Loading ...
Loading ...
Loading ...
42
78D0011
WDV Series Gas Fireplace
The replace and venting system should be inspected
before initial use and at least annually by a qualied eld
service person. Inspect the external vent cap on a regular
basis to make sure that no debris is interfering with the
airow. Inspect entire venting system to ensure proper
function.
Thoroughly clean the inside of the glass door after using
the replace for two hours. Periodically clean the glass
door as necessary.
When cleaning the glass, remember:
• Allow glass to
cool before removal.
• NEVER use abrasive materials.
• Keep children and pets a safe distance away.
• Never operate the replace without the glass door
properly secured.
• Never operate the replace if the glass is broken.
• Replace any glass that is chipped, cracked, or broken.
Replacement glass door assemblies MUST be supplied
by the replace manufacturer –
• Handle glass door with care to avoid striking or scratch-
ing it on hard objects.
To clean glass door, follow “Glass Removal” procedure
outlined in the Final Installation section. Film deposit on the
inside of the glass should be cleaned off using a nontoxic,
non-corrosive, non-abrasive, mild-cleaning solution. Simply
apply an adequate amount to the glass and wipe off with
a damp cloth. After all maintenance has been completed,
re-install glass door.
Vacuum surface of the stones with a brush attachment. If
stones must be removed for cleaning, handle carefully by
holding gently at each end. Gloves are recommended to
prevent skin irritation from ceramic bers. If skin becomes
irritated, wash gently with soap and water. Vacuum surface
of stones with brush attachment or brush logs with a soft
bristly (i.e. clean, dry paintbrush). To place stones in the
replace, refer to Stone Placement section on Page 29.
Do not use uids to clean ceramic ber stones.
Loading ...
Loading ...
Loading ...