Loading ...
Loading ...
Loading ...
Cleaning and servicing en
29
ATTENTION!
Using non-recommended descaler may damage the
appliance
▶ Only use the descaler recommended by us for the
descaling programme. The length of time for which
the descaler is left to work is based on this product.
If descaling solution comes into contact with the control
panel or other delicate surfaces, it will damage them.
▶ Remove descaling solution immediately with water.
1.
Use the function selector to select
.
a The display shows the duration of the descaling pro-
gramme. You cannot change the duration.
2.
Open the tank cover.
3.
Remove the drip tray and empty it.
4.
Slide the empty drip tray in fully.
5.
Remove the water tank.
6.
Mix water with descaler to make a descaling solu-
tion.
‒ Mix 250ml water with 50ml liquid descaler to
make a descaling solution, or dissolve a descal-
ing tablet, weight 18g, in 250ml water for
5minutes.
7.
Pour the descaling solution into the water tank and
slide the water tank in fully.
8.
Close the tank cover.
9.
Press
a The appliance is descaled.
a The remaining time counts down on the display.
a Once the descaling programme has run through to
the end, an audible signal sounds. The appliance
pauses.
10.
Open the tank cover.
11.
Remove the drip tray, empty it and slide it in.
12.
Remove the water tank, rinse it thoroughly, fill it with
fresh water and slide it in.
13.
Close the tank cover.
14.
Press
a The appliance is rinsed automatically twice. Once
the rinse cycle has run through to the end, an aud-
ible signal sounds.
Note:Observe the mixing ratio for the descaler.
Liquid descaler (order number 00311680): Mixing ratio
of 1:5, mix 50ml descaler with 250ml water.
Descaling tablets (order number 00311864): Dissolve
one descaling tablet, weight 18g, in 250ml water for
5minutes.
Rinsing
If you have not used the steam function for a long time,
rinse the appliance.
To ensure that your appliance stays clean, you can
pump water through the pipe system. The appliance
then drains the water into the drip tray.
Note:After running the rinse cycle, loosened limescale
particles may be in the collecting container. This is nor-
mal and does not affect operation.
Running the rinse cycle
1.
Use the function selector to select
.
a The display shows the programme duration. You
cannot change the programme duration.
2.
Open the tank cover.
3.
Remove the drip tray and empty it.
4.
Slide the empty drip tray in fully.
5.
Remove and empty the water tank and drain any re-
sidual water.
6.
Rinse out the water tank thoroughly and fill it with
fresh water.
7.
Slide the water tank in fully.
8.
Close the tank cover.
9.
Press
.
a Water is pumped through the pipes.
a The time remaining counts down in the display.
a An audible signal sounds once this time has
elapsed.
Subsequent cleaning
Carry out the following steps after every descaling pro-
gramme or rinse cycle.
1.
Open the tank cover.
2.
Empty, clean and dry the drip tray and water tank.
3.
Turn the function selector to the zero setting.
a The process is complete and the appliance is ready
for use.
Emptying the drip tray
With the cleaning functions, the residual water is collec-
ted in the drip tray. Then empty and dry the drip tray.
ATTENTION!
Heat may damage the drip tray.
▶ Do not dry the drip tray in the hot cooking compart-
ment.
▶ Do not clean the drip tray in the dishwasher.
1.
Briefly press on the centre of the tank cover.
a The tank cover opens. The drip tray and water tank
can now be accessed.
2.
Remove the drip tray from the tank recess.
Loading ...
Loading ...
Loading ...