Loading ...
Loading ...
Loading ...
Troubleshooting(continued)
Suddendrop ingasflow or
lowflame.
Flamesblowout.
%
, Check for gas in LPcylinder.
, Turn off knobs,wait30 seconds and lightgrill. If flames are still low,turnoff knobs
and LP cylindervalve.Disconnectregulator.Reconnectregulatorand leak-test.Turn
on LP cylindervalve,wait 30 secondsand then lightgrill.
, Turnoff knobsand LP cylindervalve.Disconnectcoupling nutfrom cylinder.
Reconnectand retry.
, Turnfront of grill to face wind or increaseflame height.
, Refill LPcylinder.
, Refer to "Suddendrop in gasflow" above.
, Outof gas.
, Excessflow valvetripped.
, Vaporlock at couplingnut/LP cylinderconnection.
, Highorgustingwinds.
, Lowon LPgas.
, Excessflow valvetripped.
, Greasebuildup.
, Excessivefat in meat.
, Excessivecookingtemperature.
, Greasetrapped byfood builduparound
burnersystem.
, Burnerand/or burnertubesare blocked.
, Greasebuildupor food particlesinend(s) of
carryovertube(s).
Flare-up. , Clean burnersand insideof grill/firebox.
, Trim fat from meat beforegrilling.
, Adjust(lower) temperatureaccordingly.
Persistentgreasefire. , Turn knobsto OFF.Turngas off at LP cylinder.Leavelid in positionand letfire
burn out.After grill cools,removeand cleanall parts.
Flashback (fire in , Turn knobsto OFF.Clean burnerand/or burnertubes.See burnercleaning
burnertube(s)), sectionof Useand Care.
Oneburnerdoes not light , Cleancarry-overtube(s)with wire brush.
from other burner(s).
Troubleshooting- Electronic ignition
SECTIONI
No sparksappearat any
electrodeswhen Electronic
IgnitionButtonis pressed;
no noise can be heardfrom
spark module.
SECTIONII
No sparksappearat any
electrodeswhen Electronic
IgnitionButtonis pressed;
noisecan be heardfrom spark
module.
SECTIONIII
Sparks are presentbut not at
all electrodesand/or notat
full strength
, Battery not installedproperly.
, Dead battery.
, Button assemblynot
installedproperly.
, Faultyspark module.
, Outputleadconnectionsnot
connected.
, Outputleadconnectionsnot
connected.
, Arcing to grill awayfrom
burner(s).
, Weakbattery.
, Electrodesare wet.
, Electrodescrackedor broken
"sparksat crack".
, Check batteryorientation.
, Has batterybeen used previously?
, Check to insurethreadsare properly
engaged.Buttonshouldtravel up and
downwithoutbinding.
, If no sparksare generatedwith new
batteryandgood wire connections,
moduleis faulty.
,Are output connectionson and tight?
, Are outputconnectionson andtight?
, If possible,observegrill in dark
location.Operateignitionsystemand
lookfor arcing betweenoutputwires
and grillframe.
, All sparkspresentbut weakor at
slow rate.
, Hasmoistureaccumulatedon electrode
and/or in burnerports?
, Inspectelectrodesfor cracks.
, Installbattery(makesurethat "+" and "-" connectorsare
orientedcorrectly,with "+" on cap end.)
, Replacebatterywith newalkalinebattery.
, Unscrewbuttoncapassemblyand reinstall,makingsure
threadsarealignedand engagedfully.
, Replacespark moduleassembly.
, Removeand reconnectall output connectionsat moduleand
electrodes.
, Removeand reconnectall outputconnectionsat moduleand
electrodes.
, If sparksare observedother than from burner(s),wire insulation
may bedamaged. Replacewires.
, Replacebatterywitha new alkalinebattery.
, Usepaper towelto removemoisture.
, Replacecrackedor brokenelectrodes.
38
Loading ...
Loading ...
Loading ...