Loading ...
Loading ...
Loading ...
CAUTION
•
Turn off the air condioner and disconnect the power if you are not going to use it for a long me.
•
Turn off and unplug the unit during storms.
•
Make sure that water condensaon can drain unhindered from the unit.
• Do not
operate the air condioner with wet hands. This may cause electric shock.
• Do not
use device for any other purpose than its intended use.
• Do not
climb onto or place objects on top of the outdoor unit.
•
•
Do not
allow the air condioner to operate for long periods of me with doors or windows open,
or if the humidity is very high.
ELECTRICAL WARNINGS
•
Only use the specified power cord. If the power cord is damaged, it must be replaced by the
manufacturer
, its service agent or similarly qualified persons in order to avoid a hazard.
•
Keep power plug clean. Remove any dust or grime that accumulates on or around the plug. Dirty
plugs can cause fire or electric shock.
•
•
•
•
•
•
•
Do not
pull power cord to unplug unit. Hold the plug firmly and pull it from the outlet. Pulling
directly on the cord can damage it, which can lead to fire or electric shock.
Do not
modify the length of the power supply cord or use an extension cord to power the unit.
Do not
share the electrical outlet with other appliances. Improper or insufficient power supply
can cause fire or electrical shock.
If connecng power to fixed wiring, an all-pole disconnecon device which has at least 3mm
clearances in all poles, and have a leakage current that may exceed 10mA, the residual current
device(RCD) having a rated residual operang current not exceeding 30mA, and disconnecon
must be incorporated in the fixed wiring in accordance with the wiring rules.
For all electrical work, follow all local and naonal wiring standards, regulaons, and the
Installaon Manual. Connect cables ghtly, and clamp them securely to prevent external forces
from damaging the terminal. Improper electrical connecons can overheat and cause fire, and may
also cause shock.
All electrical connecons must be made according to the Electrical Connecon
Diagram located on the panels of the indoor and outdoor units.
All wiring must be properly arranged to ensure that the control board cover can close properly. If
the control board cover is not closed properly, it can lead to corrosion and cause the connecon
points on the terminal to heat up, catch fire, or cause electrical shock.
The product must be properly grounded at the me of installaon, or electrical shock may occur.
TAKE NOTE OF FUSE SPECIFICATIONS
The air condioner’s circuit board (PCB) is designed with a fuse to provide overcurrent protecon.
The specificaons of the fuse are printed on the circuit board ,examples of such are T5A/250VAC and
T10A/250VAC.
As with any mechanical equipment, contact with sharp sheet metal edges can result in personal
injury. Take care while handling this equipment and wear gloves and protecve clothing.
Safety
Precautions
Page 5
•
Do not
clean the air condioner with combusble cleaning agents. Combusble cleaning agents
can cause fire or deformaon.
CLEANING AND MAINTENANCE WARNINGS
•
Turn off the device and disconnect the power before cleaning. Failure to do so can cause electrical
shock.
•
Do not
clean the air condioner with excessive amounts of water.
Loading ...
Loading ...
Loading ...