Loading ...
Loading ...
Loading ...
English - 12
CAUTION
When moving your refrigerator
To prevent floor damage, be sure the front
adjusting legs are in the up position (above the
floor).
Refer to ‘Adjusting the Level’ on page 17.
Flat-blade screw
driver (-)
Control Lever
Flooring
For proper installation, you must place this
refrigerator on a level, hard surface that is the
same height as the rest of the floor.
This surface should be strong enough to support a
fully loaded refrigerator.
To protect the finish of the flooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working.
When moving the refrigerator, you need to pull and
push it straight forwards or back.
Do not wiggle it from side to side.
REMOVING THE REFRIGERATOR
DOORS
For some installations, you need to remove the
fridge and freezer drawers so you can move the
refrigerator to its final location.
Do not remove the doors/drawer if you don’t
need to.
If you do not need to remove the refrigerator doors
or drawers, go to ‘Leveling the Refrigerator’ on
page 17. If you need to remove the doors and
drawers. continue below.
Before removing the doors or drawers, make sure
you read the following warnings:
WARNING
Disconnect power to the refrigerator before
removing the door or drawer.
• Be careful not to drop, damage
or scratch the door / drawer while
removing them.
• Be careful not to injure yourself while removing
the doors/drawer.
• Reattach the door/drawer properly to avoid:
- Moisture from air leakage.
- Uneven door alignment.
- Wasting energy due to improper door seal.
DA68-03055A-08.indb 12 2016. 3. 30. �� 2:44
Loading ...
Loading ...
Loading ...