Loading ...
Loading ...
Loading ...
o Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending upon how often you do this
type of work. To reduce your exposure to these chemicals:
= Work in a well-ventilated area.
o Work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
Avoid prolonged contact with dust from power sanding, sawing, grinding,
drilling, and other construction activities. Wear protective clothing and wash
exposed areas with soap and water.
Allowing dust to get into your mouth or eyes or to tie on the skin may promote
absorption of harmful chemicals.
WARNING: The operation of any power tool can result in foreign objects be-
ing thrown into your eyes, which can result in severe eye damage. Before begin-
ning power-toot operation, always wear safety goggles or safety glasses with side
shields, and a full face shield when needed. We recommend Wide Vision Safety
Mask for use over eyeglasses or standard safety glasses with shields. Always use
eye protection which is marked to comply with ANSI Z87.1
In
2_
3_
Stay alert, watch what you are doing and use common sense when op-
erating a power tool, Do not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry or tong hair can be
caught in moving parts.
Avoid accidental starting, Ensure the switch is in the off position before
plugging in. Carrying power tools with your finger on the switch or plugging in
power tools that have the switch on invites accidents.
4o Remove adjusting keys or switches before turning the tool on. A wrench or a
key that is left attached to a rotating part of the tool may result in personal injury.
5. Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power toot in unexpected situations.
.
.
8.
Use safety equipment. Always wear eye protection. Safety equipment such
as dust masks, non-skid safety shoes, hard hat or hearing protection used for
appropriate conditions will reduce personal injurie&
Wear hearing protection to help prevent hearing loss.
Never touch the pins of the electrical plug while inserting it into or removing it
from an electrical socket.
TOOL USE AND CARE SAFETY
_k WARNING: Use of accessories that are not recommended for use with this
tool may create hazardous conditions.
28191 Manua! Revised 07-0202 Page 8
Loading ...
Loading ...
Loading ...