Hitachi DS55MU01 Non-interactive Flat Panel Displays

User Manual - Page 4

For DS55MU01.

PDF File Manual, 59 pages, Download pdf file

Loading ...
Loading ...
Loading ...
DS55MU01
iv
1.1. SAFETY PRECAUTION
Note: The color and design may different by each model and the product specication are subject to change without
notice for performance enhancement.
1.1.1. Power
[Warning]
Do not use damaged power cord, plug nor loose socket. It may cause electric shock or re.
Do not connect multiple devices into a single socket. It may cause re due to overheating.
Do not touch with wet hands when remove or plug the power cord to avoid electric shock.
Insert the power plug into socket rmly. It may cause re when the connections are unstable.
Connect the power cord to a grounded wall socket. There is risk of electric shock or injury.
Do not bend nor pull the power cord and place heavy objects over the power cord. It may occur cord damage
and this may result in re.
Please clean only with dry cloth when the plug pin or socket are dusty. It may cause re.
[Caution]
Do not unplug the power plug while the product is operating. It may damage the product due to electric shock.
Only a power cord specied by product manufacturer are recommended.
Do not use the power cord from other devices. It may cause electric shock or re.
Hold the plug itself when unplugging the power plug from the wall socket. If not, there is risk of electric shock or
re.
Before moving or installing this product, be sure to turn off the power and disconnect the power cord. To turn
this product off completely, you must pull the power plug out of the wall socket. Consequently, the power plug
must be easily and readily accessible at all times.
The AC inlet and MAIN Power Switch are disconnect device, the location on the apparatus and the function of
the switch shall be described, and the switch shall remain readily operable
.
1.1.2. Installation
[Warning]
Do not install near any heat sources such as radiators, or other devices that produce heat. It may cause electric
shock or re.
When mounting a product on the wall, make sure not to install the product by hanging the power and signal
cables on the back of it.
Consult with your local dealer or specialized engineer to mount the product on the wall, and use the screws and
wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are
not covered by the warranty.
Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. If not, it may cause re.
Keep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is
harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally,
vinyl packing can cause suffocation. Keep it out of the reach of children.
Please note than the product must be supported on proper stands or installed according to the manufacturer’s
recommendations. The product that are inappropriately situated on unstable shelves, inclined planes, or vibrating
places, etc., may fall over, resulting in injury.
To reduce the risk of re or electrical shock, do not expose this product to rain, moisture or other liquids or dust.
It may cause electric shock or re.
Keep the product away from direct sunlight.
Keep the product of the reach of children and install on the stable and at place. NEVER allow children to climb
on or play on the product or the furniture and stands on which the product is placed.
Loading ...
Loading ...
Loading ...