channel, current time.)

While a recording is in progress, you can watch a dif-

ferent media, or add recording time in preset incre-

ments. (for example, you can watch VCR playback

while recording from a DVD and vice-versa)

Recording on the DVD and VCR at the

same time

You can record on the DVD and VCR at the same

time, but both modes must be set up to record

separately.

,, Press the DVD/VCR button to set the unit to

DVD or VCR mode.

,, Choose AV input mode (CH, AV1, AV2 or DV).

for DVD or VCR.

,, Choose REC mode for DVD or VCR.

,, Press REC button for DVD or VCR.

[] When the DVD Recorder & VCR is connected

to your TV using an S-Video or component

video cable, the video tape's playback screen

will not be displayed during DVD recording.

[] You cannot record different channels at the same

time.

[] The DVD and VCR cannot start recording at the

exact same time. You must set one mode te start

recording, then the other.

66 = English

To copy from "Edit Copylist", you need to make a

copylist in advance.

Select "New Copylist" and create the new playlist.

(See pages 78)

If you want to copy directly, choose "Direct Copy".

On DVD-RW(V)/DVD+RW/_+R disc, you can only use

Direct copy function.

You can copy from the DVD to VCR or VCR to DVD.

Check the remaining time on the tape and Disc.

| To copy from DVD to VCR

(VR mode)

With the unit in Stop mode, press the MENU

button.

Press the AT buttons to select desired copylist,

then press the ENTER or I_ button.

Press the AT buttons to select Copy, then press _ Press the AT buttons to select Copy, then press

the ENTER or _ button. U the ENTER or I_ button.

Press the AT buttons to select DVD --> VCR, |

then press the ENTER or D,-button.

Direct copy DVD to VCR

,, Insert a DVD disc you want to copy.

,, Insert a VHS tape.

,, Press the VCR copy button on front panel or

remote control (TO VCR).

,*To stop recording, press the STOP button.

ii!i!iiiii iiii i!iiiiiii

i:_!'i_!_ii!iiiiiiiiii

:iii_iiiiiiii!i!:¸

iiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

Press the AT buttons to select Edit Copylist,

then press the ENTER or _ button.

[] Copy function is not allowed in progressive

'- scan mode.

English - 67

| To copy from VCR to DVD

With the unit in Stop mode, press the MENU

button in stop mode.

Press the AT buttons to select Copy, then press

the ENTER or t,- button.

You can use the t,,11, I_l or ),,l_l, _1 or I_1_

buttons to search for the end position.

Press the ENTER button at the end point.

,, A copylist will be generated.

Repeat the above steps to create the copylist.

,, In VCR mode, the copylist cannot be saved.

Press the AT buttons to select VCR-->DVD, then

press the ENTER or I_ button.

Press the AT buttons to select desired copylist,

then press the ENTER or I_ button.

iiiiiiiiiiiiiiiiiiii_iiiiii!i

You can use the I_ll, 141_1or I_l)l, _ or t,-I_

buttons to search for the Start position.

Press the ENTER button at the start point.

Press the AT buttons to select Copy, then press

the ENTER or t,- button.

,, The VCR will fast forward, searching for a start

position and then automatically start a copy.

,, The Start and End points may not match up

exactly.

° If you want to copy all content, select Copy All.

| Direct copy VCR to DVD

,, Insert the VHS tape you want to copy.

,, Insert a recordable DVD disc.

,, Press DVD copy button on front panel or remote

control(TO DVD).

• To stop recording press the STOP button.

68 = English

Follow these instructions to play back a scene from the

Title List.

| Using the TITLE LiST button

Press the TITLE LIST button.

The Title List screen is displayed.

Press the AT buttons to select a title you want to

play from Title List, and then press the PLAY but-

ton.

The selected title will be played back.

To stop title play, press the STOP button.

To return the title list screen, press the TITLE

LIST button.

I Using the MENU button

Press the MENU button.

iii:

iiiiiiiiiiiiiiiiiiiiiiiiiii_

iiiiiiiiiiiiiiiiiiiiiiiiiiiii_

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_

English - 69

Press the AT buttons to select Title List, then

press the ENTER or _ button twice.

The Title List screen is displayed.

| Title List Screen Elements

®® ®

i'i i !iiiiiill

iiiiiiiiiiiiiiiii_!!i!i!i!i!i!i!i!!i_'_;_;i';i'iiiiii

Press the A'_' buttons to select a Title, then press

the ENTER or _ button.

The Edit menu is displayed:Play, Rename, Delete,

Edit, Protection(See pages 71-74)

Press the ,&Y buttons to select Play to play the

title list, then press the ENTER button.

The selected title will be played back.

Press the STOP button to stop playing.

To return the title list screen, press the TITLE LIST

button.

'_,ctc

i You can also play a recorded program by

pressing the ANYKEY button.

Playback screen for recorded titles.

Information window for the selected title: Title name,

recording date, lock status, recording mode

Recorded title No.

Recorded title name

Recording Length (i.e., the playing time)

Edit menu

Play: Plays the selected title.

Rename: Changes the name of a selected title.

Delete: Deletes the selected title from the list.

Edit: Deletes a section of title.

Protection: Locks or unlocks the selected title.

Button display

IThis may depend on the disc type.

, _:._ _ DVD-RW(V)/DVD+RW/_+R has limited editing

function.

I Free Space Function

This function is only available with DVD+RW discs.

If existing titles are deleted, new free space will be

created.

When you operate free space function, on-air TV

images will appear on the left side of the title list.

Press the TITLE LIST button.

The Title List screen is displayed.

Or use the MENU button.

,, Press the MENU button.

,,Press the AT buttons to select Title List, then

press the ENTER or D,-button twice.

i Press the ,_.V buttons to select Title.

i Press the 4 _ buttons to select to play the

title list, then press the ENTER button.

70 = English

Press the AT buttons to select a Title you want to

delete, then press the ENTER or I_ button.

Press the AT button to select Delete, then press

the ENTER or I_ button.

* You will be prompted with the confirmation

message 'Do you want to delete?'.

Press the 41 I,, buttons to select Yes, then press

the ENTER button.

The selected title has been deleted and Free

Space is displayed.

| Renaming(Labeling) a Title

Follow these instructions to rename a title list name,

i.e., to edit the title of a recorded program.

Press the TITLE LiST button.

The Title List screen is displayed.

Or use the MENU button.

* Press the MENU button.

* Press the AT buttons to select Title List, then

press the ENTER or I_ button twice.

Press the AT buttons to select a title you want to

rename from the Title List, then press the ENTER

or I_ button.

,, New free Space will be created equal to the

length of the deleted title.

- Recording a title

Press the AT button to select Free Space, then

press the ENTER or t, button.

On-air TV images will appear on the left side of

the title list.

Press the AT buttons to select Rename, then

press the ENTER or I_ button.

The Rename screen is displayed.

iii:

iiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

Press the ENTER button.

English = 71

Select the desired characters using the AT _11_

buttons, press the ENTER button.

,, Back Space: Moves the cursor one position

backwards.

• Space: Enters a blank and moves the cursor one

forward (to the right).

• Delete: Deletes the character at the cursor

position.

,, Clear: Deletes all the character inputs.

,, Save: Registers the character inputs.

Press the Ay _1 _- buttons to select Save, and

then press the ENTER button.

The changed title name is displayed in the title field

of the selected title.

| Locking(Protecting) a Title

Follow these instructions to lock a title to protect it from

accidental deletion.

Press the TITLE LIST button.

The Title List screen is displayed.

Or use the MENU button.

,, Press the MENU button.

• Press the AT buttons to select Title List, then

press the ENTER or I_ button twice.

Press the AT buttons to select a title yeu want to

protect in the Title List, then press the ENTER or

I_ button.

Press the AT buttons to select Protection, then

press the ENTER or I_ button.

ii i !iiiiiill

iiiiiiiiiiiiiiiii_!!i!i!i!i!i!i!i!!i_'_;_;i';i'iiiiii

Press the _11_ buttons to select On, then press

the ENTER button. The lock icon on the informa-

tion window for the selected title changes te the

locked status. (ct' ,'_ )

72- English

| Deleting a Title

Follow these instructions to delete a title from the Title

List.

Press the TITLE LIST button.

The Title List screen is displayed.

Or use the MENU button.

,, Press the MENU button.

,, Press the AT buttons to select Title List, then

press the ENTER or _ button twice.

DVD-RW(Video mode),DVD+RW, DVD_+R : Since

Playlist is not present, the message 'Do you want

to delete?' is displayed.

,, The message may depend on the type of disc.

Press the 4 1_buttons to select Yes, then press

the ENTER button.

Press the AT buttons to select a title you want to

delete in the Title List, then press the ENTER or t,-

button.

_You cannot delete a protected title.

If you want to delete a protected title, select

Off in the Title Protection menu.

Once a title is deleted from the Title List it

cannot be recovered.

_Once DVD_+R, DVD-RW is finalized, it cannot

be deleted.

IWith DVD_+R, titles are only deleted from the

menu, however, the Title remains physically

on the disc.

| Deleting a Section of a Title

Follow these instructions to delete a section of a

Title List title.

Press the AT buttons to select Delete, then

press the ENTER or _ button.

You will be prompted with a confirmation mes-

sage.

DVD-RAM(VR), DVD-RW(VR mode) : Since

Playlist is present, the message 'Do you want to

delete? (Related playlists may be deleted.)' is dis-

played.

(VR mode)

1 Press the TITLE LiST button.

The Title List screen is displayed.

Or use the MENU button.

,, Press the MENU button.

,, Press the AT buttons to select Title List, then

press the ENTER or I_ button twice.

English - 73

Press the AT buttons to select a title you want to

delete from the Title List, then press the ENTER

or _ button.

Press the ENTER button at the end point.

The image and end point time are displayed in the

Section deletion ending point window.

Press the AT buttons to select Edit, then press

the ENTER or _- button.

The Edit Title List screen is displayed.

Press the _11_buttons to select Delete, then

press the ENTER button.

Press the ENTER button at the starting point.

The image and starting point time are displayed in

the section deletion starting point window.

Edit Title List Screen Elements

i'i i !iiiiiill

iiiiiiiiiiiiiiiii_!!i!i!i!i!i!i!i!!i_'_;_;i';i'iiiiii

1 Playback bar

2 Playtime

3 Section deletion starting point window and time

4 Section deletion end point window and time

,, Select the start and end points of the section

you want to delete using the playback related

buttons.

,, Playback related buttons: (_11,1441,441,1_1_).

Press the 4 I_ buttons to select Yes, then press

the ENTER button.

The selected section has been deleted.

To return to the Title List screen, press the _11_

buttons to select Return.

The length of the section to be deleted must

be at least 5 seconds long.

If the length of the section to be deleted is

less than 5 seconds, you will be prompted

with the message 'The range is too short.'.

If the end time precedes the starting time,

you will be prompted with the message 'End

point cannot be marked earlier than start

point.'.

i The section cannot be deleted when it

includes a still picture.

Press the MENU button after the operation

has finished.

The Title List screen will disappear.

74 = English

| Editing a Chapter

You can make your own chapters on DVD+RWs and

edit them using the Chapter Edit menu.

Chapter Edit Screen Elements

Press the TITLE LiST button.

The Title List screen is displayed.

Or use the MENU button.

,,Press the MENU button.

,,Press the AT buttons to select Title List, then

press the ENTER or _ button twice.

1. Current chapter number and status

2. Playback bar

3. Playtime

4. Chapter Edit menu

Press the AT buttons to select a title containing a

chapter you want to edit, then press the ENTER

or _ button.

Select the point where you want to add a chapter

using the playback related buttons, then press the

ENTER button at that point.

Each time you press the ENTER button, a new

chapter will be added.

Press the AT buttons to select Chapter Edit,

then press the ENTER or b- button.

The Chapter Edit screen is displayed.

" Playback related buttons: (_1U4141,1_1,_,1_.

Press the _1 _ buttons to select Return, and then

press the ENTER button.

The edited title will now have the chapter you

added.

i You can make up to 99 chapters in a title and

254 chapters in a disc.

i The edited chapters are shown on existing

DVD players only after performing the Edit

Compatible function. (See page 89)

i If you add a chapter, the title is divided at that

point; If you add a chapter onto a title that has

only one chapter, it creates another chapter.

iii:

iiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

English = 75

Select a chapter you want to delete using the

playback related buttons.

Press the _1 _ buttons to select Hidden, and then

press the ENTER button.

The selected chapter is hidden.

,, To finish the operation, select Return using the

_1D,-buttons then press the ENTER button.

" Playback related buttons: (_HI_I._,_,_L._,,q,_,,-).

Press the _1 _- buttons to select Delete, and then

press the ENTER button.

The selected chapter will be deleted.

If there is only one chapter, it can't be hidden.

Hidden/Show menu is not available if there is

one chapter in the selected title.

The hidden chapters are not shown on the

existing DVD players.

i Hidden menu is changed to Show with a

chapter playing back. You can make the hid-

den chapter shown by pressing the ENTER

button at Show menu.

ii i !iiiiiill

iiiiiiiiiiiiiiiii_!!i!i!i!i!i!i!i!!i_;;_i'_i'iiiiii

" To finish the operation, select Return using the

_ buttons then press the ENTER button.

m First chapter can't be deleted.

Delete menu is not available if there is one

/.ot_ chapter in the selected title.

i When deleting a chapter, only the chapter marker

is actually deleted, not the recorded video.

i Deleting a chapter can't be canceled.

Select a chapter you want to hide using the

playback related buttons.

Press the _11_ buttons to select Delete All, and

then press the ENTER button.

Press the _1 _ buttons to select Yes, and then

press the ENTER button.

i When deleting a chapter, only the chapter

marker is actually deleted, not the recorded

i,oi{,

video.

Delete AIJ menu is not available if there is one

chapter in the selected title.

,, Playback related buttons: (D,.11.144,_,-},,4,_1,_1,_,,-_,,-).

76- English

| Dividing a Title

Follow these instructions to divide a long title into

several titles.

Select the point you want to divide using the

playback related buttons, then press the ENTER

button.

Press the TITLE LIST button.

The Title List screen is displayed.

Or use the MENU button.

,, Press the MENU button.

,, Press the AT buttons to select Title List, then

press the ENTER or I_ button twice.

', Playback related buttons: (_IU._I,_I,_I_I,I_I-.).

Press the _11_ buttons to select Divide, then

press the ENTER button.

Press the AT buttons to select a title you want to

divide from the Title List, then press the ENTER or

I_ button.

Press the _11_ buttons to select Yes, then press

the ENTER button.

The selected title has been divided into two titles.

Press the AT buttons to select Divide Title, then

press the ENTER or _ button.

The Divide Title List screen is displayed.

i If the point length to be divided is less than 5

seconds, you will be prompted with the mes-

sage 'The range is too short.'.

Press the MENU button after the operation

has finished.

The Title List screen will disappear.

iii:

i i i iiiii!i iiiiiiiiiiiiiiiiiiiill

iiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii;;;

English = 77

Press the ENTER button at the end point.

| Creating a Playlist

Follow these instructions to create a |

new playlist title from a recorded title.

(VR mode)

With the unit in Stop mode, press the MENU

button.

Press the AT buttons to select Playlist, then

press the ENTER or I_ button.

Press the AT buttons to select New Playiist,

then press the ENTER or _ button.

The Make Scene screen is displayed.

The image and end point time are displayed in

the End window.

The yellow-colored selection bar moves to the

Make icon.

- To make a new playlist -

Press the 4 I_ buttons to select Make, then press

the ENTER button.

A new Scene will be added to the current Playlist.

A new Make Scene screen is displayed.

You can check and see all the scenes on

Edit Playlist screen.

Repeat steps 1-6 if you want to make a new

playlist.

i Repeat steps 4-6 if you want to add scenes

to the playlist.

ii i !iiiiiill

iiiiiiiiiiiiiiiii_!!i!i!i!i!i!i!i!!i_'_;_;i';i'iiiiii

Press the ENTER button at the start point.

• The image and time at the start point are dis-

played on the Start window.

,, The yellow-colored selection bar moves to the

End item.

• Select the starting point of the section from

which you want to create a new scene using the

playback related buttons (b-ii,l_,l_,l,_,l_,_.

- To return to Edit Playlist menu -

Press the AT buttons to select Return, then

press the ENTER button.

The Edit Playlist screen is displayed.

Press the MENU or PLAY LiST button after the

operation has finished.

The Edit Playlist screen will disappear.

i You can create up to 99 playlist titles.

i Depending on the kind of disc, the displayed

screen may have a slight difference.

78 = English

| Playing Titles in the Playlist

Follow these instructions to play the playlist titles.

(VR mode)

Press the PLAY LiST button with the disc stopped.

The Edit Playlist screen is displayed.

Or use the MENU button.

,, Press the MENU button with the disc stopped.

,, Press the AT buttons to select Playlist, then

press the ENTER or _ button.

,, Press the AT buttons to select Edit Playlist,

then press the ENTER or I_ button.

Press the STOP button to stop playing.

The screen returns to the Edit Playlist screen.

| Renaming a Playlist Title

Follow these instructions to rename a playlist title, i.e.

to edit the title of a playlist title.

(VR mode)

Press the PLAY LiST button with the disc stopped.

The Edit Playlist screen is displayed.

Or use the MENU button.

,, Press the MENU button with the disc stopped.

,, Press the AT buttons to select Playlist, then

press the ENTER or _ button.

,, Press the AT buttons to select Edit Playlist,

then press the ENTER or I_ button.

Press the AT buttons to select the title you want

to play from the Playlist, then press the ENTER or

button.

The Edit Playlist menu is displayed : Play,

Rename, Edit Scene, Copy, Delete.

Press the AT buttons to select Play, then press

the ENTER or _ button.

The playlist titles will be played back.

Press the AT buttons to select the title you want

to rename from the Playlist, then press the

ENTER or _ button.

The Edit menu is displayed : Play, Rename, Edit

Scene, Copy, Delete

iii:

iiiiiiiiiiiiiiiiiiiiiiiiiii_

iiiiiiiiiiiiiiiiiiiiiiiiiiiii_

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_

English = 79

Press the AT buttons to select Rename, then

press the ENTER or D,,button.

The Rename screen is displayed.

Enter the desired characters using the AT _1

buttons.

| Editing a Scene for the Playlist

Follow these instructions to edit scenes for a playlist.

(VR mode)

Press the PLAY LiST button with the disc stopped.

The Edit Playlist screen is displayed.

Or use the MENU button.

,, Press the MENU button with the disc stopped.

,, Press the AT buttons to select Playlist, then

press the ENTER or m,,button.

,, Press the AT buttons to select Edit Playlist,

then press the ENTER or D,-button.

,, This function is the same as the Rename

function in renaming the title list. (See page 71 .)

,, The maximum number of characters that can be

entered is 31.

Press the AT _1 _- buttons to select Save, then

press the ENTER button.

The changed title is displayed in the title field of

the selected title.

Press the AT buttons to select the title you want

to edit from the Playlist, and then press the

ENTER or _- button.

The Edit Playlist menu is displayed: Play,

Rename, Edit Scene, Copy, Delete

ii i !iiiiiill

iiiiiiiiiiiiiiiii_!!i!i!i!i!i!i!i!!i_'_;_i'_i'iiiiii

Press the AT buttons to select Edit Scene, then

press the ENTER or _ button.

The Edit Scene screen is displayed.

80- English

Press the J, Y4 I) buttons to select the scene

you want to play, then press the ENTER button.

The playlist title to be played is selected.

Press the ENTER button at the start point of the

scene.

Press the ENTER button.

The selected scene will be played back.

,, The image and starting point time are displayed

on the Start window.

,, Select the starting or ending point of the section

you want to modify using the playback related

buttons (1_11,1_41,_1_1,441,1_I_).

Press the ENTER button at the end point of the

scene.

,, To stop scene play, press the STOP button.

,, The image and ending point time are displayed

in the End window.

Press the J,Y 4 I_ buttons to select the scene

you want to modify, then press the ENTER button.

Press the 411_buttons to select Change, then

press the ENTER button.

Press the AT buttons to select Modify, then

press the ENTER button.

The Modify Scene screen is displayed.

,, The scene you want to modify is changed with

the selected section.

iii:

iiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

English = 81

Press the AT _11_buttons to select the scene you

want to move (change the position), then press the

ENTER button.

Press the AT 4 I_ buttons to select the scene

that will have a new scene inserted before it, then

press the ENTER button.

A yellow selection window is displayed on the

scene to be added as the new scene.

Press the AT buttons to select Move, then press the

ENTER button.

Press the AT buttons to select Add, then press

the ENTER button.

The Add Scene screen is displayed.

,* Ayellow selection window is displayed on the

scene to be moved.

Press the AT 4 I_ buttons to select the position to

which you want to move the selected scene, then

select the ENTER button.

,* The selected scene is moved to the selected

position.

Press the ENTER button at the starting point of

the scene.

ii i !iiiiiill

iiiiiiiiiiii%!i!i!i!i!!i_'_;_i'_i'i_iiiiii

a Depending on the kind of disc, the displayed

,;>_ screen may have a slight difference.

82- English

,, The image and starting point time are displayed

in the Start window.

,, Select the end point of the section where you

want to add the new scene using the playback

related buttons (1_11,1_,_1,_-1_1,4_1,1_1_).

PresstheENTERbuttonattheendpointofthe

scene.

,,Theimageandtimeoftheendpointare

displayedintheEndwindow.

,,Tocancel,pressthe_1_ buttonstoselect

cancelandthenpresstheENTERbutton.

PresstheAT buttonstoselectAdd,thenpress

theENTERbutton.

| Copying a Playlist Title to the VCR

Press the PLAY LIST button with the disc stopped.

The Edit Playlist screen is displayed.

Or use the MENU button.

* Press the MENU button with the disc stopped.

* Press the AT buttons to select Playlist, then

press the ENTER or b.- button.

,, Press the AT buttons to select Edit Playlist,

then press the ENTER or I_ button.

• The section you want to add is inserted prior to

the scene selected in step 4.

Press the AT buttons to select the title you want

to copy to the VCR, and then press the ENTER or

I_ button.

The Edit Playlist menu is displayed: Play,

Rename, Edit Scene, Copy, Delete.

Press the AT 4 I_ buttons to select the scene

you want to delete, and then press the ENTER

button.

Press the AT buttons to select Delete, then

press the ENTER button.

Press the AT buttons to select Copy, then press

the ENTER button.

,, The title you choose is played and copied to

VCR tape.

iii:

iiiiiiiiiiiiiiiiiiiiiiiiiii_

iiiiiiiiiiiiiiiiiiiiiiiiiiiii_

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_

Press the MENU button after the operation has

finished. The menu screen will disappear.

i The playlist can contain up to 99 playlist

titles.

English = 83

| Deleting a Playlist Title from the

Playlist

Press the PLAY LiST button with the disc stopped.

The Edit Playlist screen is displayed.

Or use the MENU button.

,, Press the MENU button with the disc stopped.

,, Press the AT buttons to select Playlist, then

press the ENTER or _ button.

,, Press the AT buttons to select Edit Playlist,

then press the ENTER or t,- button.

Press the _1_ buttons to select Yes, then press

the ENTER button.

It automatically returned to the Edit Playlist screen

after the delete operation has finished.

Press the AT buttons to select the title you want

to delete from the Playlist, then press the ENTER

or t,- button.

The Edit Playlist menu is displayed: Play,

Rename, Edit Scene, Copy, Delete

| Editing the Disc Name

Follow these instructions to give a name to a disc.

ii_i_!iiiiiill

iiiiiiiiiiiiiiiii_!!i!i!i!i!i!i!i!!i_'_;_;i';i'iiiiii

Press the AT buttons to select Delete, then

press the ENTER button.

,, You will be prompted with the delete confirmation

message 'Do you want to delete?'.

With the unit in Stop mode, press the MENU

button.

84 = English

Press the AT buttons to select Disc Manager,

then press the ENTER or _- button.

| Disc Protection

Disc Protect allows you to protect your discs from being

formatted or deleted due to unintended operations.

With the unit in Stop mode, press the MENIJ

button.

Press the AT buttons to select Disc Name, then

press the ENTER or I_ button.

The Edit Name screen is displayed.

Press the AT buttons to select Disc Manager,

then press the ENTER or _, button.

Enter the desired characters using the AT _1 _,

buttons.

• This function is the same as the Rename

function in renaming the title list. (See page 71 .)

• The maximum number of characters that can be

entered is 31.

Press the AT _1 m,,buttons to select Save, then

press the ENTER button.

A disc name is given to the disc.

Press the AT buttons to select Disc Protection,

then press the ENTER or _, button.

Press the AT button to select Protected, then

press the ENTER or _- button.

iii:

iTiiiii!i iiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

i You may need to clear disc protection before

beginning editing. (see page 85)

i Depending on the kind of disc, the displayed

screen may be different.

English = 85

| Formatting a Disc

Use these instructions to format a disc. Clear disc

protection before formatting. _,_:_®

J':;_J'S/_?_"J

With the unit in Stop mode, press the MENU

button.

DVD-RW

', You will be prompted with the confirmation

message 'Choose the recording format for

DVD-RW.'

Press the AT buttons to select Disc Manager,

then press the ENTER or I_ button.

Press the 4 I_ buttons to select Yes, then press

the ENTER button. The disc is formatted.

DVD-VR and DVD-V modes are compatible

with the following disc types,

DVD-VR DVD-V

DVD-RAM DVD-RW

DISC

DVD-RW DVD-R

Press the AT buttons to select Disc Format,

then press the ENTER or I_ button.

| Finalizing a disc

After you record titles onto a DVD-RW/DVD_+R disc with

your DVD Recorder & VCR, it needs to be finalized

before it can be played back on external devices.

ii i !iiiiiill

iiiiiiiiiiii;iiii_!!i!i!i!i!i!i!i!!i_';;_;i';i'iiiiii

DVD-RAM/+RW

" You will be prompted with the confirmation

message 'Do you want to format disc?'.

With the unit in Stop mode, press the MENU

button.

,, You will be prompted with the confirmation

message 'All data will be deleted. Do you want

to continue?'.

86 = English

Press the AT buttons to select Disc Manager,

then press the ENTER or _ button.

Press the _ _ buttons to select Yes, then press the

ENTER button.

The disc is finalized.

Press the AT button to select Disc Finalize, then

press the ENTER or _- button.

}L,0

Once a disc is finalized, you cannot delete

titles from the record list.

i Once a DVD_+R/DVD-RW (video mode)disc

is finalized, it is playable in a standard DVD

player.

i Depending on the disc type, the displayed

screen may be different.

i Finalizing time may be different depending

on the amount of data recorded on the disc.

Data on the disc will be damaged if the

recorder is powered off during finalize

process.

| Unfinalizing a disc (V/VR mode)

With the unit in Stop mode, press the MENU

button.

You will be prompted with the message 'Do you

want to finalize disc?'.

If you select Yes, you will be prompted again with

the message 'Disc will be finalized. Do you want

to continue?'

Press the AT buttons to select Disc Manager,

then press the ENTER or D,-button.

iii:

iiiiiiiiiiiiiiiiiiiiiiiiiii_

iiiiiiiiiiiiiiiiiiiiiiiiiiiii_

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_

English = 87

Press the AT button to select Disc Unfinalize,

then press the ENTER or _- button.

You will be prompted with the message 'Do you

want to unfinalize disc?'.

| Delete Aii Title Lists

! f&_s

With the unit in Stop mode, press the MENU

button.

If you select Yes, you will be prompted again with

the message 'Disc will be unfinalized. Do you

want to continue?'

Press the AT buttons to select Disc Manager,

then press the ENTER or _, button.

Press the 4 _, buttons to select Yes, then press

the ENTER button.

The disc is unfinalized.

m A DVD-RW can be finalized or unfinalized in

/,rt, Video mode.

Finalize Unfinalize

Mark DVD-Video(RW) DVD-RW(V)

Additionalrecording,protection

OperationSameasDVD-Video anddeletionarepossble.

m A DVD-RW can be finalized or unfinalized in

VR mode.

Finalize Unfinalize

Mark DVD-RW(VR:F) DVD-RW(VR)

Additionalrecording, Additionalrecording,

Operation deletion,editing,and deletion,editing,and

protectionareimpossble, protectionarepossble.

Press the AT button to select Delete All Title

Lists, then press the ENTER or _, button.

ii i !iiiiiill

iiiiiiiiiiiiiiiii_!!i!i!i!i!i!i!i!!i_'_;_;niiliii

,,You will be prompted with the confirmation mes-

sage 'Do you want to delete all title lists?'.

88 = English

', When Protected Title exists: The Delete All Title

List function will not operate. If there is a title

containing a still picture, however, that function

will not operate.

If you want to delete a protected title, disable

Protect for it on the Lock item.

Press the AT buttons to select Edit Compatible,

then press the ENTER or t, button.

Press the 4 I_ buttons to select Yes, then press

the ENTER button.

All title lists are deleted.

| Edit Compatible

For DVD+RW discs, this function needs to be performed

in order to view edited chapters or titles on a standard

DVD player.

With the unit in Stop mode, press the MENU

button.

,, You will be prompted with the confirmation mes-

sage 'Do you want to execute Edit compatible?

This may take more than an hour depending on

the configuration.'.

Press the 4 _- buttons to select Yes then press

the ENTER button to execute the edit compatible.

After performing this function, you can go to

TITLE MENU screen directly by pressing the

TITLE MENU button.

Press the AT buttons to select Disc Manager,

then press the ENTER or t,- button.

iii:

iiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

English - 89

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii'_!,!,!,!,!,!,!,i

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i_i_i_i_i_i_i_i

90- English

if your product malfunctions, go through the check points below before contacting a Samsung authorized ser-

vice center,

Problem Explanation/Solution

No power.

, Check whether the power cord is securely plugged into the power outlet.

, Did you press the power button of your DVD Recorder & VCR.

The input is displayed , The DVD Recorder & VCR requires some time to initialize after it is turned on.

for a while when the If Quick recording function is set to on, the DVD Recorder & VCR will power on quickly,

power turns on. which enables you to immediately record a desired channel. (See page 41 .)

Cannot record TV

programs.

, Check whether the power cord is securely plugged into the power outlet.

, Did you set the DVD Recorder & VCR channel settings correctly?

, Check the free space on your DVD-RAM/DVD_+RW/DVD_+R disc.

, Check the antenna cable is connected.

Timer recording does , Check the recording time, end time and current time settings again.

not work properly. , Recording will be cancelled if the power is interrupted due to a power

failure or other reason during recording.

Cannot record,

, Check whether the disc is formatted. This product can record on

formatted discs only. (See page 86.)

, Check whether your DVD-RAM/DVD_+RW/DVD_+R disc has a sufficient free space.

I pressed the REC

button but there is

no response.

, Recording is available on DVD-RAM/DVD_+RW/DVD_+R discs only.

, If a program is copy protected, you cannot record it.

I forget the password

for parental lock.

, Press and hold the CH (A/V) button on the front panel of your unit for more than 5

seconds with no disc, and then press the POWER OFF/ON button. All settings including

password will revert to factory settings. Do not use it if not absolutely required.

(Note that this function is available only when there is no disc inserted.)

Cannot play the disc. , Check whether the disc is inserted correctly with the label facing up.

, Check the regional code of your DVD disc.

, This DVD Recorder & VCR cannot playback some types of disc. (See page 5.)

No sound.

, Are you watching a program in slow or skip mode?

If you are playing a program at a speed other than normal speed, sound

is not output. (Except for forward search Playback (Fast1))

, Check the connections and initial settings.

, Check whether the disc is damaged.

Clean up the disc, if necessary.

, Check whether the disc is inserted correctly with the label facing up.

iiiiiiii !!ii!ii!ii!ii!ii!ii!ii!

iiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

English - 91

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii'_!,!,!,!,!,!,!,i

iiiiiiiiiiiiiiii_iiiiiii_i

Problem Explanation/Solution

(?)icon appears on

the screen.

You cannot use the operation or function due to one of the following reasons:

(1) Your DVD disc does not support the feature (for example, angles)

(2) You've requested a title, chapter, or scan time that is out of the correct range.

Play mode settings are

different from the set-

tings configured with

the Setting menu.

The disc does not support all the selected functions.

In this case, some settings you configure on the Setting menu may not work properly.

Cannot change the

aspect ratio.

Aspect ratio is fixed for DVD disc.

No audio output.

Check whether you selected correct digital output options in the Audio Output Options menu.

No video or audio output. Did you move your DVD Recorder & VCR suddenly from a cold place to a warm place?

The disc tray is ejected In this case, do not connect the plug to the power outlet and wait for two hours. Then insert

after 2 to 5 seconds, the disc and try to play back again. It will work properly when condensation has evaporated.

Angle operationdoes not Angle operation is available only when the disc contains images captured at different

work duringplayback of a angles.

DVDdisc.

The disc revolves, but

no image or bad quali-

ty images are output.

,, Check whether there is damage or foreign materials on your disc.

,, Some discs with bad manufacturing quality may not be played back.

,, If the scene changes from dark to bright suddenly, the screen may jitter temporarily,

but it is not a defect.

Desired sound

language and

subtitle language are

not played.

No progressive

output.

Sound languages and subtitle languages are disc-specific.

Only the sound and subtitle languages contained on a DVD disc are available and displayed

on the disc menu.

,, Check whether PSO is displayed on front panel.

,, Make sure to change the component video output using the Progressive button when the

disc is stopped.

The remote control

doesn't work.

,, Point the remote control at the remote control sensor on your DVD Recorder & VCR.

Operate within distance. (15ft)

Remove obstacles between your DVD Recorder & VCR and remote control.

• Check whether the batteries are depleted.

Samsung DVDVR330 dvd/vcr

Product's Documents

User Manual

Specifications

Samsung DVDVR330 Questions and Answers

Related Products

Samsung DVD-V5500 dvd/vcr

Samsung DVD-V2500 dvd/vcr

Samsung DVD-V2000 dvd/vcr

Samsung DVD-V4800 dvd/vcr

Samsung DVD-V3500/XAA Progressive DVD/VCR Player