Loading ...
Loading ...
Loading ...
7
ASSEMBLY INSTRUCTIONS
Place the Strainer (Fine or Coarse) inside the
Spinning Brush. Push the Strainer into the Spinning
Brush until the edges properly align and the Strainer
easily rotates within the Spinning Brush.
Lower the Spinning Brush with Strainer attachment
into the Chamber. Place the Spinning Brush inside
the Chamber so that the Red Dots are properly
aligned. Do not force the Spinning Brush downward
during assembly.
Place the Auger directly in the middle of the Strainer
attachment and carefully rotate the Auger clockwise
until it is properly secured and aligned.
Ensure that the Juicer power switch is set to the
OFF position. Place the Hopper on top the Chamber
with OPEN aligned with the arrow on the Chamber.
Rotate the Hopper clockwise until CLOSE is aligned
with the arrow on the Chamber and the Hopper is
locked into place.
Place the Chamber onto the
Base ensuring that the arrow on
the back of the Hopper is aligned
with the arrow on the base.
The Chamber must be properly
sealed and aligned on the Base
to function.
1
2
4
3
5
Assembly Instructions
Hopper
Base
Back of the Hopper
Strainer
Chamber
Both the Strainer
and Chamber
have Red Dots which
indicate proper alignment.
1
2
4
3
5
Loading ...
Loading ...
Loading ...