Loading ...
Loading ...
Loading ...
DS55MU01
37
Balance
Adjust to emphasize left or right audio output balance.
Treble
Adjust to increase or decrease higher-pitched sounds.
Bass
Adjust to increase or decrease lower-pitched sounds.
Volume
Adjust to increase or decrease the audio output level.
Audio out (line out)
Adjust to increase or decrease line out output level.
Maximum volume
Adjust your own limitation for the maximum volume
setting. This stops the volume from being playing at too
loud a level.
Minimum volume
Adjust your own limitation for the minimum volume
setting.
Mute
Turn the mute function on/off.
Audio source
Select the audio input source. There are no audio
output when no video signal.
Analog: audio from audio input
Digital : audio from HDMI audio.
Audio reset
Reset all settings in the Audio menu to factory preset
values.
Audio Out Sync
Enable/disable audio out (line out) volume adjustability
to sync with internal speakers.
6.2.4. Configuration1 menu
Picture
Screen
Audio
Configuration 1
Configuration 2
Advanced option
Switch on state
Panel saving
RS232 routing
Boot on source
WOL
RGB Range
Configuration1 reset
Factory reset
Force on
Action
RS232
Action
Off
Auto
Action
Action
Switch on state
Select the display status used for the next time you
connect the power cord.
• {Power off} - The display will remain off when the
power cord is connected to a wall outlet.
• {Forced on} - The display will turn on when the
power cord is connected to a wall outlet.
• {Last status} - The display will return to the
previous power status (on/off/standby) when
removing and replacing the power cord.
Panel saving
Choose to enable the panel saving functions and thus
reduce the risk of
“image persistence” or “ghost-imaging”.
• {Brightness} - Select {On} and the image
brightness will be reduced to an appropriate level.
The Brightness setting in the Picture menu will be
unavailable when selected.
• {Pixel shift} - Select the time interval ({Auto} / {10
~ 900} Seconds/ {Off}) for the display to slightly
expand the image size and shift the position of
pixels in four directions (up, down, left, or right).
Note: Only support external input source (HDMI, VGA,
DP, OPS).
RS232 Routing
Select the network control port.
Choose from: {RS232} / {LAN -> RS232} /
{CardOPSRS232 (OPS model only)}.
Boot on source
Choose to select source when boot up.
Input: select input source when boot up.
Playlist: select playlist index for Media player, Browser,
PDF player.
0: no play list. Same as switch source from OSD.1~7:
playlist number.
No failover function, system will keep source even the
source is no signal input.
WOL
Choose to turn on or off the wake on LAN function.
Choose from : {Off} / { On}
RGB Range
Manual correction gray-scale color.
Conguration1 reset
Reset all settings in Conguration1 menu to the factory
preset values.
Factory reset
Reset all settings in the OSD menus of {Picture},
{Screen}, {Audio}, {Conguration1}, {Conguration2},
and {Advanced option} to the factory preset values.
Android settings will also reset when factory reset.
Press
[
]
or
[
]
button to select {Reset}, and press
[OK] button to do the reset.
Loading ...
Loading ...
Loading ...