Loading ...
Loading ...
Loading ...
5. Remove T1、T2 temperature sensor and
electronic expansion valve wire es.
6. Take out the evaporator and drain pan and
rotate 180°.
8. Reinstall the evaporator and drain pan.
7. Adjust the posion of the mounng parts.
9. Reinstall T1, T2 temperature sensor plug
electronic expansion valve and e up the
temperature sensor wires.
NOTE: The wire body needs to pass through the
wire groove from the water receiving tray and be
stuck on the hook of the water receiving tray.
Break the sponge.
Remove knockouts as
shown in the figure.
Page 21
Indoor Unit
Installation
Loading ...
Loading ...
Loading ...