Loading ...
Loading ...
Loading ...
Troubleshooting
Problem Cause
Engine fails to start
Engine runs erratic
Loss of power
Excessive vibration
1. Fuel tank empty, or stale fuel.
2. Blocked fuel line
3. Key not inserted all the way
4. Spark plug wire disconnected.
5. Faulty spark plug
6. Primer button not being used
properly.
1. Unit running on CHOKE
2. Blocked fuel line or stale fuel
3. Water or dirt in the fuel system
1. Spark plug wire loose
2. Gas cap vent hole plugged
1. Loose parts or damaged auger.
Remedy
1. Fill tank with clean, fresh
gasoline. Fuel becomes stale
after thirty days.
2. Clean the fuel line.
3. Insert key all the way
4. Connect spark plug wire
5. Clean spark plug, readjust gap
or replace.
1. Move the Choke Control to RUN.
2. Clean the fuel line; fill the tank
with clean fresh gasoline.
3. Drain the fuel tank and
carburetor. Refill with fresh fuel.
1. Connect and tighten spark plug
wire.
2. Remove ice and snow from
gas cap. Be certain vent hole
is clear.
1. Stop the engine immediately
and disconnect the spark plug
wire. Tighten all bolts and
nuts. If vibration continues,
have the unit serviced by an
authorized service dealer.
16
Loading ...
Loading ...
Loading ...