NuWave 20803 Bravo XL 1 Cu. Ft. Air Fryer Toaster Oven

OWNER’S MANUAL - Page 27

For 20803. Also, The document are for others NuWave models: 20801

PDF File Manual, 32 pages, Read Online | Download pdf file

20803 photo
Loading ...
Loading ...
Loading ...
nuwavenow.com | 27
TROUBLESHOOTING GUIDE
REPLACING THE LIGHT BULB
Error Message: Solution(s):
Prb1 Probe not connected to the unit. Plug the Probe into the Bravo.
Prb2
The Probe target internal temperature is set higher than set cooking
temperature.
Prb3 Probe Short Circuit. Contact Customer Service
Prb4
Probe sensor not detecting temperature increase. Ensure the Probe
is inserted into the food and the food is in oven during cooking.
Er1
NTC Temperature Sensor overheated. Turn unit off to cool. If the
Bravo is not working after it cools down, contact Customer Service.
Err1 NTC Temperature Sensor short circuit. Contact Customer Service.
Err2 NTC Temperature Sensor is open. Contact Customer Service.
Err8 A button may be jammed. Contact Customer Service.
For further assistance, please contact NuWave’s Customer Service Department at
1-877-689-2838 (Mon–Fri 7:30am–4:30pm CST), or at
help@nuwavenow.com
.
Replacing the Light Bulb
1. Unscrew the light bulb cover turning counter-clockwise (turning to left).
2. Then unscrew the light bulb turning counter-clockwise(turning to left).
3. With the replacement bulb, screw turning clockwise (turning to the right) until tightened.
4. Then screw in the light bulb cover clockwise (turning to the right).
Loading ...
Loading ...
Loading ...