Loading ...
Loading ...
Loading ...
1 2
ON
1 2
ON
1 2
ON
1 2
ON
Address DIP switch: Static pressure DIP switch:
Dial code selecon Website address
Address dialing S1+S2: When the user uses the
centralized controller, the address dialing is
required.
Network address: The address silkscreen is NET
address, which is composed of a 16-bit address
rotary code S2 plus a two-digit DIP switch S1
[Set during engineering installaon, no network
funcon does not need to be set]
When S2 is 00 (the dialing code is not connected),
the network address value is the value of S2;
When S2 is 10 (corresponding to the switch of the
hardware connected to the 10K resistor), the
network address value is S2 plus 32;
When S2 is 01 (corresponding to the dial code of
the 5.1K resistor connected to the hardware is
turned on), the network address value is the
value of S2 plus 16;
When S2 is 11 (all dialing codes are on), the
network address value is the value of S2 plus 48.
Determined by dial code S2 1-10K 2-5.1K
S2 + 48
S2 + 32
S2 + 16
S2
SW4
This dialing code is only valid for 1-3. Composion
of binary code, respecvely corresponding to
different wind profile stac pressure.
000 is the default; 000/001/010/011/100/101/110/
111, with different capacies of indoor unit and
electric heang and PSC for selecon and use,
corresponding to different air volumes, see air
volume table for details.
Page 45
Wiring
Loading ...
Loading ...
Loading ...