Loading ...
Loading ...
Loading ...
WARNING: The safe use of this product requires an understanding of the
information on the tool and in this product manual, as well as knowledge of the
project you are attempting° Before use of this product, familiarize yourself with all
operating features and safety rules.
0 ° TO 48 ° Bevel Adjustment
The bevel-adjustment lever allows you to set the trim saw for bevel cuts from 0° to
48°
LASERTRAC TM Laser Guide
The laser guide projects a bright red line onto the workpiece, aiding in alignment
and accuracy.
LED Worklight
The fixed-position LED worklight, located on the front of the saw, allows better cut-
line visibility.
Edge Guide
The saw is equipped with an edge guide for accurate parallel cuts.
Spindle-Lock Button
The spindle-lock button allows you to secure the blade when turning the blade
screw.
Depth-of-Cut Adjustment Lever
The depth-of-cut adjustment lever adjusts the depth of cut a maximum of 0 to
1 5i8qn. at 90° and 0 to 1 1/164n. at 45 °.
WARNING: If any parts are broken or missing, DO NOT attempt to plug in
the power cord or operate the saw until the broken or missing parts are replaced.
Failure to do so could result in possible serious injury.
Z_ WARNING: Do not attempt to modify this saw or create accessories not
recommended for use with this saw° Any such alteration or modification is misuse
and could result in a hazardous condition leading to possible serious injury.
WARNING: To prevent accidental starting that could cause serious personal
injury, always disconnect the tool from the power source when assembling parts.
UNPACKING
This product has been shipped completely assembled.
1. Carefully remove the too! and the accessories from the box. Make sure that all
items listed in the packing list are included.
2. Inspect the tool carefully to make sure that no breakage or damage occurred
during shipping.
28191 ManuaLRevised_07©202 Page 15
Loading ...
Loading ...
Loading ...