Loading ...
Loading ...
Loading ...
Troubleshooting
Problem
Unit fails to propel itself
Unit fails to discharge
snow
Cause
1. Auger control cable out of
adjustment.
2. Drive belt loose or damaged.
1. Chute assembly clogged
2. Shear pins sheared
3. Foreign object lodged in auger.
4. Auger control cable in need of
adjustment,
5. Auger belt loose or damaged.
Remedy
1. Adjust drive control cable.
Refer to Adjustments and
Maintenance Section,
2. Replace drive belt. Refer to the
Adjustments and Maintenance
1. Stop engine and disconnect
spark plug wire. Clean chute
and inside of auger housing
with clean-out tool or a stick.
2. Replace shear pins.
3. Stop engine immediately and
disconnect spark plug wire.
Remove object from auger.
4. Adjust auger control cable.
Refer to Adjustments and
Maintenance Section.
5. Refer to Maintenance Section.
17
Loading ...
Loading ...