Loading ...
Loading ...
Loading ...
DS55MU01
9
2.4.2. ID Remote Control
You can set the remote control ID when you want
to use this remote control on one of several different
displays.
Press [ID] button. The red LED blinks twice.
1. Press [ID SET] button for more than 1 second to
enter the ID Mode. The red LED lights up.
Press the [ID SET] button again will exit the ID
Mode. The red LED lights off.
Press the digit numbers [0] ~ [9] to select the display
you want to control.
For example: press [0] and [1] for display No.1, press
[1] and [1] for display No.11.
The numbers available are from [01] ~ [255].
2. Not pressing any button within 10 seconds will
exit the ID Mode.
3. If an error pressing of buttons other than the
digits occured, wait 1 second after the red LED
lights off and then lights up again, then press the
correct digits again.
4. Press [ENTER] button to conrm. The red LED
blinks twice and then lights off.
NOTE:
• Press [NORMAL] button. The green LED
blinks twice, indicating the display is in normal
operation.
• It is necessary to set up the ID number for each
display before selecting its ID number.
Loading ...
Loading ...
Loading ...