Loading ...
Loading ...
Loading ...
78D0011
29
WDV Series Gas Fireplace
1. For best results, spread glass evenly over the entire oor
and burner making sure the glass is not too heavy over
the burner ports (single layer only). Keep rear vent area
open to allow air to circulate under the stones. Figure
39
2. Place the stones randomly in front of and behind the
burner ports.
Figure 39
3. Turn burner on and adjust glass over the ported area
to achieve an even, clean ame. Page 41, Figure 56
4. Replace glass frame and access door in reverse order
of removal.
Figure 39 -
Stone Placement
Firebox Perimeter
Burner Surface
Rear Vent
FP2434
Example of Stone
Placement
Two (2) bags of glass are supplied with the 500
Series replaces. Both bags should be used to cover the
entire oor and burner. Three (3) bags of glass are supplied
with the 600 Series replaces. It is not necessary to use
the entire 3rd bag of glass provided. Too much glass can
cut off the proper amount of air the burner needs to burn
clean. This may cause sooting.
1. Spread glass evenly in one layer over the entire oor
and burner. It is important to not have the glass too
heavy on ported area (single layer only). Keep rear vent
area open to allow air to circulate for a clean ame and
appearance.
2. Turn burner on and adjust glass over ported areas to
achieve an clean ame.
3. Replace glass frame and access door in reverse order
of removal.
Loading ...
Loading ...
Loading ...